I'll do my best to self troubleshoot and update this thread while also (hopefully) keeping everything clean so others can chime in with suggestions. My time is extremely splintered at the moment and my linux knowledge is still in the "functional, but dangerous", but i'm hoping that this will lead to bug detection or at least isolate some idiocy on my part.
Thank you.
System SetupCPU: AMD Ryzen 5 2400g (not using graphics)
Video: Vega 56 with xf86-video-amdgpu and mesa
OS: lxqt with openRC and sddm
cpu:
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3580 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3425 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3097 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3466 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 2450 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 2509 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3333 MHz
AMD Ryzen 5 2400G with Radeon Vega Graphics, 3500 MHz
keyboard:
/dev/input/event3 ErgoDox EZ
mouse:
/dev/input/mice Logitech G9 Laser Mouse
/dev/input/mice ErgoDox EZ
monitor:
LG ELECTRONICS LG ULTRAWIDE
graphics card:
ATI Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
ATI Vega 10 XL/XT [Radeon RX Vega 56/64]
sound:
ATI Raven/Raven2/Fenghuang HDMI/DP Audio Controller
AMD Family 17h (Models 10h-1fh) HD Audio Controller
ATI Vega 10 HDMI Audio [Radeon Vega 56/64]
storage:
AMD 300 Series Chipset SATA Controller
AMD FCH SATA Controller [AHCI mode]
network:
enp27s0 Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
network interface:
enp27s0 Ethernet network interface
lo Loopback network interface
disk:
/dev/sdb CT1000MX500SSD1
/dev/sdc Disk
/dev/sda KINGSTON SV300S3
partition:
/dev/sdc1 Partition
/dev/sda1 Partition
/dev/sda4 Partition
usb controller:
AMD Raven USB 3.1
AMD Raven USB 3.1
AMD 300 Series Chipset USB 3.1 xHCI Controller
bios:
BIOS
bridge:
AMD Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
AMD Raven/Raven2 Device 24: Function 3
AMD Raven/Raven2 PCIe GPP Bridge [6:0]
AMD Raven/Raven2 Device 24: Function 1
AMD Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
AMD FCH LPC Bridge
AMD 300 Series Chipset PCIe Port
AMD Raven/Raven2 Device 24: Function 6
AMD Raven/Raven2 Root Complex
AMD Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A
AMD Raven/Raven2 Device 24: Function 4
AMD PCI bridge
AMD 300 Series Chipset PCIe Port
AMD Raven/Raven2 Device 24: Function 2
AMD Raven/Raven2 PCIe GPP Bridge [6:0]
AMD 300 Series Chipset PCIe Port
AMD Raven/Raven2 Device 24: Function 0
AMD PCI bridge
AMD Raven/Raven2 Device 24: Function 7
AMD PCI bridge
AMD Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B
AMD Raven/Raven2 Device 24: Function 5
AMD 300 Series Chipset PCIe Port
hub:
Texas Instruments TUSB8041 4-Port Hub
Linux Foundation 3.0 root hub
Genesys Logic 4-port hub
Linux Foundation 2.0 root hub
Texas Instruments TUSB8041 4-Port Hub
Linux Foundation 3.0 root hub
Linux Foundation 2.0 root hub
Genesys Logic hub
Linux Foundation 2.0 root hub
Linux Foundation 3.0 root hub
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Keyboard controller
/dev/lp0 Parallel controller
AMD Raven/Raven2 IOMMU
AMD FCH SMBus Controller
AMD Family 17h (Models 10h-1fh) Platform Security Processor
Serial controller
/dev/input/event5 ErgoDox EZ
/dev/input/event9 Logitech G9 Laser Mouse
Problem:System boots to tty1, tty7 shows blinking cursor. Also happens on a fresh install following artix base install wiki. Problem does not happen with other OS (Ubuntu 20.04)
Additional Details:- Both Artix installs seem to hang on during shutdown at: "kvm: exiting hardware virtualization
- Original Artix install had the following error: "Error stopping sddm" - new install of Artix does not
- Original Artix install had the following error: "ERROR: xdm failed to stop" - new install of Artix does not
What I've tried- Wait it out for updates
- Tried manual startx. Resulted in a waiting for connection with .. repeated each line
- Tried manual lxqt-session. Resulted in a missing xcb entry even though it was found.
- Installed fresh Artix - Same problem above
- Installed another OS (Ubuntu) - Works
Things to try when I have time- downgrade the kernal
- downgrade mesa
I will update this more as I get time and find my notes. Thank you for any feedback or questions.
Put here /var/log/Xorg.0.log
cat /var/log/Xorg.0.log
Of course you have installed sddm-openrc, what say openrc?
rc-status
what happens at starting sddm-openrc? Fail it or start and fail Xorg?
That is really a lost cause, if you not know if xserver start or not.
/var/log/Xorg.0.log (part 1)
Fresh install doesn't have an Xorg.0.log - 99% sure I ran 'pacman -S xorg --ignore xorg-server-xdmx'
I will try again to be absolutely sure.
[ 2240.645] (--) Log file renamed from "/var/log/Xorg.pid-14578.log" to "/var/log/Xorg.0.log"
[ 2240.645]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 2240.645] Build Operating System: Linux Artix Linux
[ 2240.645] Current Operating System: Linux Lonestar 5.6.14-artix1-1 #1 SMP PREEMPT Thu, 21 May 2020 14:13:45 +0000 x86_64
[ 2240.645] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/lonestar_LVM-Artix rw quiet
[ 2240.645] Build Date: 05 May 2020 11:15:38AM
[ 2240.645]
[ 2240.645] Current version of pixman: 0.40.0
[ 2240.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2240.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2240.646] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 11 18:44:30 2020
[ 2240.646] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2240.646] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2240.646] (==) No Layout section. Using the first Screen section.
[ 2240.646] (==) No screen section available. Using defaults.
[ 2240.646] (**) |-->Screen "Default Screen Section" (0)
[ 2240.646] (**) | |-->Monitor "<default monitor>"
[ 2240.646] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2240.646] (==) Automatically adding devices
[ 2240.646] (==) Automatically enabling devices
[ 2240.646] (==) Automatically adding GPU devices
[ 2240.646] (==) Automatically binding GPU devices
[ 2240.646] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2240.646] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 2240.646] Entry deleted from font path.
[ 2240.646] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 2240.646] Entry deleted from font path.
[ 2240.646] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 2240.646] Entry deleted from font path.
[ 2240.646] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 2240.646] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 2240.646] Entry deleted from font path.
