Skip to main content ↑ ↓
Topic: Artix won't install on EXT4, BTRFS & F2FS (Read 10575 times) previous topic - next topic
0 Members and 5 Guests are viewing this topic.

Artix won't install on EXT4, BTRFS & F2FS

Hey guys, I recently got a harddrive for my Toshiba laptop & tried to install Artix, but I ran into a familiar error.
https://artixlinux.org/forum/index.php?topic=155  <-- is related, I think.
The previous problem ended up being solved on my end by updating the /etc/pacman.d/mirrorlist & adding in the new mirrors & running a sudo pacman -Syyu, but it would seem that this is not working this time around... The computer I am trying to install Artix on is a Toshiba Satellite L850D - I have Artix installed on my L745D no problem though, only difference between the two is that L850D is UEFI & L745D isn't. for some reason the USB is recognized as /dev/sda & the HDD is recognized as /dev/sdb, but I'm gonna assume that shouldn't really make much of a difference... Right?

And when I try to do F2FS, if I open up gparted afterwards it'll show a EXT4 filesystem where the F2FS should've been.

This is the error when I choose EXT4:

Installation Failed
Boost.Python error in job "machineid".
<class 'subprocess.CalledProcessError'>
Command 'dbus-uuidgen --ensure' returned non-zero exit status 127.
Traceback:
File "/usr/lib/calamares/modules/machineid/main.py", line 64, in run
  check_target_env_call(["dbus-uuidgen", "--ensure"])
File "<string>", line 2, in <module>

This is the error when I choose F2FS:

Installation Failed

The installer failed to create file system on partition /dev/sdb1
===================================================
Command: mkfs.f2fs /dev/sdb1
===================================================
F2FS-tools: mkfs.f2fs Ver: 1.9.0 (2017-09-21) Info: Disable heap-based policy info: Debug level = 0 info:
Label = Info: Trim is enabled /dev/sdb1 appears to contain an existing filesystem (ext4). Use the -f option to force overwrite.

And, when I try BTRFS, then I get this error:

Installation Failed

Boost.Python error in job "mount".

<class 'subprocess.CalledProcessError'>
Command '['btrfs', 'subvolume', 'create', '/tmp/calamares-root-wpn1btxe/@']'
returned non-zero exit status 1.
Traceback:

File "/usr/lib/calamares/modules/mount/main.py", line 132, in run
   mount_partitions(root_mount_point, partitions)

File "/usr/lib/calamares/modules/mount/main.py", line 78, in mount_partitions
   root_mount_point + '/@'])

File "/usr/lib/python3.6/subprocess.py" line 291, in check_call
  raise CalledProcessError(retcode, cmd)

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #1 –
I'm trying to do an EFI installation on a computer that has no operating system. It does not have Windows on it.
I'm just supposed to make my partitions as normal & make a FAT32 /boot/efi partition, right? I think I'm doing this right.... Am I missing something? I'm going to attetmpt XFS, JFS & Reiser to see what happens, as some of the error messages are different.

For XFS:

Installation Failed
Boost.Python error in job "machineid".

<class 'subprocess.CalledProcessError'>
Command 'dbus-uuidgen --ensure' returned non-zero exit status 127.
Traceback:
File "/usr/lib/calamares/modules/machineid/main.py", line 64, in run
  check_target_env_call(["dbus-uuidgen", "--ensure"])
File "<string>", line 2, in <module>

for JFS:

Boost.Python error in job "machineid".

<class 'subprocess.CalledProcessError'>
Command 'dbus-uuidgen --ensure' returned non-zero exit status 127.
Traceback:
File "/usr/lib/calamares/modules/machineid/main.py", line 64, in run
  check_target_env_call(["dbus-uuidgen", "--ensure"])
File "<string>", line 2, in <module>

and,
For ReiserFS its the exact same as those ^

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #2 –
Its probably that there is relevant information in the lines previous to the log that you are pasting, can you upload the whole log?

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #3 –
Quote from: damnwidget – on
Its probably that there is relevant information in the lines previous to the log that you are pasting, can you upload the whole log?

I don't know what you mean by "the whole log", these are just the errors that pop up...

