Text only | Text with Images

Artix Linux Forum

Artix Linux => Installation / Migration / Configuration => Topic started by: goodfan53 on 15 March 2022, 10:45:50

Title: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: goodfan53 on 15 March 2022, 10:45:50
Console output:
Code: [Select]
:: running early hook [udev]
Starting version 250.3-1-artix
:: running hook [udev]
:: Triggering uevents...
:: running hook [artix]
:: running hook [artix_loop_mnt]
:: running hook [keymap]
:: Loading keymap...done
:: Mounting '/dev/disk/by-label/ARTIX_202201' to '/run/artix/bootmnt'
Waiting 30 seconds for device /dev/disk/by-label/ARTIX_202201 ...
ERROR: '/dev/disk/by-label/ARTIX_202201' device did not show up after 30 seconds...
    Falling back to interactive prompt
    You can try to fix the problem manually, log out when you are finished
The existing disk label is 'ARTIX_20220'
Solved by renaming it to 'ARTIX_202201' using mv
Title: Re: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: strajder on 15 March 2022, 13:22:21
I cannot reproduce the issue under QEMU, both booting through UEFI and BIOS mode. Can you post
Code: [Select]
inxi -F
output from LiveISO, as root?

Also, please verify
Code: [Select]
$ md5sum artix-plasma-openrc-20220123-x86_64.iso
4cb9e1ca2cbdf827ca221fcf2a61e4e4  artix-plasma-openrc-20220123-x86_64.iso

Edit: Perhaps the most important question: how did you transfer the ISO to the medium? The USB flash installation medium (https://wiki.archlinux.org/title/USB_flash_installation_medium) page lists some of the possible and reliable methods to do that. It is likely that the program you used truncated the disk label.
Title: Re: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: goodfan53 on 16 March 2022, 09:41:47
Quote from: strajder – on
I cannot reproduce the issue under QEMU, both booting through UEFI and BIOS mode. Can you post `inxi -F` output from LiveISO, as root?
Code: [Select]
System:    Host: artix-live Kernel: 5.16.1-artix1-1 x86_64 bits: 64 Console: pty pts/1 Distro: Artix Linux
Machine:   Type: Laptop System: LENOVO product: 2522BP6 v: ThinkPad T410 serial: R80AABA
           Mobo: LENOVO model: 2522BP6 serial: 1ZHXC0944UT BIOS: LENOVO v: 6IET72WW (1.32 )
           date: 08/27/2010
CPU:       Info: Dual Core model: Intel Core i5 M 520 bits: 64 type: MT MCP cache: L2: 3 MiB
           Speed: 1463 MHz min/max: 1199/2400 MHz Core speeds (MHz): 1: 1463 2: 1396 3: 1424 4: 1405
Graphics:  Device-1: Intel Core Processor Integrated Graphics driver: i915 v: kernel
           Device-2: Lenovo Integrated Webcam [R5U877] type: USB driver: uvcvideo
           Display: server: X.org 1.21.1.3 driver: loaded: intel unloaded: fbdev,modesetting,vesa
           resolution: <missing: xdpyinfo>
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio driver: snd_hda_intel
           Sound Server-1: ALSA v: k5.16.1-artix1-1 running: yes
           Sound Server-2: PulseAudio v: 15.0 running: yes
Network:   Device-1: Intel 82577LM Gigabit Network driver: e1000e
           IF: eth0 state: down mac: f0:de:f1:14:92:c6
           Device-2: Intel Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] driver: iwlwifi
           IF: wlan0 state: down mac: 8a:23:3f:5f:91:71
Drives:    Local Storage: total: 176.99 GiB used: 1.62 GiB (0.9%)
           ID-1: /dev/sda vendor: Samsung model: MZ7LN128HAHQ-000L1 size: 119.24 GiB
           ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 57.74 GiB
Swap:      Alert: No swap data was found.
Sensors:   System Temperatures: cpu: 46.0 C mobo: N/A
           Fan [quote author=strajder link=msg=24689 date=1647346941]Speeds (RPM): fan-1: 3597
Info:      Processes: 194 Uptime: 7m Memory: 3.64 GiB used: 842.9 MiB (22.6%) Shell: Bash inxi: 3.3.08

Quote from: strajder – on
Also, please verify
Code: [Select]
4cb9e1ca2cbdf827ca221fcf2a61e4e4  artix-plasma-openrc-20220123-x86_64.iso

Quote from: strajder – on
how did you transfer the ISO to the medium?
I used Rufus, set it to work with legacy BIOS.
Title: Re: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: strajder on 16 March 2022, 09:59:37
Quote from: goodfan53 – on
I used Rufus, set it to work with legacy BIOS.
The note on the linked Arch wiki article (https://wiki.archlinux.org/title/USB_flash_installation_medium#Using_Rufus) states:
Quote
Note: If the USB drive does not boot properly using the default ISO Image mode, DD Image mode should be used instead. To switch this mode on, select GPT from the Partition scheme drop-down menu. After clicking START you will get the mode selection dialog, select DD Image mode.

You can also try other listed methods.

Edit: For the sake of clarity, the ISO label is generated by:
https://gitea.artixlinux.org/artix/artools/src/branch/master/bin/iso/buildiso.in#L199
Code: [Select]
 iso_label="ARTIX_$(date +%Y%m)"
and
https://gitea.artixlinux.org/artix/artools/src/branch/master/lib/iso/iso.sh#L29
Code: [Select]
-volid "${iso_label}" \
and produces the label without a "typo", which can be verified by:
Code: [Select]
$ iso-info artix-plasma-openrc-20220123-x86_64.iso
iso-info version 2.1.0 x86_64-pc-linux-gnu
Copyright (c) 2003-2005, 2007-2008, 2011-2015, 2017 R. Bernstein
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
__________________________________
ISO 9660 image: artix-plasma-openrc-20220123-x86_64.iso
Application : ARTIX LINUX LIVE/RESCUE CD
Preparer    : PREPARED BY ARTOOLS/BUILDISO
Publisher   : ARTIX LINUX <HTTPS://WWW.ARTIXLINUX.ORG/>
Volume      : ARTIX_202201
No Joliet extensions
Title: Re: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: x230 on 16 March 2022, 10:38:58
Quote from: goodfan53 – on
I used Rufus

Use 'Ventoy' utility or 'dd' command
Title: Re: Disk label typo in artix-plasma-openrc-20220123-x86_64 installation.
Post by: cat herders of linux on 16 June 2022, 04:35:26
error /dev/disk/by-label/ARTIX_202201 device did not show up after 30 seconds  mate dinit btw  i got the error with rufus using iso mode using mbr as i am trying to boot the usb in legacy mode on elitedesk g3.  i have no hope with dd mode as that is what mintstick uses anbd my system wouldn't see it in legacy boot mode BUT i will try ventoy now and see how that goes.
Text only | Text with Images