[ 2240.646] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 2240.646] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 2240.646] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2240.646] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2240.647] (II) Module ABI versions:
[ 2240.647] X.Org ANSI C Emulation: 0.4
[ 2240.647] X.Org Video Driver: 24.1
[ 2240.647] X.Org XInput driver : 24.1
[ 2240.647] X.Org Server Extension : 10.0
[ 2240.647] (++) using VT number 7
[ 2240.647] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 2240.647] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2240.662] (--) PCI:*(18@0:0:0) 1002:687f:1462:3681 rev 195, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe700000/524288, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 2240.662] (--) PCI: (56@0:0:0) 1002:15dd:1462:7a38 rev 198, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xfe400000/524288, I/O @ 0x0000d000/256
[ 2240.662] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2240.662] (II) LoadModule: "glx"
[ 2240.662] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2240.664] (II) Module glx: vendor="X.Org Foundation"
[ 2240.664] compiled for 1.20.8, module version = 1.0.0
[ 2240.664] ABI class: X.Org Server Extension, version 10.0
[ 2240.664] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 2240.664] loading driver: amdgpu
[ 2240.664] (==) Matched amdgpu as autoconfigured driver 0
[ 2240.664] (==) Matched ati as autoconfigured driver 1
[ 2240.664] (==) Matched modesetting as autoconfigured driver 2
[ 2240.664] (==) Matched fbdev as autoconfigured driver 3
[ 2240.664] (==) Matched vesa as autoconfigured driver 4
[ 2240.664] (==) Assigned the driver to the xf86ConfigLayout
[ 2240.664] (II) LoadModule: "amdgpu"
[ 2240.664] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 2240.664] (II) Module amdgpu: vendor="X.Org Foundation"
[ 2240.664] compiled for 1.20.8, module version = 19.1.0
[ 2240.664] Module class: X.Org Video Driver
[ 2240.664] ABI class: X.Org Video Driver, version 24.1
[ 2240.664] (II) LoadModule: "ati"
[ 2240.664] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2240.664] (II) Module ati: vendor="X.Org Foundation"
[ 2240.664] compiled for 1.20.8, module version = 19.1.0
[ 2240.664] Module class: X.Org Video Driver
[ 2240.665] ABI class: X.Org Video Driver, version 24.1
[ 2240.673] (II) LoadModule: "modesetting"
[ 2240.673] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2240.673] (II) Module modesetting: vendor="X.Org Foundation"
[ 2240.673] compiled for 1.20.8, module version = 1.20.8
[ 2240.673] Module class: X.Org Video Driver
[ 2240.673] ABI class: X.Org Video Driver, version 24.1
[ 2240.673] (II) LoadModule: "fbdev"
[ 2240.674] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2240.674] (II) Module fbdev: vendor="X.Org Foundation"
[ 2240.674] compiled for 1.20.8, module version = 0.5.0
[ 2240.674] Module class: X.Org Video Driver
[ 2240.674] ABI class: X.Org Video Driver, version 24.1
[ 2240.674] (II) LoadModule: "vesa"
[ 2240.674] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2240.674] (II) Module vesa: vendor="X.Org Foundation"
[ 2240.674] compiled for 1.20.8, module version = 2.4.0
[ 2240.674] Module class: X.Org Video Driver
[ 2240.674] ABI class: X.Org Video Driver, version 24.1
[ 2240.674] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 2240.674] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2240.674] (II) FBDEV: driver for framebuffer: fbdev
[ 2240.674] (II) VESA: driver for VESA chipsets: vesa
[ 2240.696] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 2240.696] (WW) Falling back to old probe method for modesetting
[ 2240.697] (WW) Falling back to old probe method for fbdev
[ 2240.697] (II) Loading sub module "fbdevhw"
[ 2240.697] (II) LoadModule: "fbdevhw"
[ 2240.697] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2240.697] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2240.697] compiled for 1.20.8, module version = 0.0.2
[ 2240.697] ABI class: X.Org Video Driver, version 24.1
[ 2240.697] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2240.697] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 2240.697] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2240.697] (==) AMDGPU(0): Default visual is TrueColor
[ 2240.697] (==) AMDGPU(0): RGB weight 888
[ 2240.697] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 2240.697] (--) AMDGPU(0): Chipset: "Radeon RX Vega" (ChipID = 0x687f)
[ 2240.697] (II) Loading sub module "fb"
[ 2240.697] (II) LoadModule: "fb"
[ 2240.697] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2240.697] (II) Module fb: vendor="X.Org Foundation"
[ 2240.697] compiled for 1.20.8, module version = 1.0.0
[ 2240.697] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2240.697] (II) Loading sub module "dri2"
[ 2240.697] (II) LoadModule: "dri2"
[ 2240.697] (II) Module "dri2" already built-in
[ 2240.721] (II) Loading sub module "glamoregl"
[ 2240.721] (II) LoadModule: "glamoregl"
[ 2240.721] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2240.723] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2240.723] compiled for 1.20.8, module version = 1.0.1
[ 2240.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2240.730] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX Vega (VEGA10, DRM 3.36.0, 5.6.14-artix1-1, LLVM 10.0.0)
[ 2240.730] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 2240.730] (==) AMDGPU(0): TearFree property default: auto
[ 2240.730] (==) AMDGPU(0): VariableRefresh: disabled
[ 2240.730] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 2240.730] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 2240.730] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 2240.730] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 2240.730] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 2240.740] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 2240.740] (II) AMDGPU(0): Manufacturer: GSM Model: 76fe Serial#: 481810
[ 2240.740] (II) AMDGPU(0): Year: 2017 Week: 4
[ 2240.740] (II) AMDGPU(0): EDID Version: 1.4
[ 2240.740] (II) AMDGPU(0): Digital Display Input
[ 2240.740] (II) AMDGPU(0): 8 bits per channel
[ 2240.740] (II) AMDGPU(0): Digital interface is DisplayPort
[ 2240.740] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 80 vert.: 34
[ 2240.740] (II) AMDGPU(0): Gamma: 2.20
[ 2240.740] (II) AMDGPU(0): DPMS capabilities: StandBy
[ 2240.740] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 2240.740] (II) AMDGPU(0): Default color space is primary color space
[ 2240.740] (II) AMDGPU(0): First detailed timing is preferred mode
[ 2240.740] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 2240.740] (II) AMDGPU(0): redX: 0.651 redY: 0.332 greenX: 0.307 greenY: 0.631
[ 2240.740] (II) AMDGPU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 2240.740] (II) AMDGPU(0): Supported established timings:
[ 2240.740] (II) AMDGPU(0): 640x480@60Hz
[ 2240.740] (II) AMDGPU(0): 640x480@75Hz
[ 2240.740] (II) AMDGPU(0): 800x600@60Hz
[ 2240.740] (II) AMDGPU(0): 800x600@75Hz
[ 2240.740] (II) AMDGPU(0): 832x624@75Hz
[ 2240.740] (II) AMDGPU(0): 1024x768@60Hz
[ 2240.740] (II) AMDGPU(0): 1024x768@75Hz
[ 2240.740] (II) AMDGPU(0): 1280x1024@75Hz
[ 2240.740] (II) AMDGPU(0): 1152x864@75Hz
[ 2240.740] (II) AMDGPU(0): Manufacturer's mask: 0
[ 2240.740] (II) AMDGPU(0): Supported standard timings:
[ 2240.740] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 75 vid: 53201
[ 2240.740] (II) AMDGPU(0): #1: hsize: 1920 vsize 1080 refresh: 100 vid: 59601
[ 2240.740] (II) AMDGPU(0): #2: hsize: 1920 vsize 1080 refresh: 120 vid: 64721
[ 2240.740] (II) AMDGPU(0): #3: hsize: 1600 vsize 900 refresh: 120 vid: 64681
[ 2240.740] (II) AMDGPU(0): #4: hsize: 1280 vsize 1024 refresh: 120 vid: 48257
[ 2240.740] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 120 vid: 64641
[ 2240.740] (II) AMDGPU(0): #6: hsize: 1024 vsize 768 refresh: 120 vid: 31841
[ 2240.740] (II) AMDGPU(0): #7: hsize: 1152 vsize 864 refresh: 120 vid: 31857
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 193.0 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2800 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1150 v_border: 0
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 243.0 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2800 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1158 v_border: 0
[ 2240.740] (II) AMDGPU(0): Ranges: V min: 56 V max: 144 Hz, H min: 30 H max: 164 kHz, PixClock max 455 MHz
[ 2240.740] (II) AMDGPU(0): Monitor name: LG ULTRAWIDE
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 308.0 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 1080 v_sync: 1092 v_sync_end 1102 v_blanking: 1133 v_border: 0
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 368.8 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 1080 v_sync: 1092 v_sync_end 1102 v_blanking: 1130 v_border: 0
[ 2240.740] (II) AMDGPU(0): Supported detailed timing:
[ 2240.740] (II) AMDGPU(0): clock: 442.6 MHz Image Size: 798 x 334 mm
[ 2240.740] (II) AMDGPU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2240.740] (II) AMDGPU(0): v_active: 1080 v_sync: 1092 v_sync_end 1102 v_blanking: 1130 v_border: 0
[ 2240.740] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 2240.740] (II) AMDGPU(0): EDID (in hex):
[ 2240.740] (II) AMDGPU(0): 00ffffffffffff001e6dfe76125a0700
[ 2240.740] (II) AMDGPU(0): 041b0104a55022789eca95a6554ea126
[ 2240.740] (II) AMDGPU(0): 0f5054256b80d1cfd1e8d1fca9fc81bc
[ 2240.740] (II) AMDGPU(0): 81fc617c717c644b00f0a03846403020
[ 2240.740] (II) AMDGPU(0): aa001e4e3100001aec5e00f0a0384e40
[ 2240.740] (II) AMDGPU(0): 3020aa001e4e3100001a000000fd0038
[ 2240.740] (II) AMDGPU(0): 901ea42d000a202020202020000000fc
[ 2240.740] (II) AMDGPU(0): 004c4720554c545241574944450a01da
[ 2240.740] (II) AMDGPU(0): 020316712309060749100403011f1359
[ 2240.740] (II) AMDGPU(0): da12830100008c0ad08a20e02d10103e
[ 2240.740] (II) AMDGPU(0): 96001e4e31000018507800a0a0383540
[ 2240.741] (II) AMDGPU(0): 3020ca001e4e3100001a139000a0a038
[ 2240.741] (II) AMDGPU(0): 32403020ca001e4e3100001ae4ac00a0
[ 2240.741] (II) AMDGPU(0): a03832403020ca001e4e3100001a0000
[ 2240.741] (II) AMDGPU(0): 00000000000000000000000000000000
[ 2240.741] (II) AMDGPU(0): 000000000000000000000000000000ea
[ 2240.741] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x59.9 193.00 2560 2608 2640 2800 1080 1090 1100 1150 +hsync -vsync (68.9 kHz eP)