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #4 –
I don't know if this is what you're looking for, but here.
Code: [Select]

sudo calamares
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
13:57:31 [1]: Calamares version: 3.1.8rc1.20171101-git-makepkg-783b0dc 
Translation: Calamares: Using system locale: "en_US"
13:57:32 [1]: Default font ===== 
Pixel size:    -1 
Point size:    9 
Point sizeF:   9 
Font family:   "Sans Serif" 
Metric height: 15 
13:57:32 [1]: Font height: 15 
13:57:32 [1]: Available languages: ("ar", "ast", "bg", "ca", "cs_CZ", "da", "de", 
"el", "en", "en_GB", "es_MX", "es", "eu", "fr", "he", "hi", "hr", "hu", "id", 
"is", "it_IT", "ja", "lt", "mr", "nl", "pl", "pt_BR", "pt_PT", "ro", "ru", "sk", 
"sv", "th", "tr_TR", "zh_CN", "zh_TW") 
13:57:32 [1]: CalamaresApplication thread: 0x55c36b83ad10 
13:57:32 [1]: Using log file: "/root/.cache/Calamares/Calamares/Calamares.log" 
13:57:32 [1]: Using Calamares settings file at "/etc/calamares/settings.conf" 
13:57:32 [1]: Using Calamares branding file at 
"/usr/share/calamares/branding/artix/branding.desc" 
13:57:32 [1]: WARNING: the selected branding component does not ship translations. 
13:57:32 [1]: Loaded branding component "artix" 
13:57:32 [1]: STARTUP: initQmlPath, initSettings, initBranding done 
13:57:32 [1]: STARTUP: initModuleManager: module init started 
13:57:32 [1]: STARTUP: initModuleManager: all modules init done 
13:57:32 [1]: STARTUP: initJobQueue done 
13:57:32 [1]: Available size QSize(1366, 736) 
13:57:32 [1]:   Proposed window size: 1024 540 
13:57:32 [1]: STARTUP: CalamaresWindow created; loadModules started 
13:57:32 [1]: Initial locale  "en_US" 
13:57:32 [1]: Welcome string false "Artix Linux \"rolling\"" 
13:57:32 [1]: ViewModule "welcome@welcome" loading complete. 
13:57:32 [1]: WARNING: guessLocaleConfiguration can't guess from an empty list. 
13:57:32 [1]: ViewModule "locale@locale" loading complete. 
13:57:32 [1]: WARNING: ckbcomp not found , keyboard preview disabled 
13:57:32 [1]: WARNING: ckbcomp not found , keyboard preview disabled 
13:57:32 [1]: ViewModule "keyboard@keyboard" loading complete. 
13:57:32 [1]: ViewModule "partition@partition" loading complete. 
13:57:32 [1]: ViewModule "users@users" loading complete. 
13:57:33 [1]: ViewModule "netinstall@netinstall" loading complete. 
13:57:33 [1]: ViewModule "summary@summary" loading complete. 
13:57:33 [1]: Module "partition@partition" already loaded. 
13:57:33 [1]: QML import paths: ("/usr/share/calamares/qml", "/usr/bin", 
"qrc:/qt-project.org/imports", "/usr/lib/qt/qml") 
13:57:33 [1]: Module "locale@locale" already loaded. 
13:57:33 [1]: Module "keyboard@keyboard" already loaded. 
13:57:33 [1]: Module "users@users" already loaded. 
13:57:33 [1]: FinishedPage() 
13:57:33 [1]: ViewModule "finished@finished" loading complete. 
13:57:33 [1]: STARTUP: loadModules for all modules done 
13:57:33 [1]: STARTUP: Window now visible and ProgressTreeView populated 
13:57:33 [1]: Need at least storage bytes: 8482560409 
13:57:34 [1]: Need at least ram bytes: 1073741824 
13:57:34 [1]: A battery exists, checking for mains power. 
13:57:34 [1]: RequirementsChecker output:  enoughStorage: true  enoughRam: true  
hasPower: true  hasInternet: true  isRoot: true 
13:57:34 [1]: xkbmap selection changed to:  "us" - "" 
13:57:35 [1]: WARNING: guessLocaleConfiguration can't guess from an empty list. 
13:57:35 [1]: WARNING: guessLocaleConfiguration can't guess from an empty list. 
13:57:35 [1]: WARNING: guessLocaleConfiguration can't guess from an empty list. 
13:57:35 [1]: WARNING: guessLocaleConfiguration can't guess from an empty list. 
13:57:35 [1]: Removing unsuitable devices: 2 candidates. 
13:57:35 [1]:   .. Removing device with iso9660 filesystem (probably a CD) on it 
"/dev/sda" 
13:57:35 [1]: LIST OF DETECTED DEVICES: 
