Skip to main content ↑ ↓
Topic: Neww Hardware Shopping (Read 905 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Neww Hardware Shopping

What do you guys this of this?
https://edge.compulab.com/store/tensor-i22-build-to-order/

      Tensor-I22 build-to-order
Edit options

CPU:
    Core i7-1185G7E | 4 Cores, 1.8/2.8GHz, 15W/28W [C1185]  + $ 650.89
RAM:
    64GB DDR4 SODIMM (2x 32GB) [D64]  + $ 207.12
M.2 NVMe Storage:
    NVMe 2TB | 2TB M.2 Key-M NVMe module [N2T]  + $ 187.47
Pre-installed operating system:
    Not installed 
Audio:
    No analog audio (Audio via HDMI/DP display outputs is always available) 
TPM:
    Not installed (Intel PTT with full TPM 2.0 capabilities is always available) 
M.2 WiFi module:
    Not installed 
M.2 Key-B Modem:
    Not installed 
Extension modules (TELs) - addition of interfaces to the basic configuration:
    Additional SATA M.2 slot (for M.2 Key-B+M up to 2280, SATA III) [FFS]  + $ 33.80
DC input:
    Standard DC input 12V 
Temperature range:
    Commercial: 0°C to +45 
Standard choice enclosure :
    Extended heat dissipation enclosure [EW30-ECR20]  + $ 32.01

Re: Neww Hardware Shopping

Reply #1 –
Not bad, but I'd go for a Ryzen over a Core CPU any single day; I see lots of 'fanless industrial mini-PCs'  with Ryzen too.

Re: Neww Hardware Shopping

Reply #2 –
^Yes, you may never know which batch of the faulty Core lineup exactly you're gonna get. The problem with Ryzen platform tho is that it is kind of hard to get this kind of custom embedded/low power stuff. Also like, WHAT THE ACTUAL FUCK, why is that CPU over 600$ (DOLLARS)? It's freaking ancient by today's standards.

Re: Neww Hardware Shopping

Reply #3 –
do you think it could handly the compiling needed  for artix builds?

Re: Neww Hardware Shopping

Reply #4 –
Quote from: Shoun2137 – on
Also like, WHAT THE ACTUAL FUCK, why is that CPU over 600$ (DOLLARS)? It's freaking ancient by today's standards.

Such systems are not intended for ordinary mouse pushers.

Once set up and properly maintained, such systems run for decades without any problems, so the ‘outdated, overpriced CPU’ is a bargain.
This is where the real advantage of opensource comes to the fore.

https://www.intel.com/content/www/us/en/developer/articles/community/an-inside-look-at-open-source-culture.html
"Wer alles kann, macht nichts richtig"

Artix USE="runit openrc slim openbox lxde gtk2 qt4 qt5 qt6 conky
-gtk3 -gtk4 -adwaita{cursors,themes,icons} -gnome3 -kde -plasma -wayland "

Re: Neww Hardware Shopping

Reply #5 –
Quote from: lq – on
Such systems are not intended for ordinary mouse pushers.

Once set up and properly maintained, such systems run for decades without any problems, so the ‘outdated, overpriced CPU’ is a bargain.
This is where the real advantage of opensource comes to the fore.
True. I don't know that the intended usecase, but I still believe this as 4 core CPU for this kind of price and as I said, considering intel drama with all of those faulty cpus doesn't make this any more trustworthy...
Quote from: mrbrklyn – on
do you think it could handly the compiling needed  for artix builds?
Any particular reason you need a thin embedded client of this class? As for the question, if you need to compile anything on such a weak CPU (Multicore wise), then I'd look for something with more juice...

Re: Neww Hardware Shopping

Reply #6 –
they are virtually  indestructible, are low power and save lots of money and last  longer because they don't depend on a fan.  It is not unusual for me to leave a server up and running for 15 years.
 

Re: Neww Hardware Shopping

Reply #7 –
"save lots of money"

can someone show me the math on that? 600$ is a lot of KW

Re: Neww Hardware Shopping

Reply #8 –
. Also standard is Internal TPM 2.0 and a 12V/60W power supply unit (PSU).

what do you mean?

Re: Neww Hardware Shopping

Reply #9 –
As noted in other threads, used g5's can be set to pull 35w max, are far more powerful, expandable, fixable, and can be expected to perform at least as long, right? at less than 150 for a full system.

But they have a larger footprint i guess?

Re: Neww Hardware Shopping

Reply #10 –
Fixable it great.  Indestructible is what I prefer.  I didn't mean to enter someone elses previous flame war.  I  was just looking for hardware to install for the Artix compiling that is not a full tower that sucks up 300 watts.  I am not getting a mac... I am bias and bigoted against Macs.

Re: Neww Hardware Shopping

Reply #11 –
Quote from: mrbrklyn – on
Fixable it great.  Indestructible is what I prefer.
IME nothing does not break, so i like fixable.
Quote from: mrbrklyn – on
  I didn't mean to enter someone elses previous flame war.
Nor did I. I was interested in your points.
Quote from: mrbrklyn – on
I  was just looking for hardware to install for the Artix compiling that is not a full tower that sucks up 300 watts.
Me too.
Quote from: mrbrklyn – on
I am not getting a mac... I am bias and bigoted against Macs.
I apologize for being unclear. I was referring to the EliteDesk Ryzen mini PC's that take less than 100w.
nous had recommended them as building beasts, and they are cheap.

Here is a random example from amazon https://www.amazon.com/s?url=search-alias%3Daps&field-keywords=EliteDesk+705+G5

Re: Neww Hardware Shopping

Reply #12 –
thanks for the tip

Re: Neww Hardware Shopping

Reply #13 –
I am looking to get 64GB of ram and about 8 TB of storage.  I really want to buy this once, and never have to worry about it again.  I haven't been feeling well and I want it to be idiot proof by the NYLXS people if something happens to me, and for it to be installed and useful for 15 years.

Re: Neww Hardware Shopping

Reply #14 –
train a replacement.

I feel sad at the news of your not feeling well.

64gb and 8T is kinda a beast.

@cat herders of linux had a few of these machines she got in a lot and needed to sell, but I have not seen them for a bit.
 
Artix forum uses a single cookie to remember youOK