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x144.0 442.60 2560 2608 2640 2720 1080 1092 1102 1130 +hsync -vsync (162.7 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x120.0 368.83 2560 2608 2640 2720 1080 1092 1102 1130 +hsync -vsync (135.6 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x99.9 308.00 2560 2608 2640 2720 1080 1092 1102 1133 +hsync -vsync (113.2 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x74.9 243.00 2560 2608 2640 2800 1080 1090 1100 1158 +hsync -vsync (86.8 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "2560x1080"x50.0 185.62 2560 3108 3152 3300 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1680x1050"x59.9 193.00 1680 2608 2640 2800 1050 1090 1100 1150 +hsync -vsync (68.9 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1440x900"x59.9 193.00 1440 2608 2640 2800 900 1090 1100 1150 +hsync -vsync (68.9 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1280x800"x59.9 193.00 1280 2608 2640 2800 800 1090 1100 1150 +hsync -vsync (68.9 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2240.741] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2240.741] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 2240.741] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 2240.741] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 2240.741] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 2240.741] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 2240.741] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 2240.741] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 2240.741] (II) AMDGPU(0): Using exact sizes for initial modes
[ 2240.741] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 2560x1080 +0+0
[ 2240.741] (II) AMDGPU(0): mem size init: gart size :1fe65f000 vram size: s:1fd076000 visible:e886000
[ 2240.741] (==) AMDGPU(0): DPI set to (96, 96)
[ 2240.741] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2240.741] (II) Loading sub module "ramdac"
[ 2240.741] (II) LoadModule: "ramdac"
[ 2240.741] (II) Module "ramdac" already built-in
[ 2240.741] (II) UnloadModule: "modesetting"
[ 2240.741] (II) Unloading modesetting
[ 2240.741] (II) UnloadModule: "fbdev"
[ 2240.741] (II) Unloading fbdev
[ 2240.741] (II) UnloadSubModule: "fbdevhw"
[ 2240.741] (II) Unloading fbdevhw
[ 2240.741] (II) UnloadModule: "vesa"
[ 2240.741] (II) Unloading vesa
[ 2240.741] (II) AMDGPU(0): [DRI2] Setup complete
[ 2240.741] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 2240.741] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 2240.741] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[ 2240.741] (II) AMDGPU(0): SYNC extension fences enabled
[ 2240.741] (II) AMDGPU(0): Present extension enabled
[ 2240.741] (==) AMDGPU(0): DRI3 enabled
[ 2240.741] (==) AMDGPU(0): Backing store enabled
[ 2240.741] (II) AMDGPU(0): Direct rendering enabled
[ 2240.749] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 2240.749] (II) AMDGPU(0): Acceleration enabled
[ 2240.749] (==) AMDGPU(0): DPMS enabled
[ 2240.749] (==) AMDGPU(0): Silken mouse disabled
[ 2240.749] (II) AMDGPU(0): Set up textured video (glamor)
[ 2240.758] (II) Initializing extension Generic Event Extension
[ 2240.759] (II) Initializing extension SHAPE
[ 2240.759] (II) Initializing extension MIT-SHM
[ 2240.759] (II) Initializing extension XInputExtension
[ 2240.759] (II) Initializing extension XTEST
[ 2240.759] (II) Initializing extension BIG-REQUESTS
[ 2240.759] (II) Initializing extension SYNC
[ 2240.759] (II) Initializing extension XKEYBOARD
[ 2240.759] (II) Initializing extension XC-MISC
[ 2240.759] (II) Initializing extension SECURITY
[ 2240.759] (II) Initializing extension XFIXES
[ 2240.759] (II) Initializing extension RENDER
[ 2240.759] (II) Initializing extension RANDR
[ 2240.759] (II) Initializing extension COMPOSITE
[ 2240.759] (II) Initializing extension DAMAGE
[ 2240.760] (II) Initializing extension MIT-SCREEN-SAVER
[ 2240.760] (II) Initializing extension DOUBLE-BUFFER
[ 2240.760] (II) Initializing extension RECORD
[ 2240.760] (II) Initializing extension DPMS
[ 2240.760] (II) Initializing extension Present
[ 2240.760] (II) Initializing extension DRI3
[ 2240.760] (II) Initializing extension X-Resource
[ 2240.760] (II) Initializing extension XVideo
[ 2240.760] (II) Initializing extension XVideo-MotionCompensation
[ 2240.760] (II) Initializing extension GLX
[ 2240.764] (II) AIGLX: Loaded and initialized radeonsi
[ 2240.764] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2240.764] (II) Initializing extension XFree86-VidModeExtension
[ 2240.764] (II) Initializing extension XFree86-DGA
[ 2240.764] (II) Initializing extension XFree86-DRI
[ 2240.764] (II) Initializing extension DRI2
[ 2240.765] (II) AMDGPU(0): Setting screen physical size to 677 x 285
[ 2240.810] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2240.810] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2240.810] (**) Power Button: Applying InputClass "system-keyboard"
[ 2240.810] (II) LoadModule: "libinput"
[ 2240.810] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 2240.811] (II) Module libinput: vendor="X.Org Foundation"
[ 2240.811] compiled for 1.20.8, module version = 0.30.0
[ 2240.811] Module class: X.Org XInput Driver
[ 2240.811] ABI class: X.Org XInput driver, version 24.1
[ 2240.811] (II) Using input driver 'libinput' for 'Power Button'
[ 2240.811] (**) Power Button: always reports core events
[ 2240.811] (**) Option "Device" "/dev/input/event1"
[ 2240.811] (**) Option "_source" "server/udev"
[ 2240.812] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 2240.812] (II) event1 - Power Button: device is a keyboard
[ 2240.812] (II) event1 - Power Button: device removed
[ 2240.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 2240.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2240.841] (**) Option "xkb_model" "pc105"
[ 2240.841] (**) Option "xkb_layout" "us"
[ 2240.842] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 2240.842] (II) event1 - Power Button: device is a keyboard
[ 2240.843] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 2240.843] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 2240.843] (**) Video Bus: Applying InputClass "system-keyboard"
[ 2240.843] (II) Using input driver 'libinput' for 'Video Bus'
[ 2240.843] (**) Video Bus: always reports core events
[ 2240.843] (**) Option "Device" "/dev/input/event2"
[ 2240.843] (**) Option "_source" "server/udev"
[ 2240.844] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 2240.844] (II) event2 - Video Bus: device is a keyboard
[ 2240.844] (II) event2 - Video Bus: device removed
[ 2240.876] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2/event2"
[ 2240.876] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2240.876] (**) Option "xkb_model" "pc105"
[ 2240.876] (**) Option "xkb_layout" "us"
[ 2240.877] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 2240.877] (II) event2 - Video Bus: device is a keyboard
[ 2240.878] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 2240.878] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2240.878] (**) Power Button: Applying InputClass "system-keyboard"
[ 2240.878] (II) Using input driver 'libinput' for 'Power Button'
[ 2240.878] (**) Power Button: always reports core events
[ 2240.878] (**) Option "Device" "/dev/input/event0"
[ 2240.878] (**) Option "_source" "server/udev"
[ 2240.878] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 2240.878] (II) event0 - Power Button: device is a keyboard
[ 2240.879] (II) event0 - Power Button: device removed
[ 2240.916] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 2240.916] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 2240.916] (**) Option "xkb_model" "pc105"
[ 2240.916] (**) Option "xkb_layout" "us"
[ 2240.917] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 2240.917] (II) event0 - Power Button: device is a keyboard
[ 2240.918] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 2240.918] (II) No input driver specified, ignoring this device.
[ 2240.918] (II) This device may have been added with another device file.
[ 2240.918] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 2240.918] (II) No input driver specified, ignoring this device.
[ 2240.918] (II) This device may have been added with another device file.
[ 2240.918] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 2240.918] (II) No input driver specified, ignoring this device.
[ 2240.918] (II) This device may have been added with another device file.
[ 2240.919] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 2240.919] (II) No input driver specified, ignoring this device.
[ 2240.919] (II) This device may have been added with another device file.
[ 2240.919] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event17)
[ 2240.919] (II) No input driver specified, ignoring this device.
[ 2240.919] (II) This device may have been added with another device file.
[ 2240.919] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event18)
[ 2240.919] (II) No input driver specified, ignoring this device.
[ 2240.919] (II) This device may have been added with another device file.
[ 2240.919] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/event8)
[ 2240.919] (**) Logitech G9 Laser Mouse: Applying InputClass "libinput pointer catchall"
[ 2240.919] (II) Using input driver 'libinput' for 'Logitech G9 Laser Mouse'
[ 2240.920] (**) Logitech G9 Laser Mouse: always reports core events
[ 2240.920] (**) Option "Device" "/dev/input/event8"
[ 2240.920] (**) Option "_source" "server/udev"
[ 2240.977] (II) event8 - Logitech G9 Laser Mouse: is tagged by udev as: Mouse
[ 2240.977] (II) event8 - Logitech G9 Laser Mouse: device set to 1600 DPI
[ 2240.977] (II) event8 - Logitech G9 Laser Mouse: device is a pointer
[ 2240.977] (II) event8 - Logitech G9 Laser Mouse: device removed
[ 2241.050] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:046D:C048.0005/input/input8/event8"
[ 2241.050] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse" (type: MOUSE, id 9)
[ 2241.050] (**) Option "AccelerationScheme" "none"
[ 2241.050] (**) Logitech G9 Laser Mouse: (accel) selected scheme none/0
[ 2241.050] (**) Logitech G9 Laser Mouse: (accel) acceleration factor: 2.000
[ 2241.050] (**) Logitech G9 Laser Mouse: (accel) acceleration threshold: 4
[ 2241.107] (II) event8 - Logitech G9 Laser Mouse: is tagged by udev as: Mouse
[ 2241.108] (II) event8 - Logitech G9 Laser Mouse: device set to 1600 DPI
/var/log/Xorg.0.log (part 2)
[ 2241.108] (II) event8 - Logitech G9 Laser Mouse: device is a pointer
[ 2241.108] (II) config/udev: Adding input device Logitech G9 Laser Mouse (/dev/input/mouse1)
[ 2241.108] (II) No input driver specified, ignoring this device.
