Skip to main content ↑ ↓
Topic: Armtix on RPI5 (Read 824 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.

Armtix on RPI5

I have armtix working on rpi5. effectively using a duplicated armtix rpi4 sd card I followed the technique
of https://github.com/archlinuxarm/PKGBUILDs/tree/master/core/linux-rpi to get a working boot.

I used the alarm pkgbuild from here https://github.com/archlinuxarm/PKGBUILDs/tree/master/core/linux-rpi with a change of package name and a change of linux logo to get a package linux-armtix-rpi5.

Also need to install rpi5-eeprom package and do a conf file for X11 to make vc4 kms work.

with dtparam=nvme in config.txt I can also see an nvme drive.

Re: Armtix on RPI5

Reply #1 –
Could you write instructions page for that board? Also, does linux-rpi-16k from ALARM make any sense then?
ARMtix

Re: Armtix on RPI5

Reply #2 –
I will put my PKGBUILD etc etc up on github. If I can I will also try and write a README detailing the steps I took. I started from a running rpi4 install though. That setup was much harder since I started from a manjaro kernel and their split of the various RPI packages is different to alarm.

Re: Armtix on RPI5

Reply #3 –
Quote from: phoenix_king_rus – on
Could you write instructions page for that board? Also, does linux-rpi-16k from ALARM make any sense then?

I have created an initial git repo here https://github.com/armtix-robin/linux-armtix-rpi5

Will create some kind of README.md later.

I started with the simple rpi5 as that allows me to start from manjaro.

Not sure I really understand what the 16k is all about do these small boards need 16k pages?

Re: Armtix on RPI5

Reply #4 –
I created a construction readme at https://github.com/armtix-robin/linux-armtix-rpi5/

I used a latest runit image from armtix as a starting point and smashed the alarm kernel onto it.

Please have a read and see if it's usable.

*NB* the PKGBUILD in the repo is almost identical to the one I used in the README which is latest alarm.
It's probably a bit behind, but all it does is change the name and add an artix cpu counter image instead of the raspberries that RPI has.

Re: Armtix on RPI5

Reply #5 –
Quote from: replabrobin – on
Not sure I really understand what the 16k is all about do these small boards need 16k pages?

I see this message installing my kernel

Code: [Select]
For optimal performance on RPi5, consider installing the
 linux-rpi-16k kernel package instead of linux-rpi

So I will try building the 16k kernel at the weekend. Any ideas how any improvement could be demonstrated?

Edit: there's a discussion here
 

Re: Armtix on RPI5

Reply #6 –
I built and installed linux-armtix-rpi5-16k. It seems to boot OK.