13:57:35 [1]: node      capacity        name    prettyName 
13:57:35 [1]: "/dev/sdb" 160039272960 "ATA WDC WD1600BEVT-7" "ATA WDC WD1600BEVT-7 
– 149.05 GiB (/dev/sdb)" 
13:57:35 [1]: .. 1 devices detected. 
13:57:36 [1]: "Osprober lines, clean:\n" 
13:57:36 [1]: Found EFI system partition at "/dev/sdb3" 
13:57:36 [1]: Updating partitioning state widgets. 
13:57:36 [0]: QObject::setParent: Cannot set parent, new parent is in a different 
thread
13:57:36 [1]: Required  storage B: 11166914969 "(10.4GB)" 
13:57:36 [1]: Available storage B: 141167672320 "(131GB)" for "/dev/sdb1"    
length: 275718110    sectorsUsed: 0    fsType: "reiser" 
13:57:36 [1]: Partition "/dev/sdb1" authorized for resize + autopartition install. 
13:57:36 [1]: Required  storage B: 9019431321 "(8GB)" 
13:57:36 [1]: Storage capacity  B: 141167672320 "(131GB)" for "/dev/sdb1"    
length: 275718110 
13:57:36 [1]: Partition "/dev/sdb1" authorized for replace install. 
13:57:36 [1]: Required  storage B: 11166914969 "(10.4GB)" 
13:57:36 [1]: Available storage B: 420285952 "(0GB)" for "/dev/sdb3"    length: 
820879    sectorsUsed: 8    fsType: "fat32" 
13:57:36 [1]: Required  storage B: 9019431321 "(8GB)" 
13:57:36 [1]: Storage capacity  B: 420290048 "(0GB)" for "/dev/sdb3"    length: 
820879 
13:57:36 [1]: Updating partitioning preview widgets. 
13:57:57 [1]: Updating partitioning preview widgets. 
13:57:59 [1]: Choice applied:  4 
13:58:02 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:58:04 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:58:06 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:58:28 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:58:28 [0]: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2123, resource 
id: 8389701, major code: 40 (TranslateCoords), minor code: 0
13:58:37 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:58:49 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:59:06 [1]: WARNING: system is EFI but no EFI system partitions found. 
13:59:33 [1]: Found EFI system partition at "" 
14:00:06 [1]: Leaving netinstall, adding packages to be installed to global 
storage 
14:00:06 [1]: Processing 136 packages from netinstall. 
14:00:06 [1]:   .. 136 non-critical packages. 
14:00:06 [0]: QLayout: Attempting to add QLayout "" to QWidget "", which already 
has a layout
14:00:06 [0]: QObject::setParent: Cannot set parent, new parent is in a different 
thread
14:00:06 [1]: Creating FillGlobalStorageJob with bootLoader path "" 
14:00:06 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear 
all temporary mounts.\nClear mounts for partitioning operations on 
/dev/sdb\nDelete partition /dev/sdb3.\nDelete partition /dev/sdb2.\nDelete 
partition /dev/sdb1.\nCreate new 134627MB partition on /dev/sdb (ATA WDC 
WD1600BEVT-7) with file system btrfs.\nCreate new 17799MB partition on /dev/sdb 
(ATA WDC WD1600BEVT-7) with file system linuxswap.\nCreate new 200MB partition on 
/dev/sdb (ATA WDC WD1600BEVT-7) with file system fat32.\nSet flags on 200MB fat32 
partition.\nSet partition information" 
14:00:06 [1]: Gathering UUIDs for partitions that exist now. 
14:00:06 [1]: QHash(("", "")) 
14:00:06 [1]: Writing to GlobalStorage["partitions"] 
14:00:06 [1]: "" mtpoint: "/" fs: QVariant(QString, "btrfs") ( QVariant(QString, 
"btrfs") ) "" 
14:00:06 [1]: "" mtpoint: "" fs: QVariant(QString, "linuxswap") ( 
QVariant(QString, "linuxswap") ) "" 
14:00:06 [1]: "" mtpoint: "/boot/efi" fs: QVariant(QString, "fat32") ( 
QVariant(QString, "fat32") ) "" 
14:00:06 [1]: Gathering UUIDs for partitions that exist now. 
14:00:06 [1]: QHash(("", "")) 
14:00:06 [1]: Writing to GlobalStorage["partitions"] 
14:00:06 [1]: "" mtpoint: "/" fs: QVariant(QString, "btrfs") ( QVariant(QString, 
"btrfs") ) "" 
14:00:06 [1]: "" mtpoint: "" fs: QVariant(QString, "linuxswap") ( 