[ 2241.108] (II) This device may have been added with another device file.
[ 2241.109] (II) config/udev: Adding input device Logitech G9 Laser Mouse Consumer Control (/dev/input/event10)
[ 2241.109] (**) Logitech G9 Laser Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2241.109] (**) Logitech G9 Laser Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 2241.109] (II) Using input driver 'libinput' for 'Logitech G9 Laser Mouse Consumer Control'
[ 2241.109] (**) Logitech G9 Laser Mouse Consumer Control: always reports core events
[ 2241.109] (**) Option "Device" "/dev/input/event10"
[ 2241.109] (**) Option "_source" "server/udev"
[ 2241.110] (II) event10 - Logitech G9 Laser Mouse Consumer Control: is tagged by udev as: Keyboard
[ 2241.110] (II) event10 - Logitech G9 Laser Mouse Consumer Control: device is a keyboard
[ 2241.110] (II) event10 - Logitech G9 Laser Mouse Consumer Control: device removed
[ 2241.143] (II) libinput: Logitech G9 Laser Mouse Consumer Control: needs a virtual subdevice
[ 2241.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C048.0006/input/input10/event10"
[ 2241.143] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse Consumer Control" (type: MOUSE, id 10)
[ 2241.143] (**) Option "AccelerationScheme" "none"
[ 2241.143] (**) Logitech G9 Laser Mouse Consumer Control: (accel) selected scheme none/0
[ 2241.143] (**) Logitech G9 Laser Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 2241.143] (**) Logitech G9 Laser Mouse Consumer Control: (accel) acceleration threshold: 4
[ 2241.144] (II) event10 - Logitech G9 Laser Mouse Consumer Control: is tagged by udev as: Keyboard
[ 2241.144] (II) event10 - Logitech G9 Laser Mouse Consumer Control: device is a keyboard
[ 2241.145] (II) config/udev: Adding input device Logitech G9 Laser Mouse Keyboard (/dev/input/event9)
[ 2241.145] (**) Logitech G9 Laser Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[ 2241.145] (**) Logitech G9 Laser Mouse Keyboard: Applying InputClass "system-keyboard"
[ 2241.145] (II) Using input driver 'libinput' for 'Logitech G9 Laser Mouse Keyboard'
[ 2241.145] (**) Logitech G9 Laser Mouse Keyboard: always reports core events
[ 2241.145] (**) Option "Device" "/dev/input/event9"
[ 2241.145] (**) Option "_source" "server/udev"
[ 2241.146] (II) event9 - Logitech G9 Laser Mouse Keyboard: is tagged by udev as: Keyboard
[ 2241.146] (II) event9 - Logitech G9 Laser Mouse Keyboard: device is a keyboard
[ 2241.147] (II) event9 - Logitech G9 Laser Mouse Keyboard: device removed
[ 2241.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C048.0006/input/input9/event9"
[ 2241.183] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse Keyboard" (type: KEYBOARD, id 11)
[ 2241.183] (**) Option "xkb_model" "pc105"
[ 2241.183] (**) Option "xkb_layout" "us"
[ 2241.185] (II) event9 - Logitech G9 Laser Mouse Keyboard: is tagged by udev as: Keyboard
[ 2241.185] (II) event9 - Logitech G9 Laser Mouse Keyboard: device is a keyboard
[ 2241.185] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ (/dev/input/event3)
[ 2241.185] (**) ErgoDox EZ ErgoDox EZ: Applying InputClass "libinput keyboard catchall"
[ 2241.185] (**) ErgoDox EZ ErgoDox EZ: Applying InputClass "system-keyboard"
[ 2241.185] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ'
[ 2241.185] (**) ErgoDox EZ ErgoDox EZ: always reports core events
[ 2241.185] (**) Option "Device" "/dev/input/event3"
[ 2241.185] (**) Option "_source" "server/udev"
[ 2241.186] (II) event3 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Keyboard
[ 2241.187] (II) event3 - ErgoDox EZ ErgoDox EZ: device is a keyboard
[ 2241.187] (II) event3 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.0/0003:FEED:1307.0001/input/input3/event3"
[ 2241.210] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ" (type: KEYBOARD, id 12)
[ 2241.210] (**) Option "xkb_model" "pc105"
[ 2241.210] (**) Option "xkb_layout" "us"
[ 2241.211] (II) event3 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Keyboard
[ 2241.211] (II) event3 - ErgoDox EZ ErgoDox EZ: device is a keyboard
[ 2241.212] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ (/dev/input/event4)
[ 2241.212] (**) ErgoDox EZ ErgoDox EZ: Applying InputClass "libinput pointer catchall"
[ 2241.212] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ'
[ 2241.212] (**) ErgoDox EZ ErgoDox EZ: always reports core events
[ 2241.212] (**) Option "Device" "/dev/input/event4"
[ 2241.212] (**) Option "_source" "server/udev"
[ 2241.267] (II) event4 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Mouse
[ 2241.267] (II) event4 - ErgoDox EZ ErgoDox EZ: device is a pointer
[ 2241.268] (II) event4 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.356] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.1/0003:FEED:1307.0002/input/input4/event4"
[ 2241.356] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ" (type: MOUSE, id 13)
[ 2241.356] (**) Option "AccelerationScheme" "none"
[ 2241.356] (**) ErgoDox EZ ErgoDox EZ: (accel) selected scheme none/0
[ 2241.356] (**) ErgoDox EZ ErgoDox EZ: (accel) acceleration factor: 2.000
[ 2241.356] (**) ErgoDox EZ ErgoDox EZ: (accel) acceleration threshold: 4
[ 2241.414] (II) event4 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Mouse
[ 2241.414] (II) event4 - ErgoDox EZ ErgoDox EZ: device is a pointer
[ 2241.415] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ (/dev/input/mouse0)
[ 2241.415] (II) No input driver specified, ignoring this device.
[ 2241.415] (II) This device may have been added with another device file.
[ 2241.415] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ System Control (/dev/input/event5)
[ 2241.415] (**) ErgoDox EZ ErgoDox EZ System Control: Applying InputClass "libinput keyboard catchall"
[ 2241.415] (**) ErgoDox EZ ErgoDox EZ System Control: Applying InputClass "system-keyboard"
[ 2241.415] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ System Control'
[ 2241.415] (**) ErgoDox EZ ErgoDox EZ System Control: always reports core events
[ 2241.415] (**) Option "Device" "/dev/input/event5"
[ 2241.415] (**) Option "_source" "server/udev"
[ 2241.417] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: is tagged by udev as: Keyboard
[ 2241.417] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: device is a keyboard
[ 2241.417] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: device removed
[ 2241.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.2/0003:FEED:1307.0003/input/input5/event5"
[ 2241.450] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ System Control" (type: KEYBOARD, id 14)
[ 2241.450] (**) Option "xkb_model" "pc105"
[ 2241.450] (**) Option "xkb_layout" "us"
[ 2241.451] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: is tagged by udev as: Keyboard
[ 2241.452] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: device is a keyboard
[ 2241.452] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ Consumer Control (/dev/input/event6)
[ 2241.452] (**) ErgoDox EZ ErgoDox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2241.452] (**) ErgoDox EZ ErgoDox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 2241.452] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ Consumer Control'
[ 2241.452] (**) ErgoDox EZ ErgoDox EZ Consumer Control: always reports core events
[ 2241.452] (**) Option "Device" "/dev/input/event6"
[ 2241.452] (**) Option "_source" "server/udev"
[ 2241.454] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: is tagged by udev as: Keyboard
[ 2241.454] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: device is a keyboard
[ 2241.454] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: device removed
[ 2241.503] (II) libinput: ErgoDox EZ ErgoDox EZ Consumer Control: needs a virtual subdevice
[ 2241.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.2/0003:FEED:1307.0003/input/input6/event6"
[ 2241.503] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ Consumer Control" (type: MOUSE, id 15)
[ 2241.503] (**) Option "AccelerationScheme" "none"
[ 2241.503] (**) ErgoDox EZ ErgoDox EZ Consumer Control: (accel) selected scheme none/0
[ 2241.503] (**) ErgoDox EZ ErgoDox EZ Consumer Control: (accel) acceleration factor: 2.000
[ 2241.503] (**) ErgoDox EZ ErgoDox EZ Consumer Control: (accel) acceleration threshold: 4
[ 2241.505] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: is tagged by udev as: Keyboard
[ 2241.505] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: device is a keyboard
[ 2241.505] (II) config/udev: Adding input device ErgoDox EZ ErgoDox EZ (/dev/input/event7)
[ 2241.505] (**) ErgoDox EZ ErgoDox EZ: Applying InputClass "libinput keyboard catchall"
[ 2241.505] (**) ErgoDox EZ ErgoDox EZ: Applying InputClass "system-keyboard"
[ 2241.505] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ'
[ 2241.505] (**) ErgoDox EZ ErgoDox EZ: always reports core events
[ 2241.505] (**) Option "Device" "/dev/input/event7"
[ 2241.505] (**) Option "_source" "server/udev"
[ 2241.507] (II) event7 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Keyboard
[ 2241.507] (II) event7 - ErgoDox EZ ErgoDox EZ: device is a keyboard
[ 2241.507] (II) event7 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.556] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.3/0003:FEED:1307.0004/input/input7/event7"
[ 2241.556] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ" (type: KEYBOARD, id 16)
[ 2241.556] (**) Option "xkb_model" "pc105"
[ 2241.556] (**) Option "xkb_layout" "us"
[ 2241.558] (II) event7 - ErgoDox EZ ErgoDox EZ: is tagged by udev as: Keyboard
[ 2241.558] (II) event7 - ErgoDox EZ ErgoDox EZ: device is a keyboard
[ 2241.559] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 2241.559] (II) No input driver specified, ignoring this device.
