Artix Linux Forum

Artix Linux => Installation / Migration / Configuration => Topic started by: p57 on 20 June 2020, 03:46:50

Title: Weekly ISOs install won't start
Post by: p57 on 20 June 2020, 03:46:50
Hello everyone,
I have been using Plasma edition fow couple of weeks now and I am happy with it. Everything works so far, no issues. No systemd and no pulseaudio (I can uninstall it without affecting any dependencies, I hope it stays like that).
I wanted to try s6 init as I have read lot about it and never had chance to try. Unfortunately weekly ISOs have issue, installer does not run. Tried Plasma and XFCE, OpenRc and s6, none of them can start installer.

Is this a known issue and if so, is there a way to fix?

Thanks.
Title: Re: Weekly ISOs install won't start
Post by: conky60 on 20 June 2020, 04:04:48
You could download the community Artix-Plasma-s6 edition here:

https://mirrors.dotsrc.org/artix-linux/iso/

These are tested versions whereas the weekly builds are not tested and therefore sometimes may not  work properly.

Best regards.
Title: Re: Weekly ISOs install won't start
Post by: p57 on 20 June 2020, 04:12:57
Thank you.
Unfortunately those older images can't even boot on my laptop, laptop just shuts off. And this was not just with Artix.

I hope issue is fixed in next weekly


You could download the community Artix-Plasma-s6 edition here:

https://mirrors.dotsrc.org/artix-linux/iso/

These are tested versions whereas the weekly builds are not tested and therefore sometimes may not  work properly.

Best regards.
Title: Re: Weekly ISOs install won't start
Post by: conky60 on 20 June 2020, 04:26:33
Quote
Thank you.
Unfortunately those older images can't even boot on my laptop, laptop just shuts off. And this was not just with Artix.

I hope issue is fixed in next weekly
Yes, well hopefully that will work out for you. :-)

I sometimes test the weekly builds, but only the plasma openrc versions as that is what I am familiar with.

Best regards.
Title: Re: Weekly ISOs install won't start
Post by: nous on 20 June 2020, 12:55:25
Tried Plasma and XFCE, OpenRc and s6, none of them can start installer.

Is this a known issue and if so, is there a way to fix?
Probably some dependency of calamares got updated and it needs to be rebuilt. Could you run it in a terminal and post the error here?
Code: [Select]
$ sudo calamares -d
Title: Re: Weekly ISOs install won't start
Post by: p57 on 20 June 2020, 18:32:29
Probably some dependency of calamares got updated and it needs to be rebuilt. Could you run it in a terminal and post the error here?
Code: [Select]
$ sudo calamares -d
Hi, thank you
Here is the output

Code: [Select]
 artix:[artix]:~$ sudo calamares -d
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'

(calamares:1964): Gtk-WARNING **: 16:26:05.445: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.445: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.445: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.445: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.446: Unable to locate theme engine in module_path: "adwaita",

(calamares:1964): Gtk-WARNING **: 16:26:05.446: Unable to locate theme engine in module_path: "adwaita",

(calamares:1964): Gtk-WARNING **: 16:26:05.447: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.447: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.448: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.449: Unable to locate theme engine in module_path: "adwaita",

(calamares:1964): Gtk-WARNING **: 16:26:05.449: Unable to locate theme engine in module_path: "adwaita",

(calamares:1964): Gtk-WARNING **: 16:26:05.451: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.451: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.451: Unable to locate theme engine in module_path: "murrine",

(calamares:1964): Gtk-WARNING **: 16:26:05.451: Unable to locate theme engine in module_path: "murrine",
16:26:05 [6]: Calamares::Settings::Settings(const QString&, bool)
    Using Calamares settings file at "/etc/calamares/settings.conf"
16:26:05 [2]: WARNING: ..  Required settings.conf key oem-setup is missing.
16:26:05 [2]: WARNING: ..  Required settings.conf key quit-at-end is missing.
16:26:05 [6]: void Logger::setupLogfile()
    Using log file: "/root/.cache/calamares/session.log"
16:26:05 [6]: void CalamaresApplication::init()
    Calamares version: 3.2.25
16:26:05 [6]: void CalamaresApplication::init()
            languages: "ar, as, ast, be, bg, ca, cs_CZ, da, de, el, en, en_GB, eo, es, es_MX, es_PR, et, eu, fi_FI, fr, gl, he, hi, hr, hu, id, is, it_IT, ja, ko, lt, ml, mr, nb, nl, pl, pt_BR, pt_PT, ro, ru, sk, sl, sq, sr, sr@latin, sv, th, tr_TR, uk, zh_CN, zh_TW"
16:26:05 [6]: bool CalamaresUtils::initQmlModulesDir()
    Using Calamares QML directory "/usr/share/calamares/qml"
16:26:05 [6]: Calamares::Branding::Branding(const QString&, QObject*)
    Using Calamares branding file at "/usr/share/calamares/branding/artix/branding.desc"
16:26:05 [2]: void Calamares::Branding::initSimpleSettings(const YAML::Node&)
    WARNING:Branding module-setting *windowPlacement* interpreted as "free"
16:26:05 [2]: void Calamares::flavorAndSide(const YAML::Node&, const char*, Calamares::Branding::PanelFlavor&, Calamares::Branding::PanelSide&)
    WARNING:Branding setting for sidebar is missing, using "widget" "left"
16:26:05 [2]: void Calamares::flavorAndSide(const YAML::Node&, const char*, Calamares::Branding::PanelFlavor&, Calamares::Branding::PanelSide&)
    WARNING:Branding setting for navigation is missing, using "widget" "bottom"
16:26:05 [2]: void CalamaresUtils::explainYamlException(const YAML::Exception&, const QByteArray&, const QString&)
    WARNING:YAML error  invalid node; first invalid key: "slideshowAPI" in "/usr/share/calamares/branding/artix/branding.desc" .
16:26:05 [1]: void bail(const QString&, const QString&)
    ERROR:FATAL in "/usr/share/calamares/branding/artix/branding.desc"
     invalid node; first invalid key: "slideshowAPI"
artix:[artix]:~$