QVariant(QString, "linuxswap") ) "" 
14:00:06 [1]: "" mtpoint: "/boot/efi" fs: QVariant(QString, "fat32") ( 
QVariant(QString, "fat32") ) "" 
14:00:06 [1]: Summary widget is larger than viewport, enlarge by 96 to QSize(826, 
589) 
14:00:07 [0]: file:///usr/share/calamares/branding/artix/show.qml:50: 
ReferenceError: root is not defined
14:00:08 [1]: Creating FillGlobalStorageJob with bootLoader path "" 
14:00:08 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear 
all temporary mounts.\nClear mounts for partitioning operations on 
/dev/sdb\nDelete partition /dev/sdb3.\nDelete partition /dev/sdb2.\nDelete 
partition /dev/sdb1.\nCreate new 134627MB partition on /dev/sdb (ATA WDC 
WD1600BEVT-7) with file system btrfs.\nCreate new 17799MB partition on /dev/sdb 
(ATA WDC WD1600BEVT-7) with file system linuxswap.\nCreate new 200MB partition on 
/dev/sdb (ATA WDC WD1600BEVT-7) with file system fat32.\nSet flags on 200MB fat32 
partition.\nSet partition information" 
14:00:08 [0]: Starting job "Clear all temporary mounts." 
14:00:08 [1]: Opened mtab. Lines: 
14:00:08 [1]: "proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "dev /dev devtmpfs 
rw,nosuid,relatime,size=10240k,nr_inodes=1980604,mode=755 0 0" 
14:00:08 [1]: "run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0" 
14:00:08 [1]: "efivarfs /sys/firmware/efi/efivars efivarfs 
rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "/dev/sda1 /run/artix/bootmnt iso9660 ro,relatime 0 0" 
14:00:08 [1]: "cowspace /run/artix/cowspace tmpfs 
rw,relatime,size=262144k,mode=755 0 0" 
14:00:08 [1]: "overlay_root /run/artix/overlay_root tmpfs 
rw,relatime,size=11914068k,mode=755 0 0" 
14:00:08 [1]: "/dev/loop0 /run/artix/sfs/livefs squashfs ro,relatime 0 0" 
14:00:08 [1]: "/dev/loop1 /run/artix/sfs/desktopfs squashfs ro,relatime 0 0" 
14:00:08 [1]: "/dev/loop2 /run/artix/sfs/rootfs squashfs ro,relatime 0 0" 
14:00:08 [1]: "overlay / overlay 
rw,relatime,lowerdir=/run/artix/sfs/livefs:/run/artix/sfs/desktopfs:/run/artix/sfs/rootfs,upperdir=/run/artix/overlay_root/upper,workdir=/run/artix/overlay_root/work 
0 0" 
14:00:08 [1]: "mqueue /dev/mqueue mqueue rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "devpts /dev/pts devpts 
rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0" 
14:00:08 [1]: "shm /dev/shm tmpfs rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "securityfs /sys/kernel/security securityfs 
rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "debugfs /sys/kernel/debug debugfs rw,nosuid,nodev,noexec,relatime 0 
0" 
14:00:08 [1]: "configfs /sys/kernel/config configfs 
rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "cgroup_root /sys/fs/cgroup tmpfs 
rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755 0 0" 
14:00:08 [1]: "openrc /sys/fs/cgroup/openrc cgroup 
rw,nosuid,nodev,noexec,relatime,release_agent=/usr/lib/openrc/sh/cgroup-release-agent.sh,name=openrc 
0 0" 
14:00:08 [1]: "none /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime 
0 0" 
14:00:08 [1]: "cpuset /sys/fs/cgroup/cpuset cgroup 
rw,nosuid,nodev,noexec,relatime,cpuset 0 0" 
14:00:08 [1]: "cpu /sys/fs/cgroup/cpu cgroup rw,nosuid,nodev,noexec,relatime,cpu 0 
0" 
14:00:08 [1]: "cpuacct /sys/fs/cgroup/cpuacct cgroup 
rw,nosuid,nodev,noexec,relatime,cpuacct 0 0" 
14:00:08 [1]: "blkio /sys/fs/cgroup/blkio cgroup 
rw,nosuid,nodev,noexec,relatime,blkio 0 0" 
14:00:08 [1]: "memory /sys/fs/cgroup/memory cgroup 
rw,nosuid,nodev,noexec,relatime,memory 0 0" 
14:00:08 [1]: "devices /sys/fs/cgroup/devices cgroup 
rw,nosuid,nodev,noexec,relatime,devices 0 0" 
14:00:08 [1]: "freezer /sys/fs/cgroup/freezer cgroup 
rw,nosuid,nodev,noexec,relatime,freezer 0 0" 
14:00:08 [1]: "net_cls /sys/fs/cgroup/net_cls cgroup 
rw,nosuid,nodev,noexec,relatime,net_cls 0 0" 
14:00:08 [1]: "net_prio /sys/fs/cgroup/net_prio cgroup 