[ 2241.559] (II) This device may have been added with another device file.
[ 2241.559] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event12)
[ 2241.559] (II) No input driver specified, ignoring this device.
[ 2241.559] (II) This device may have been added with another device file.
[ 2241.559] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event19)
[ 2241.559] (II) No input driver specified, ignoring this device.
[ 2241.559] (II) This device may have been added with another device file.
[ 2241.559] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event20)
[ 2241.559] (II) No input driver specified, ignoring this device.
[ 2241.559] (II) This device may have been added with another device file.
[ 2241.560] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event21)
[ 2241.560] (II) No input driver specified, ignoring this device.
[ 2241.560] (II) This device may have been added with another device file.
[ 2241.560] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event22)
[ 2241.560] (II) No input driver specified, ignoring this device.
[ 2241.560] (II) This device may have been added with another device file.
[ 2241.560] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event24)
[ 2241.560] (II) No input driver specified, ignoring this device.
[ 2241.560] (II) This device may have been added with another device file.
[ 2241.560] (II) config/udev: Adding input device PC Speaker (/dev/input/event23)
[ 2241.561] (II) No input driver specified, ignoring this device.
[ 2241.561] (II) This device may have been added with another device file.
[ 2241.563] (**) Logitech G9 Laser Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2241.563] (**) Logitech G9 Laser Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 2241.564] (II) Using input driver 'libinput' for 'Logitech G9 Laser Mouse Consumer Control'
[ 2241.564] (**) Logitech G9 Laser Mouse Consumer Control: always reports core events
[ 2241.564] (**) Option "Device" "/dev/input/event10"
[ 2241.564] (**) Option "_source" "_driver/libinput"
[ 2241.564] (II) libinput: Logitech G9 Laser Mouse Consumer Control: is a virtual subdevice
[ 2241.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C048.0006/input/input10/event10"
[ 2241.564] (II) XINPUT: Adding extended input device "Logitech G9 Laser Mouse Consumer Control" (type: KEYBOARD, id 17)
[ 2241.564] (**) Option "xkb_model" "pc105"
[ 2241.564] (**) Option "xkb_layout" "us"
[ 2241.564] (**) ErgoDox EZ ErgoDox EZ Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 2241.564] (**) ErgoDox EZ ErgoDox EZ Consumer Control: Applying InputClass "system-keyboard"
[ 2241.564] (II) Using input driver 'libinput' for 'ErgoDox EZ ErgoDox EZ Consumer Control'
[ 2241.564] (**) ErgoDox EZ ErgoDox EZ Consumer Control: always reports core events
[ 2241.564] (**) Option "Device" "/dev/input/event6"
[ 2241.564] (**) Option "_source" "_driver/libinput"
[ 2241.564] (II) libinput: ErgoDox EZ ErgoDox EZ Consumer Control: is a virtual subdevice
[ 2241.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-7/1-7:1.2/0003:FEED:1307.0003/input/input6/event6"
[ 2241.564] (II) XINPUT: Adding extended input device "ErgoDox EZ ErgoDox EZ Consumer Control" (type: KEYBOARD, id 18)
[ 2241.564] (**) Option "xkb_model" "pc105"
[ 2241.564] (**) Option "xkb_layout" "us"
[ 2241.576] (II) event1 - Power Button: device removed
[ 2241.623] (II) event2 - Video Bus: device removed
[ 2241.649] (II) event0 - Power Button: device removed
[ 2241.690] (II) event8 - Logitech G9 Laser Mouse: device removed
[ 2241.754] (II) event9 - Logitech G9 Laser Mouse Keyboard: device removed
[ 2241.783] (II) event3 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.823] (II) event4 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.890] (II) event5 - ErgoDox EZ ErgoDox EZ System Control: device removed
[ 2241.930] (II) event7 - ErgoDox EZ ErgoDox EZ: device removed
[ 2241.969] (II) event10 - Logitech G9 Laser Mouse Consumer Control: device removed
[ 2242.009] (II) event6 - ErgoDox EZ ErgoDox EZ Consumer Control: device removed
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.037] (II) UnloadModule: "libinput"
[ 2242.038] (II) UnloadModule: "libinput"
[ 2242.102] (II) Server terminated successfully (0). Closing log file.
I do not have the machine in front of me at the moment, but I did save the logs.
Here is the last rc.log entry. If this doesn't help, I will get the status as soon as I'm able.
rc default logging started at Sat Jun 13 09:37:59 2020
* Starting NetworkManager ...
[ ok ]
Connecting... 1sConnecting.... 1sConnecting..... 1sConnecting...... 1sConnecting....... 1sConnecting........ 1sConnecting......... 1sConnecting.......... 1sConnecting........... 1sConnecting............ 1sConnecting............. 1sConnecting.............. 1sConnecting............... 1sConnecting............... 0s [offline]
* Marking NetworkManager as inactive. It will automatically be marked
* as started after a network connection has been established.
* WARNING: NetworkManager has started, but is inactive
* Starting haveged ...
haveged: command socket is listening at fd 3
[ ok ]
* Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ...
[ ok ]
* Starting syslog-ng ...
[ ok ]
* Starting acpid ...
[ ok ]
* Starting rpcbind ...
[ ok ]
* Starting automounter ...
[ ok ]
* Starting cronie ...
[ ok ]
* Starting avahi-daemon ...
[ ok ]
* Starting cupsd ...
[ ok ]
* Starting ntpd ...
[ ok ]
* Starting virtlogd ...
[ ok ]
* WARNING: libvirtd will start when NetworkManager has started
* WARNING: netmount will start when NetworkManager has started
* Setting up tmpfiles.d entries ...
chattr: Operation not supported while setting flags on /var/lib/postgres/data
[ !! ]
* ERROR: opentmpfiles-setup failed to start
* Setting up sddm ...
[ ok ]
* Starting local ...
[ ok ]
rc default logging stopped at Sat Jun 13 09:38:02 2020
rc shutdown logging started at Sat Jun 13 17:09:37 2020
* Stopping local ...
[ ok ]
* Stopping sddm ...
* start-stop-daemon: 1 process refused to stop
* Error stopping sddm
[ !! ]
* ERROR: xdm failed to stop
* Saving random seed ...
[ ok ]
* Stopping openrc-settingsd ...
[ ok ]
* Unmounting network filesystems ...
[ ok ]
* Stopping libvirtd ...
[ ok ]
* Stopping virtlogd ...
[ ok ]
* Stopping ntpd ...
[ ok ]
* Stopping cupsd ...
[ ok ]
* Stopping cronie ...
[ ok ]
* Stopping avahi-daemon ...
[ ok ]
* Stopping automounter ...
[ ok ]
* Stopping rpcbind ...
[ ok ]
* Stopping acpid ...
[ ok ]
* Stopping syslog-ng ...
[ ok ]
* Stopping haveged ...
[ ok ]
* Stopping NetworkManager ...
[ ok ]
* Stopping elogind ...
[ ok ]
* Stopping dbus ...
[ ok ]
* Unmounting loop devices
* Unmounting filesystems
* Unmounting /home ...
[ ok ]
* Unmounting /opt/GOG_Games ...
[ ok ]
* Unmounting /opt/Steam_Library ...
[ ok ]
* Unmounting /opt/Wine ...
[ ok ]
* Unmounting /boot/efi ...
[ ok ]
* Deactivating swap devices ...
[ ok ]
* Setting hardware clock using the system clock [UTC] ...
[ ok ]
* Stopping udev ...
