So far this is what I've got:
pkgname=dolphin-emu-fresh
pkgver=0
pkgrel=1
pkgdesc='A GameCube / Wii / Triforce emulator'
arch=('x86_64')
url='http://www.dolphin-emu.org/'
license=('GPL')
depends=('alsa-lib' 'bluez-libs' 'cairo' 'enet' 'gcc-libs' 'gdk-pixbuf2'
'glib2' 'glibc' 'gtk2' 'hidapi' 'libevdev' 'libgl' 'libpng' 'libpulse'
'libsm' 'libx11' 'libxi' 'libxrandr' 'libxxf86vm' 'lzo' 'mbedtls'
'miniupnpc' 'pango' 'sfml' 'zlib' 'pulseaudio' 'ffmpeg' 'pugixml'
'bluez' 'bluez-utils-compat' 'bluez-firmware' 'bluez-plugins'
'bluez-libs' 'bluez-qt' 'bluez-tools' 'bluez-openrc' 'curl' 'xorg-xinput'
'libeudev' 'libusb' 'libgusb' 'libusb-compat' 'lib32-libusb' 'libtiger'
'pangomm' 'pangox-compat' 'libglvnd' 'sndio' 'alsa-plugins' 'alsa-firmware'
'alsa-utils' 'alsa-lib' 'pulseaudio-alsa' 'alsa-oss')
makedepends=('cmake' 'git' 'qt5-base' 'pango')
source=('dolphin-emu::git+https://github.com/dolphin-emu/dolphin.git')
sha256sums=('SKIP')
git clone https://github.com/dolphin-emu/dolphin.git
cd dolphin && mkdir -p build && cd build
cmake -DOpenGL_GL_PREFERENCE=GLVND -DUSE_X11=1 -DUSE_EGL=1 -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_QT2=TRUE -DCMAKE_BUILD_TYPE=Release ..
make -j48
what is the 'proper' way to do a make install in a PKGBUILD? not sure how to determine this
I'm doing this in small steps, adding things as I learn what they do, once I can understand how a PKGBUILD ends up looking like most PKGBUILDs do, then I'll be able to write them easy.
here is the original pkgbuild:
# Maintainer: Maxime Gauduin <[email protected]>
# Contributor: Lightning <[email protected]>
pkgbase=dolphin-emu-git
pkgname=('dolphin-emu-git' 'dolphin-emu-cli-git' 'dolphin-emu-wx-git')
pkgver=5.0.r7139.ad836b9071
pkgrel=1
pkgdesc='A GameCube / Wii / Triforce emulator'
arch=('x86_64')
url='http://www.dolphin-emu.org/'
license=('GPL')
depends=('alsa-lib' 'bluez-libs' 'enet' 'gcc-libs' 'gdk-pixbuf2' 'glib2'
'glibc' 'hidapi' 'libevdev' 'libgl' 'libpng' 'libpulse' 'libsm'
'libx11' 'libxi' 'libxrandr' 'libxxf86vm' 'lzo' 'mbedtls' 'miniupnpc'
'qt5-base' 'sfml' 'zlib'
'libavcodec.so' 'libavformat.so' 'libavutil.so' 'libcurl.so'
'libswscale.so' 'libudev.so' 'libusb-1.0.so')
makedepends=('cairo' 'cmake' 'git' 'gtk2' 'pango')
optdepends=('pulseaudio: PulseAudio backend')
options=('!emptydirs')
source=('dolphin-emu::git+https://github.com/dolphin-emu/dolphin.git')
sha256sums=('SKIP')
pkgver() {
cd dolphin-emu
git describe | sed 's/-/.r/; s/-g/./'
}
prepare() {
cd dolphin-emu
if [[ -d build ]]; then
rm -rf build
fi
mkdir build
}
build() {
cd dolphin-emu/build
cmake .. \
-DCMAKE_INSTALL_PREFIX='/usr' \
-DENABLE_QT2='TRUE' \
-DUSE_SHARED_ENET='TRUE' \
-DDISTRIBUTOR='aur.archlinux.org'
make
}
package_dolphin-emu-git() {
provides=('dolphin-emu')
conflicts=('dolphin-emu')
cd dolphin-emu/build
make DESTDIR="${pkgdir}" install
rm -rf "${pkgdir}"/usr/bin/dolphin-emu-{nogui,wx}
install -Dm 644 ../Data/51-usb-device.rules -t "${pkgdir}"/usr/lib/udev/rules.d/
}
package_dolphin-emu-cli-git() {
depends=('dolphin-emu-git')
cd dolphin-emu/build
install -dm 755 "${pkgdir}"/usr/bin
install -m 755 Binaries/dolphin-emu-nogui "${pkgdir}"/usr/bin/dolphin-emu-cli
}
package_dolphin-emu-wx-git() {
depends=('cairo' 'dolphin-emu-git' 'gtk2' 'pango')
cd dolphin-emu/build
install -dm 755 "${pkgdir}"/usr/bin
install -m 755 Binaries/dolphin-emu-wx "${pkgdir}"/usr/bin/
}
# vim: ts=2 sw=2 et:
I'm getting an error about install not being able to set permissions when I use the
install -Dm 644 ../Data/51-usb-device.rules -t "${pkgdir}"/usr/lib/udev/rules.d/
Install the project...
-- Install configuration: "Release"
-- Up-to-date: /usr/share/dolphin-emu/sys
CMake Error at cmake_install.cmake:49 (file):
file INSTALL cannot set permissions on "/usr/share/dolphin-emu/sys"
make: *** [Makefile:108: install] Error 1
Topic: Dolphin-emu, citra, medusa-emu, cmake flags and PKGBUILD (Read 1883 times)
previous topic - next topic