rw,nosuid,nodev,noexec,relatime,net_prio 0 0" 
14:00:08 [1]: "pids /sys/fs/cgroup/pids cgroup 
rw,nosuid,nodev,noexec,relatime,pids 0 0" 
14:00:08 [1]: "binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc 
rw,nosuid,nodev,noexec,relatime 0 0" 
14:00:08 [1]: "tmpfs /etc/pacman.d/gnupg tmpfs rw,relatime,size=10240k,mode=755 0 
0" 
14:00:08 [1]: "tmpfs /run/user/1002 tmpfs 
rw,nosuid,nodev,relatime,size=1588540k,mode=700,uid=1002,gid=1002 0 0" 
14:00:08 [1]: ClearTempMountsJob finished. Here's what was done:
 "" 
14:00:08 [0]: Starting job "Clear mounts for partitioning operations on /dev/sdb" 
14:00:08 [1]: ClearMountsJob finished. Here's what was done:
 "Successfully disabled swap /dev/sdb2." 
14:00:08 [0]: Starting job "Delete partition /dev/sdb3." 
14:00:09 [0]: Starting job "Delete partition /dev/sdb2." 
14:00:09 [0]: Starting job "Delete partition /dev/sdb1." 
14:00:09 [0]: Starting job "Create new 134627MB partition on /dev/sdb (ATA WDC 
WD1600BEVT-7) with file system btrfs." 
14:00:10 [0]: Starting job "Create new 17799MB partition on /dev/sdb (ATA WDC 
WD1600BEVT-7) with file system linuxswap." 
14:00:10 [0]: Starting job "Create new 200MB partition on /dev/sdb (ATA WDC 
WD1600BEVT-7) with file system fat32." 
14:00:12 [0]: Starting job "Set flags on partition /dev/sdb3." 
14:00:12 [0]: Starting job "Set partition information" 
14:00:12 [1]: Gathering UUIDs for partitions that exist now. 
14:00:13 [1]: QHash(("/dev/sdb2", 
"74591ad8-818d-404d-acfc-3e6dd1ff228d")("/dev/sdb3", "96B0-441E")("/dev/sdb1", 
"5a232de7-9801-4510-903e-ff105f579112")) 
14:00:13 [1]: Writing to GlobalStorage["partitions"] 
14:00:13 [1]: "/dev/sdb1" mtpoint: "/" fs: QVariant(QString, "btrfs") ( 
QVariant(QString, "btrfs") ) "5a232de7-9801-4510-903e-ff105f579112" 
14:00:13 [1]: "/dev/sdb2" mtpoint: "" fs: QVariant(QString, "linuxswap") ( 
QVariant(QString, "linuxswap") ) "74591ad8-818d-404d-acfc-3e6dd1ff228d" 
14:00:13 [1]: "/dev/sdb3" mtpoint: "/boot/efi" fs: QVariant(QString, "fat32") ( 
QVariant(QString, "fat32") ) "96B0-441E" 
14:00:13 [1]: FillGlobalStorageJob writing empty bootLoader value 
14:00:13 [0]: Starting job "mount" 
14:00:13 [1]: Job file "/usr/lib/calamares/modules/mount/main.py" 
14:00:13 [1]: Job "mount" (doc) -> "Define mountpoints." 
mount: /tmp/calamares-root-i3tjndf4: unknown filesystem type 'btrfs'.
ERROR: not a btrfs filesystem: /tmp/calamares-root-i3tjndf4
14:00:13 [1]: tbMsg "  File &quot;/usr/lib/calamares/modules/mount/main.py&quot;, 
line 132, in run\n    mount_partitions(root_mount_point, partitions)\n\n  File 
&quot;/usr/lib/calamares/modules/mount/main.py&quot;, line 78, in 
mount_partitions\n    root_mount_point + '/@'])\n\n  File 
&quot;/usr/lib/python3.6/subprocess.py&quot;, line 291, in check_call\n    raise 
CalledProcessError(retcode, cmd)\n" 
14:00:13 [0]: Installation failed: 
14:00:13 [0]: - message: "Boost.Python error in job \"mount\"." 
14:00:13 [0]: - details: "<div><strong>&lt;class 
'subprocess.CalledProcessError'&gt;</strong></div><div>Command '['btrfs', 
'subvolume', 'create', '/tmp/calamares-root-i3tjndf4/@']' returned non-zero exit 
status 1.</div><div>Traceback:</div><div><pre>  File 
&quot;/usr/lib/calamares/modules/mount/main.py&quot;, line 132, in run\n    
mount_partitions(root_mount_point, partitions)\n\n  File 
&quot;/usr/lib/calamares/modules/mount/main.py&quot;, line 78, in 
mount_partitions\n    root_mount_point + '/@'])\n\n  File 
&quot;/usr/lib/python3.6/subprocess.py&quot;, line 291, in check_call\n    raise 
CalledProcessError(retcode, cmd)\n</pre></div>" 
14:00:13 [0]: Calamares will quit when the dialog closes. 
14:00:13 [1]: FinishedPage::setUpRestart()
[Edited by an admin: code blocks]
[Sorry, I'm still really new to using forums, I tried to figure that out but couldn't do it right & was in a rush]

