Hey guys,
I´m new in the Artix world. Before I will install Artix on my main machine, I want to set up Armtix runit on a Raspberry Pi 4.
There I´d like to set up pihole and also letting run a Mysterium Network dVPN node.
Could somebody gives me a brief description on how to set up Armtix, as there is almost nothing about Armtix in the web.
And does the USB connection work well with Armtix, as I read there were some problems?
Thanks in advance
Have you checked the website? https://armtix.artixlinux.org/
In the "Info Pages" sectio there is RPI 4 section. https://info.armtixlinux.org/raspberrypi4.html
That is as far as I can go, be brave.
As
@SGOrava mentioned, there is an instructions page for rpi4, read it carefully. Rpi4 is probably the most problematic board i've seen, so be prepared if something goes wrong even if you follow this guide step by step. I recommend you to buy serial adapter to be able to debug problems and be able to work with rpi until these problems are fixed. Good luck!