[ ok ]
rc shutdown logging stopped at Sat Jun 13 17:10:22 2020
you need fix first this:
ERROR: opentmpfiles-setup failed to start
you start sddm and xdm ? both thogether? you need start sddm OR xdm (here you must select sddm for starting)... so only one service which starting manager is enough :-) (minor problem).
I see no problem with your xorg server, seems it start poprerly...so problem will be in sddm/(xdm) and opentmpfiles-setup (sddm need working opentmpfiles)
same problem with opentmpfiles has another user: https://forum.artixlinux.org/index.php/topic,1321.msg9290.html#msg9290
comment this line in /etc/tmpfiles.d/postgresql.conf
# h /var/lib/postgres/data - - - - +C
i prepared merge request for fix it in our repo.
This fix has been merged and will be available once mirrors sync, thanks for the report and sorry for issue.
can you please test if sddm starts up now without any problems? (if opentmpfiles-setup boots properly)
I think the only way to start sddm w/openrc is to have xdm do the startup.
That's how my Plasma/openrc functions.
The file etc/conf.d/xdm must have the line:
DISPLAYMANAGER="sddm"
Best regards.
you're right, sddm-openrc was removed from artix before 2 weeks, did not works.
@InkStone, remove sddm-openrc, set xdm, fix postgresql (see above) and try if start xdm
Hello everyone,
My apologies for the delayed reply.
The good news is that sddm and my desktop (lxqt) appear to be working again!
Thank you so much for patching the problem!
The bad(?) news is that it appeared to be working after an update about two days ago, then briefly stopped working again following an update, then started working again after an update sometime last night.
If that is of interest, i can post logs pacman, etc. I'll keep this thread unsolved for just a bit longer in case it stops working again.
The ugly news is that I'm encountering two other issues that cropped up around the same time as the sddm issue.
- During shutdown udev takes a while to shut down and eventually has to timeout and gives up on workers to finish (i have not plugged anything new into my machine).
- Additionally, kvm hangs the shut down while exiting hardware virtualization.
If these are worth chasing in this thread, i can provide information.
If not, I will do my best to look into them (and check already reported bugs) before making a new post.
Thank you to everyone providing this distro. I've only had two instances of breakage like this since i came over from the manjaro openrc dist. Very happy with the distribution, especially given the rolling nature of the updates.
This seems to be an Lxqt issue...I have not had any such issues using Plasma w/openrc. My hardware is a 10+ year old Dell Inspiron 1525 (but, I am not so patiently awaiting the arrival of a new Star LabTop MK IV https://starlabs.systems/pages/labtop-mk-iv ;D )
I hope you can get this issue sorted.
Best regards.
So it's happened again.
I've used the machine to do OS and game updates (Steam and one Lutris game), as well as browse Firefox.
The only new error I've noticed was in another thread (https://forum.artixlinux.org/index.php/topic,1536.msg10546.html), about the lxqt sddm theme having an issue.
The question is:- Should I bother troubleshooting hoping to solve the issue and maybe stumble onto some bug or problem that will help the distro (maybe).
- Or accept that sometimes a cause is lost and start fresh.
I'm fine starting fresh, but I can't offer this group much in the way of technical assistance, so I'm willing to delve into a problem if it helps.
And now it's back.
I've done nothing to the machine other than run my Ubuntu copy for firefox....
This is .... obnoxious.
I'm going to bite the bullet and replace the OS when time allows.
I'll have a copy of the problematic OS while I transition in case someone has an idea they want to check.
Thanks to everyone that took a look.
The broken sddm theme from 2 days ago was my fault; other than that, I'd advise against re-installing the whole system. If nothing else, we'll never know what caused the problem in the first place. ;)
I can keep it going to diagnostic purposes - I'm just not technically skilled enough yet to figure it out quickly and my time is pinched to do the normal "learn, apply, repeat" method.
And while they all might be related, it looks like I have a udev, kvm, and sddm issue that no one else has reported or chimed in on - so very possible I (or some random package) had some unintended effect on my system and I feel like i would be wasting everyone's time.
What I'm getting at is, I'll keep it if it might help the distro and keep working on this puzzle with those that are interested.
But I may still install a second copy and also practice better backup/restore habits.
And no problem there. Just to be clear.
Hiccups happen.
Regarding the udev issue.
There is a snippet of messages that pop up at boot that never happened before. I've barely been able to capture a screen shot with my phone. If i can find the log, I'd post it here.
The message is many lines long. Happens right before "* Setting up tmpfiles.d entries ..."
And the last line of the message is
udevd[911]: worker [950] failed while handling '/devices/pci0000"00/000 ...
there is more after the ... , i just didn't capture it.
Any clues where this log might be.
Regarding the original issue of being thrown to tty1 instead of sddm.
A reboot, and things worked Another reboot, and I'm back to the above.
would kvm or udev cause a hang or race condition for sddm which would explain the temperamental nature of this problem?
edit: clarity
If you suspect there is a race condition, try disabling parallel start in openrc. Well, I'm assuming you are using otherwise it shouldn't be possible for openrc to have a race in its handling of services.
Not sure if it would be in openrc /var/log/rc.log. You may need to turn on openrc logging, in /etc/rc.conf:
rc_logger="YES"
You may also want to set verbose logging on :
rc_verbose=YES
And openrc has an interaactive option:
rc_interactive="YES"
The only place "udevd" appears in any of my logs is dmesg; showing that its starting up along with entries on urandom.
parallel is set to no (actually commented out, so default).
So I guess that isn't it. Bothersome that it may or may not work seemingly randomly (so far)
I captured the dmesg from the last boot after enabling verbose and interactive (didn't use that, just enabled for later)
The new entries I noticed during boot start at this line:
[ 6.472829] RIP: 0033:0x7fb2edf0c73e
There is more to the log, I just hit the 40k characters limit.
[ 5.578234] [TTM] Initializing DMA pool allocator
[ 5.578268] [drm] amdgpu: 8176M of VRAM memory ready
[ 5.578270] [drm] amdgpu: 8176M of GTT memory ready.
[ 5.578272] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.578496] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000).
[ 5.583371] [drm] use_doorbell being set to: [true]
[ 5.583960] [drm] use_doorbell being set to: [true]
[ 5.584051] amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
[ 5.586084] [drm] Found UVD firmware Version: 66.43 Family ID: 17
[ 5.586090] [drm] PSP loading UVD firmware
[ 5.587716] [drm] Found VCE firmware Version: 57.6 Binary ID: 4
[ 5.587752] [drm] PSP loading VCE firmware
[ 5.755009] kvm: Nested Virtualization enabled
[ 5.755020] SVM: kvm: Nested Paging enabled
[ 5.755021] SVM: Virtual VMLOAD VMSAVE supported
[ 5.755021] SVM: Virtual GIF supported
[ 5.758272] MCE: In-kernel MCE decoding enabled.
[ 5.759775] ppdev: user-space parallel port driver
[ 5.761006] EDAC amd64: F17h_M10h detected (node 0).
[ 5.761081] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.776960] [drm] reserve 0x400000 from 0xf5fe800000 for PSP TMR
[ 5.826283] r8169 0000:1b:00.0 enp27s0: renamed from eth0
[ 5.827091] EDAC amd64: F17h_M10h detected (node 0).
[ 5.827174] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.903719] EDAC amd64: F17h_M10h detected (node 0).
[ 5.903849] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.935166] [drm] kiq ring mec 2 pipe 1 q 0
[ 5.946902] [drm] Display Core initialized with v3.2.76!
[ 5.960109] Adding 8388604k swap on /dev/mapper/lonestar_LVM-LVM_SWAP. Priority:-2 extents:1 across:8388604k SSFS
[ 5.966978] snd_hda_intel 0000:12:00.1: bound 0000:12:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 6.001929] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.003974] EDAC amd64: F17h_M10h detected (node 0).
[ 6.004062] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.023302] [drm] UVD and UVD ENC initialized successfully.
[ 6.054120] EDAC amd64: F17h_M10h detected (node 0).
[ 6.054216] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.058447] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: discard
[ 6.061651] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: discard
[ 6.063798] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[ 6.065580] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard
[ 6.117187] EDAC amd64: F17h_M10h detected (node 0).
[ 6.117267] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.123987] [drm] VCE initialized successfully.
[ 6.125205] kfd kfd: Allocated 3969056 bytes on gart
[ 6.125802] Virtual CRAT table created for GPU
[ 6.125803] Parsing CRAT table with 1 nodes
[ 6.125812] Creating topology SYSFS entries
[ 6.125961] Topology: Add dGPU node [0x687f:0x1002]
[ 6.125964] kfd kfd: added device 1002:687f
[ 6.127280] [drm] fb mappable at 0xE0CEE000
[ 6.127281] [drm] vram apper at 0xE0000000
[ 6.127281] [drm] size 11059200
[ 6.127282] [drm] fb depth is 24
[ 6.127282] [drm] pitch is 10240
[ 6.127365] fbcon: amdgpudrmfb (fb0) is primary device
[ 6.151737] Console: switching to colour frame buffer device 320x67
[ 6.172410] amdgpu 0000:12:00.0: fb0: amdgpudrmfb frame buffer device
[ 6.196647] EDAC amd64: F17h_M10h detected (node 0).