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #5 –
Hello,

I can confirm this error:
Code: [Select]
Installation Failed
Boost.Python error in job "machineid".
<class 'subprocess.CalledProcessError'>
Command 'dbus-uuidgen --ensure' returned non-zero exit status 127.
Traceback:
File "/usr/lib/calamares/modules/machineid/main.py", line 64, in run
  check_target_env_call(["dbus-uuidgen", "--ensure"])
File "<string>", line 2, in <module>

I've tried to install from a Stick with current lxqt iso
1) I've select whole ssd for installation with automatic partitioning and get this error
2) I've select whole ssd and do a manual partitioning with GPT, bios_grub, ext4 and swap and get this error

I'll try it with another stick amd will give further feedback.

Kind regards,
  Holger

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #6 –
Sorry, but also with another USB-Stick no success, same error.

Hmm, is there a possibility to install artix without calamares?

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #7 –
Please try to do with the installation again. The issue was more likely coming from this and should have been fixed by now...

Quote from: robin0800 – on
The lxqt iso is broken today because Criss Cromer's signature is wrong.
The file in question is "libxfont2" and is in the world repo.
Please Fix.
If I can hit that bullseye, the rest of the dominoes will fall like a house of cards. Checkmate!

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #9 –
Quote from: thefallenrat – on
Please try to do with the installation again. The issue was more likely coming from this and should have been fixed by now...

Quote from: thefallenrat – on
Please try to do with the installation again. The issue was more likely coming from this and should have been fixed by now...

"The lxqt iso is broken today because Criss Cromer's signature is wrong.
The file in question is "libxfont2" and is in the world repo.
Please Fix."

After numerous unsuccessful attempts to install I gave up and tried instead to convert my Manjaro OpenRc partition to Artix .
Everything seemed to work except I was unable to install Artix keyring due to Criss Crommer's signature error.
What is the fix for that?
 

