Re: failed to load nvidia-uvm to failing to boot on start up Reply #15 – 22 February 2022, 00:33:51 Quote from: yerm – on 21 February 2022, 23:54:57No idea what kms I use. Do you by change have the commands that would be relevant to figuring that out?Also my /etc/mkinitcpio.conf just has information about hooks and binaries and files and whatnot.(probably just all the defaults) I might be reading something off the liveusb but I am in root so maybe not.I also noticed some firmware is missing here on my xanmod installs:Code: [Select]artix-live:[root]:/# sudo pacman -S linux-xanmod-edge-headerswarning: linux-xanmod-edge-headers-5.16.10-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-edge-headers-5.16.10-1Total Installed Size: 125.49 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-edge-headers [######################] 100%:: Running post-transaction hooks...(1/2) Updating module dependencies...(2/2) Install DKMS modulesartix-live:[root]:/# sudo pacman -S linux-xanmod-edge-ltserror: target not found: linux-xanmod-edge-ltsartix-live:[root]:/# sudo pacman -S linux-xanmod-ttwarning: linux-xanmod-tt-5.15.24-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-tt-5.15.24-1Total Installed Size: 342.94 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-tt [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt.img==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt-fallback.img -S autodetect==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt-fallback.img==> Image generation successfulartix-live:[root]:/# sudo pacman -S linux-xanmod-edgewarning: linux-xanmod-edge-5.16.10-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-edge-5.16.10-1Total Installed Size: 344.55 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-edge [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge.img==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge-fallback.img -S autodetect==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge-fallback.img==> Image generation successfulartix-live:[root]:/# sudo pacman -S linux-xanmod-ltswarning: linux-xanmod-lts-5.10.101-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-lts-5.10.101-1Total Installed Size: 302.56 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-lts [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts.img==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts-fallback.img -S autodetect==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts-fallback.img==> Image generation successfulartix-live:[root]:/#
Re: failed to load nvidia-uvm to failing to boot on start up Reply #16 – 22 February 2022, 00:46:55 Quote from: yerm – on 22 February 2022, 00:33:51Code: [Select]artix-live:[root]:/# sudo pacman -S linux-xanmod-edge-headerswarning: linux-xanmod-edge-headers-5.16.10-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-edge-headers-5.16.10-1Total Installed Size: 125.49 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-edge-headers [######################] 100%:: Running post-transaction hooks...(1/2) Updating module dependencies...(2/2) Install DKMS modulesartix-live:[root]:/# sudo pacman -S linux-xanmod-edge-ltserror: target not found: linux-xanmod-edge-ltsartix-live:[root]:/# sudo pacman -S linux-xanmod-ttwarning: linux-xanmod-tt-5.15.24-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-tt-5.15.24-1Total Installed Size: 342.94 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-tt [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt.img==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt-fallback.img -S autodetect==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt-fallback.img==> Image generation successfulartix-live:[root]:/# sudo pacman -S linux-xanmod-edgewarning: linux-xanmod-edge-5.16.10-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-edge-5.16.10-1Total Installed Size: 344.55 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-edge [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge.img==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge-fallback.img -S autodetect==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge-fallback.img==> Image generation successfulartix-live:[root]:/# sudo pacman -S linux-xanmod-ltswarning: linux-xanmod-lts-5.10.101-1 is up to date -- reinstallingresolving dependencies...looking for conflicting packages...Packages (1) linux-xanmod-lts-5.10.101-1Total Installed Size: 302.56 MiBNet Upgrade Size: 0.00 MiB:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [######################] 100%(1/1) checking package integrity [######################] 100%(1/1) loading package files [######################] 100%(1/1) checking for file conflicts [######################] 100%(1/1) checking available disk space [######################] 100%:: Running pre-transaction hooks...(1/1) Remove upgraded DKMS modules:: Processing package changes...(1/1) reinstalling linux-xanmod-lts [######################] 100%:: Running post-transaction hooks...(1/3) Updating module dependencies...(2/3) Install DKMS modules(3/3) Updating linux initcpios...==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts.img==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts.img==> Image generation successful==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts-fallback.img -S autodetect==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts-fallback.img==> Image generation successfulartix-live:[root]:/# Those "possibly" missing firmware are "possibly" missing. Read each one, do you have that hardware? If not you can ignore the message because you don't need that firmware since you don't have the hardware.Also not related to this nvidia thing.