[ 6.196757] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.213439] amdgpu 0000:12:00.0: ring gfx uses VM inv eng 0 on hub 0
[ 6.213441] amdgpu 0000:12:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 6.213443] amdgpu 0000:12:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 6.213444] amdgpu 0000:12:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 6.213445] amdgpu 0000:12:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 6.213447] amdgpu 0000:12:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 6.213448] amdgpu 0000:12:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 6.213449] amdgpu 0000:12:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 6.213450] amdgpu 0000:12:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 6.213451] amdgpu 0000:12:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 6.213452] amdgpu 0000:12:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[ 6.213453] amdgpu 0000:12:00.0: ring page0 uses VM inv eng 1 on hub 1
[ 6.213454] amdgpu 0000:12:00.0: ring sdma1 uses VM inv eng 4 on hub 1
[ 6.213455] amdgpu 0000:12:00.0: ring page1 uses VM inv eng 5 on hub 1
[ 6.213456] amdgpu 0000:12:00.0: ring uvd_0 uses VM inv eng 6 on hub 1
[ 6.213457] amdgpu 0000:12:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1
[ 6.213458] amdgpu 0000:12:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1
[ 6.213460] amdgpu 0000:12:00.0: ring vce0 uses VM inv eng 9 on hub 1
[ 6.213461] amdgpu 0000:12:00.0: ring vce1 uses VM inv eng 10 on hub 1
[ 6.213462] amdgpu 0000:12:00.0: ring vce2 uses VM inv eng 11 on hub 1
[ 6.213463] [drm] ECC is not present.
[ 6.213466] [drm] SRAM ECC is not present.
[ 6.214782] [drm] Initialized amdgpu 3.37.0 20150101 for 0000:12:00.0 on minor 0
[ 6.214964] amdgpu 0000:38:00.0: enabling device (0000 -> 0003)
[ 6.215067] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1462:0x7A38 0xC6).
[ 6.215087] [drm] register mmio base: 0xFE400000
[ 6.215088] [drm] register mmio size: 524288
[ 6.215107] [drm] add ip block number 0 <soc15_common>
[ 6.215108] [drm] add ip block number 1 <gmc_v9_0>
[ 6.215109] [drm] add ip block number 2 <vega10_ih>
[ 6.215110] [drm] add ip block number 3 <psp>
[ 6.215111] [drm] add ip block number 4 <gfx_v9_0>
[ 6.215112] [drm] add ip block number 5 <sdma_v4_0>
[ 6.215113] [drm] add ip block number 6 <powerplay>
[ 6.215114] [drm] add ip block number 7 <dm>
[ 6.215115] [drm] add ip block number 8 <vcn_v1_0>
[ 6.226499] [drm] BIOS signature incorrect ff ff
[ 6.226505] amdgpu 0000:38:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
[ 6.231037] [drm] BIOS signature incorrect ff ff
[ 6.232475] ATOM BIOS: 113-RAVEN-107
[ 6.233137] [drm] VCN decode is enabled in VM mode
[ 6.233137] [drm] VCN encode is enabled in VM mode
[ 6.233138] [drm] JPEG decode is enabled in VM mode
[ 6.233156] [drm] GPU posting now...
[ 6.233416] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 6.233422] amdgpu 0000:38:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 6.233424] amdgpu 0000:38:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 6.233426] amdgpu 0000:38:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 6.233430] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 6.233430] [drm] RAM width 128bits DDR4
[ 6.233452] [drm] amdgpu: 2048M of VRAM memory ready
[ 6.233454] [drm] amdgpu: 3072M of GTT memory ready.
[ 6.233456] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 6.233581] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 6.241062] [drm] use_doorbell being set to: [true]
[ 6.241121] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[ 6.242314] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[ 6.242321] [drm] PSP loading VCN firmware
[ 6.260186] EDAC amd64: F17h_M10h detected (node 0).
[ 6.260262] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.263393] [drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
[ 6.303406] elogind-daemon[1604]: Watching system buttons on /dev/input/event1 (Power Button)
[ 6.360247] elogind-daemon[1604]: Watching system buttons on /dev/input/event0 (Power Button)
[ 6.440029] amdgpu 0000:38:00.0: RAS: optional ras ta ucode is not available
[ 6.461645] [drm] kiq ring mec 2 pipe 1 q 0
[ 6.461994] [drm] DM_PPLIB: values for F clock
[ 6.461995] [drm] DM_PPLIB: 1600000 in kHz, 4399 in mV
[ 6.461996] [drm] DM_PPLIB: values for DCF clock
[ 6.461997] [drm] DM_PPLIB: 300000 in kHz, 3649 in mV
[ 6.461997] [drm] DM_PPLIB: 600000 in kHz, 4074 in mV
[ 6.461997] [drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[ 6.461998] [drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[ 6.462156] [drm] Unsupported Connector type:21!
[ 6.462161] [drm] Unsupported Connector type:21!
[ 6.462165] [drm] Unsupported Connector type:21!
[ 6.462170] [drm] Unsupported Connector type:21!
[ 6.462171] [drm] Display Core initialized with v3.2.76!
[ 6.462529] BUG: kernel NULL pointer dereference, address: 0000000000000f28
[ 6.462557] #PF: supervisor write access in kernel mode
[ 6.462574] #PF: error_code(0x0002) - not-present page
[ 6.462589] PGD 0 P4D 0
[ 6.462600] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 6.462615] CPU: 2 PID: 958 Comm: udevd Not tainted 5.7.6-artix1-1 #1
[ 6.462634] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B350M BAZOOKA (MS-7A38), BIOS 1.J0 01/21/2019
[ 6.462760] RIP: 0010:hdcp_create_workqueue+0x67/0x2f0 [amdgpu]
[ 6.462778] Code: 48 89 c7 e8 ab e6 d7 e2 49 89 c4 48 85 c0 0f 84 8d 02 00 00 48 8b 3d 10 4f cf e3 ba 00 14 00 00 be c0 0d 00 00 e8 79 ed d7 e2 <49> 89 84 24 18 0f 00 00 48 85 c0 0f 84 44 02 00 00 48 8b 3d e9 4e
[ 6.462830] RSP: 0018:ffffa3f801d87860 EFLAGS: 00010286
[ 6.462847] RAX: ffff953cdcafe000 RBX: ffff953cdca60000 RCX: 0000000000000000
[ 6.462868] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff953cdcb00000
[ 6.462889] RBP: 0000000000000000 R08: ffff953cdcafe000 R09: ffff953cdcafe000
[ 6.462910] R10: 00d0afdc3c95ffff R11: 0000000000000006 R12: 0000000000000010
[ 6.462931] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000007
[ 6.462952] FS: 00007fb2edac1bc0(0000) GS:ffff953cf0e80000(0000) knlGS:0000000000000000
[ 6.462976] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.462993] CR2: 0000000000000f28 CR3: 000000042d3de000 CR4: 00000000003406e0
[ 6.463014] Call Trace:
[ 6.463115] amdgpu_dm_init.isra.0.cold+0xa0/0x1057 [amdgpu]
[ 6.463311] dm_hw_init+0xe/0x20 [amdgpu]
[ 6.463507] amdgpu_device_init.cold+0x1531/0x195b [amdgpu]
[ 6.463675] amdgpu_driver_load_kms+0x5c/0x200 [amdgpu]
[ 6.463838] amdgpu_pci_probe+0xf4/0x180 [amdgpu]
[ 6.463871] local_pci_probe+0x42/0x80
[ 6.466104] ? pci_match_device+0xd7/0x100
[ 6.468323] pci_device_probe+0xfa/0x1b0
[ 6.470549] really_probe+0x167/0x410
[ 6.472777] driver_probe_device+0xb6/0x100
[ 6.472780] device_driver_attach+0xa1/0xb0
[ 6.472783] __driver_attach+0x8a/0x150
[ 6.472786] ? device_driver_attach+0xb0/0xb0
[ 6.472788] ? device_driver_attach+0xb0/0xb0
[ 6.472791] bus_for_each_dev+0x89/0xd0
[ 6.472794] bus_add_driver+0x12b/0x1e0
[ 6.472797] driver_register+0x8b/0xe0
[ 6.472799] ? 0xffffffffc0f05000
[ 6.472803] do_one_initcall+0x59/0x240
[ 6.472808] do_init_module+0x5c/0x260
[ 6.472811] load_module+0x2137/0x23a0
[ 6.472818] __do_sys_init_module+0x172/0x1a0
[ 6.472824] do_syscall_64+0x49/0x90
[ 6.472827] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 6.472829] RIP: 0033:0x7fb2edf0c73e
[ 6.472832] Code: 48 8b 0d 55 f7 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 22 f7 0b 00 f7 d8 64 89 01 48
[ 6.472834] RSP: 002b:00007ffeb453d608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 6.472836] RAX: ffffffffffffffda RBX: 000055c6b5cb20e0 RCX: 00007fb2edf0c73e
[ 6.472836] RDX: 00007fb2edfe697d RSI: 00000000009e8461 RDI: 00007fb2ebe3b010