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #10 –
Quote from: 7of9 – on
After numerous unsuccessful attempts to install I gave up and tried instead to convert my Manjaro OpenRc partition to Artix .
Everything seemed to work except I was unable to install Artix keyring due to Criss Crommer's signature error.
What is the fix for that?

I can download and installed from the mirror just fine :

Code: [Select]
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 artix-keyring-20170805-1-any                                                  30.4 KiB  85.0K/s 00:00 [------------------------------------------------------------] 100%
(1/1) checking keys in keyring                                                                         [------------------------------------------------------------] 100%
(1/1) checking package integrity                                                                       [------------------------------------------------------------] 100%
(1/1) loading package files                                                                            [------------------------------------------------------------] 100%
(1/1) checking for file conflicts                                                                      [------------------------------------------------------------] 100%
(1/1) checking available disk space                                                                    [------------------------------------------------------------] 100%
:: Processing package changes...
(1/1) reinstalling artix-keyring                                                                       [------------------------------------------------------------] 100%
==> Appending keys from artix.gpg...
==> Locally signing trusted keys in keyring...
  -> Locally signing key 8AC1470E584E6AAB0BBBAC3FED587B6247A4152D...
  -> Locally signing key 2C69BCE8163847BC56401FD2CF18A351C0705F6A...
  -> Locally signing key 664187F32A958D0ED06530067BFAD0C0864DA8E8...
  -> Locally signing key 80E461C30BE40AD3EFB57E18EA690BC73A4F1094...
==> Importing owner trust values...
==> Updating trust database...
gpg: next trustdb check due at 2018-06-01

Can you at least give the full output of pacman failed command here. Is it invalid error or marginal error?
If I can hit that bullseye, the rest of the dominoes will fall like a house of cards. Checkmate!

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #11 –
Quote from: thefallenrat – on
I can download and installed from the mirror just fine :


Can you at least give the full output of pacman failed command here. Is it invalid error or marginal error?
This is what I get:

error: could not register 'extra' database (database already registered)
error: could not register 'community' database (database already registered)
resolving dependencies...
looking for conflicting packages...

Packages (1) artix-keyring-20170805-1

Total Download Size:   0.03 MiB
Total Installed Size:  0.06 MiB

:: Proceed with installation? [Y/n]
:: Retrieving packages...
 artix-keyring-20170...    30.4 KiB   253K/s 00:00 [######################] 100%
(1/1) checking keys in keyring                     [######################] 100%
(1/1) checking package integrity                   [######################] 100%
error: artix-keyring: signature from "Chris Cromer <[email protected]>" is unknown trust
:: File /var/cache/pacman/pkg/artix-keyring-20170805-1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #12 –
Its still not working... Not sure why, seems I can't install Artix on this laptop... exact same errors.

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #13 –
@7of9 @kenny_w Please enable world-testing in your /etc/pacman.conf before doing installations again..
If I can hit that bullseye, the rest of the dominoes will fall like a house of cards. Checkmate!

Re: Artix won't install on EXT4, BTRFS & F2FS

Reply #14 –
Quote from: thefallenrat – on
@7of9 @kenny_w Please enable world-testing in your /etc/pacman.conf before doing installations again..
Now I am getting this when installing keyring

Code: [Select]
pacman -S artix-keyring
:: Some packages should be upgraded first...
resolving dependencies...
looking for conflicting packages...

Packages (1) archlinux-keyring-20171020-1

Total Download Size:    0.60 MiB
Total Installed Size:   0.86 MiB
Net Upgrade Size:      -0.03 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 archlinux-keyring-2...   619.4 KiB   474K/s 00:01 [######################] 100%
(1/1) checking keys in keyring                     [######################] 100%
downloading required keys...
error: key "1247D995F165BBAC" could not be looked up remotely
error: required key missing from keyring
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.

resolving dependencies...
looking for conflicting packages...

Packages (1) artix-keyring-20170805-1

Total Download Size:   0.03 MiB
Total Installed Size:  0.06 MiB

:: Proceed with installation? [Y/n] 
:: Retrieving packages...
 artix-keyring-20170...    30.4 KiB   212K/s 00:00 [######################] 100%
(1/1) checking keys in keyring                     [######################] 100%
downloading required keys...
error: key "FA91071797BEEEC2" could not be looked up remotely
error: required key missing from keyring
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.

[EDIT: code tags]