Re: failed to load nvidia-uvm to failing to boot on start up Reply #17 – 22 February 2022, 01:05:41 Quote from: Chris Cromer – on 22 February 2022, 00:46:55Those "possibly" missing firmware are "possibly" missing. Read each one, do you have that hardware? If not you can ignore the message because you don't need that firmware since you don't have the hardware.Also not related to this nvidia thing.Ah sorry that makes sense.I added the commands to /etc/mkinitcpio but running "sudo mkinitcpio -P" gives me this output with "module not found:". Should I be worried about this?Code: [Select]artix-live:[root]:/# sudo mkinitcpio -P==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default' -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img==> Starting build: 5.15.24-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect==> Starting build: 5.15.24-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img==> Starting build: 5.16.10-artix1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect==> Starting build: 5.16.10-artix1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge.img==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge-fallback.img -S autodetect==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts.img==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts-fallback.img -S autodetect==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt.img==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt-fallback.img -S autodetect==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.I don't think is worked as well, it gave me the same error with not boot into my DE
Re: failed to load nvidia-uvm to failing to boot on start up Reply #18 – 22 February 2022, 01:12:47 Quote from: yerm – on 22 February 2022, 01:05:41Ah sorry that makes sense.I added the commands to /etc/mkinitcpio but running "sudo mkinitcpio -P" gives me this output with "module not found:". Should I be worried about this?Code: [Select]artix-live:[root]:/# sudo mkinitcpio -P==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default' -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img==> Starting build: 5.15.24-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect==> Starting build: 5.15.24-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img==> Starting build: 5.16.10-artix1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect==> Starting build: 5.16.10-artix1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge.img==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-edge.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-edge -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-edge-fallback.img -S autodetect==> Starting build: 5.16.10-xanmod1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-edge-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts.img==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-lts.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-lts-fallback.img -S autodetect==> Starting build: 5.10.101-xanmod1-1-lts -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-lts-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'default' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt.img==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt.img==> WARNING: errors were encountered during the build. The image may not be complete.==> Building image from preset: /etc/mkinitcpio.d/linux-xanmod-tt.preset: 'fallback' -> -k /boot/vmlinuz-linux-xanmod-tt -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-xanmod-tt-fallback.img -S autodetect==> Starting build: 5.15.24-xanmod1-tt-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block]==> WARNING: Possibly missing firmware for module: qed==> WARNING: Possibly missing firmware for module: wd719x==> WARNING: Possibly missing firmware for module: qla1280==> WARNING: Possibly missing firmware for module: aic94xx==> WARNING: Possibly missing firmware for module: qla2xxx==> WARNING: Possibly missing firmware for module: bfa==> WARNING: Possibly missing firmware for module: xhci_pci -> Running build hook: [keyboard] -> Running build hook: [keymap] -> Running build hook: [consolefont]==> WARNING: consolefont: no font found in configuration -> Running build hook: [filesystems] -> Running build hook: [fsck]==> ERROR: module not found: `nvidia'==> ERROR: module not found: `nvidia_modeset'==> ERROR: module not found: `nvidia_uvm'==> ERROR: module not found: `nvidia_drm'==> Generating module dependencies==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-xanmod-tt-fallback.img==> WARNING: errors were encountered during the build. The image may not be complete.I don't think is worked as well, it gave me the same error with not boot into my DEYou are not supposed to be running those commands and modifying those files in the ISO. You are supposed to chroot into your install then do that stuff.
Re: failed to load nvidia-uvm to failing to boot on start up Reply #19 – 22 February 2022, 01:21:25 Quote from: Chris Cromer – on 22 February 2022, 01:12:47You are not supposed to be running those commands and modifying those files in the ISO. You are supposed to chroot into your install then do that stuff.Every time I boot into my liveusb I am running this to chroot into my installCode: [Select] sudo mount /dev/sda1 /mntmount -t proc /proc /mnt/procmount --rbind /sys /mnt/sysmount --rbind /dev /mnt/devsudo chroot /mnt /bin/bashAm I not doing this correctly?
Re: failed to load nvidia-uvm to failing to boot on start up Reply #20 – 22 February 2022, 01:40:52 Quote from: yerm – on 22 February 2022, 01:21:25Every time I boot into my liveusb I am running this to chroot into my installCode: [Select] sudo mount /dev/sda1 /mntmount -t proc /proc /mnt/procmount --rbind /sys /mnt/sysmount --rbind /dev /mnt/devsudo chroot /mnt /bin/bashAm I not doing this correctly?Techically that works... but you can use:Code: [Select]sudo mount /dev/sda1 /mntsudo artix-chroot /mnt /bin/bashMuch easier.Sorry, I misunderstood something and thought you were not in the chroot.Please uninstall nvidia package and install nvidia-dkms. The nvidia package only works with the "linux" kernel. It doesn't work with linux-lts nor linux-zen. However nvidia-dkms will work with all 3 and will fix those errors of missing nvidia modules for the lts kernel.
Re: failed to load nvidia-uvm to failing to boot on start up Reply #21 – 22 February 2022, 06:45:08 This fix worked with my issue. Thanks for the support friend!