[ 6.472837] RBP: 00007fb2ebe3b010 R08: 000055c6b5cc2b10 R09: 00000000009e8470
[ 6.472838] R10: 0000000000000007 R11: 0000000000000246 R12: 00007fb2edfe697d
[ 6.472839] R13: 00007ffeb453d780 R14: 000055c6b5cb5110 R15: 000055c6b5cb20e0
[ 6.472842] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ppdev edac_mce_amd kvm_amd wmi_bmof kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd amdgpu(+) glue_helper pcspkr r8169 ccp k10temp sp5100_tco realtek i2c_piix4 rng_core libphy snd_hda_codec_realtek gpu_sched input_leds snd_hda_codec_generic i2c_algo_bit ledtrig_audio ttm snd_hda_codec_hdmi joydev drm_kms_helper snd_hda_intel snd_intel_dspcfg cec snd_hda_codec rc_core drm snd_hda_core snd_hwdep snd_pcm snd_timer agpgart snd syscopyarea sysfillrect sysimgblt mousedev fb_sys_fops soundcore sg parport_pc evdev crypto_user parport mac_hid pinctrl_amd gpio_amdpt wmi acpi_cpufreq ext4 crc32c_generic crc16 mbcache jbd2 hid_generic usbhid hid uas usb_storage dm_mod xhci_pci crc32c_intel xhci_hcd
[ 6.472878] CR2: 0000000000000f28
[ 6.472880] ---[ end trace 026b364343728c26 ]---
[ 6.473058] RIP: 0010:hdcp_create_workqueue+0x67/0x2f0 [amdgpu]
[ 6.473062] Code: 48 89 c7 e8 ab e6 d7 e2 49 89 c4 48 85 c0 0f 84 8d 02 00 00 48 8b 3d 10 4f cf e3 ba 00 14 00 00 be c0 0d 00 00 e8 79 ed d7 e2 <49> 89 84 24 18 0f 00 00 48 85 c0 0f 84 44 02 00 00 48 8b 3d e9 4e
[ 6.547346] RSP: 0018:ffffa3f801d87860 EFLAGS: 00010286
[ 6.547348] RAX: ffff953cdcafe000 RBX: ffff953cdca60000 RCX: 0000000000000000
[ 6.547350] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff953cdcb00000
[ 6.547351] RBP: 0000000000000000 R08: ffff953cdcafe000 R09: ffff953cdcafe000
[ 6.547352] R10: 00d0afdc3c95ffff R11: 0000000000000006 R12: 0000000000000010
[ 6.547353] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000007
[ 6.547355] FS: 00007fb2edac1bc0(0000) GS:ffff953cf0e80000(0000) knlGS:0000000000000000
[ 6.547356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.547358] CR2: 0000000000000f28 CR3: 000000042d3de000 CR4: 00000000003406e0
[ 6.549594] udevd[916]: worker [958] terminated by signal 9 (Killed)
[ 6.566940] udevd[916]: worker [958] failed while handling '/devices/pci0000:00/0000:00:01.1/0000:10:00.0/0000:11:00.0/0000:12:00.0'
[ 6.830413] elogind-daemon[1604]: Watching system buttons on /dev/input/event10 (Logitech G9 Laser Mouse Consumer Control)
[ 6.833544] elogind-daemon[1604]: Watching system buttons on /dev/input/event9 (Logitech G9 Laser Mouse Keyboard)
[ 6.836583] elogind-daemon[1604]: Watching system buttons on /dev/input/event3 (ErgoDox EZ ErgoDox EZ)
[ 6.839615] elogind-daemon[1604]: Watching system buttons on /dev/input/event5 (ErgoDox EZ ErgoDox EZ System Control)
[ 6.841878] elogind-daemon[1604]: Watching system buttons on /dev/input/event6 (ErgoDox EZ ErgoDox EZ Consumer Control)
[ 6.844073] elogind-daemon[1604]: Watching system buttons on /dev/input/event7 (ErgoDox EZ ErgoDox EZ)
[ 7.216835] elogind-daemon[1604]: New seat seat0.
[ 7.783405] Generic FE-GE Realtek PHY r8169-1b00:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-1b00:00, irq=IGNORE)
[ 7.864535] r8169 0000:1b:00.0 enp27s0: Link is Down
[ 8.954771] random: crng init done
[ 8.955874] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.611720] amdgpu 0000:12:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.611726] amdgpu 0000:38:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 10.855468] r8169 0000:1b:00.0 enp27s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.855481] IPv6: ADDRCONF(NETDEV_CHANGE): enp27s0: link becomes ready
[ 11.769132] elogind-daemon[1604]: New session c1 of user sddm.
[ 16.448979] elogind-daemon[1604]: New session 1 of user lonestar.
[ 16.482613] elogind-daemon[1604]: Removed session c1.
[ 16.946161] fuse: init (API version 7.31)
[ 20.505727] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
I'll only add that I rebooted about 4 times, and about half of them got me to sddm and a graphical interface.
Hey dude, don't be surprised, that your system not works, your kernel crash.
I see, you have ryzen procesor? What for procesor you have?
Which kernel parameters you use in boot? Put here compete dmesg.
Your problem have nothing to do with openrc, but with your hw (gpu) and kernel.
What for libdrm, mesa, kernel use you?
Don't worry, not surprised given how weird this machine is acting. :)
Short answer is a Ryzen 5 2400G APU.
Added the results of hwinfo --short to the opening post if it helps.
Added the dmesg and sysctl -a as attachments to this post.
Weird observation: I have a backup of this Artix on a flash drive during this issue and it never shows the kernel crash I noticed (even though it doesn't always boot into the graphical sddm either). Ubuntu has never shown this error and has never had trouble reaching login.
Results from pacman -Qq
lib32-libdrm 2.4.100-1
libdrm 2.4.102-1
lib32-mesa 19.3.4-3
lib32-mesa-vdpau 19.3.4-3
libva-mesa-driver 20.1.2-1
mesa 20.1.2-1
mesa-demos 8.4.0-2
mesa-vdpau 20.1.2-1
archlinux-appstream-data 20200612-1
archlinux-keyring 20200622-1
archlinux-mirrorlist 20200411-1
lib32-util-linux 2.35.1-1
libutil-linux 2.35.2-1
linux 5.7.6.artix1-1
linux-api-headers 5.6.11-1
linux-firmware 20200519.8ba6fa6-1
linux-headers 5.7.6.artix1-1
Consider updating your motherboard, it might help
https://www.msi.com/Motherboard/support/B350M-BAZOOKA
https://www.msi.com/blog/amd-combo-pi-1004-bios-update
(I have Ryzen 5 3400G APU with combo pi 1.0.0.4)
And I see no microcode update 🤔
Are you using the amd-ucode (microcode update)?
https://wiki.archlinux.org/index.php/Microcode#Configuration
the amd-ucode does exist.
I can try the update to the motherboard.
I'm running the latest stable update which was working fine for over a year.
Is it likely that updates to software/kernel/etc would trigger a need for a bios update?
Will report back on the bios update in a bit.
Progress!
Attached is the dmesg after the update (OS was already up to date)
Changes:
- Didn't see the error at boot.
- Don't see the error in dmesg
- shutdown doesn't pause at udev then stop a worker
- kvm exit doesn't hang on shutdown
- Suspend appears to work again (didn't report that before)/color]
Only two oddities are
- [ 0.347623] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
- [ 5.126973] sp5100-tco sp5100-tco: Watchdog hardware is disabled
Maybe these aren't big deals, just alerts.
I have no idea what Watchdog is and will look up later.Got the gist of what watchdog does and isn't needed on a desktop typically.
Still not sure about the conflicting IOMMU thing (Unable to read/write) then proceeds to add iommu groups two lines later.
I'm going to give it a day or two reboots JUST to make sure because I'm skittish now :)
I'm hopeful though, and I apologize it was a BIOS update that was the culprit (Feels a little like I just found out the computer wasn't plugged in or something simple like that).
Thank you to everyone, but especially alium for your help.
good to hear!!
not necessary - should not directly require. MSI just fixed with combo 1.0.0.4 (this prepare AMD self, what is reason, why is this update important) a lots bugs in BIOS and added some optimalisation 8)
your dmesg report just looked like something wasn't working perfectly in the HW (and linux has the ability to write what exactly, unlike Windows "an error has occurred")
i have same warnings, but i think is nothing important...
I don't use Watchdog too, but it can be turned on somewhere
Summarizing the thread now that it's solved.
Updated machine. Turns out a BIOS update was needed even though it was in Beta. Artix community now knows how little I know about this OS ;)
Thanks everyone.