Skip to main content ↑ ↓
Topic: Bluetooth earphones not longer auto output on connect since dp monitor add (Read 468 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Bluetooth earphones not longer auto output on connect since dp monitor add

Hi,
my system used to switch audio output automatic to the just connected bluetooth earphones.
I recently added an external display port monitor with audio.
Now the audio output does not automatic switch to the just connected bluetooth earphones.
I have to manually select the bluetooth earphones as output device.

Is there a Audio Output Device Priority ?
Any idea ?


inxi:
Code: [Select]
System:
  Kernel: 6.8.9-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 14.1.1
  Desktop: MATE v: 1.28.2 wm: marco dm: LightDM Distro: Artix
    base: Arch Linux

Audio:
  Device-1: Intel Haswell-ULT HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c
  Device-2: Intel 8 Series HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20
  API: ALSA v: k6.8.9-zen1-2-zen status: kernel-api
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 1.0.6 status: off with: wireplumber status: off
  Server-3: PulseAudio v: 17.0 status: active

Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 bus-ID: 2-7:7 chip-ID: 8087:07dc
  Report: btmgmt ID: hci0 rfk-id: 15 state: up address: <filter> bt-v: 4.0
    lmp-v: 6

Re: Bluetooth earphones not longer auto output on connect since dp monitor add

Reply #1 –
Not sure if this helps you, but in pavucontrol (I use it with pipewire and pipewire-pulse) you can click the box with the tooltip "set as default" (checkmark icon) under the "Output Devices" tab.

There is probably a way to set this through .conf files as well I would imagine.

Re: Bluetooth earphones not longer auto output on connect since dp monitor add

Reply #2 –
Hi Wolzly,

making the bluetooth earphones the default would be not that easy because

1. The kernel/alsa don't know about them:
cat /proc/asound/cards

Code: [Select]
 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xe0630000 irq 62
 1 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xe0634000 irq 63
There are dynamic added to the system.
And 2. to make it more complex, I have two pairs of the same bluetooth earphones with different bluetooth alias names to keep
them apart.
I tried setting them as default in pavucontrol. But as soon as I disconnect them, they get "forgotten" as default.

Re: Bluetooth earphones not longer auto output on connect since dp monitor add

Reply #3 –
Hmm that's odd.  My bluetooth headphones retake the default status when they are reconnected.  Don't think I did anything fancy to make that happen, it just seems to work.  If my bluetooth's battery dies, my wired headphones are automatically putting out the audio, and if I reconnect the charged bluetooths then they take the audio back.

Maybe this could be helpful?
https://wiki.archlinux.org/title/PulseAudio/Examples#Set_the_default_output_sink

Re: Bluetooth earphones not longer auto output on connect since dp monitor add

Reply #4 –
I solved my problem, well, sort of.
I disabled the analog part of my sound chip with:
/etc/modprobe.d/alsa.conf:
Code: [Select]
# disable analog output/input
options snd-hda-intel model=digital-only
drawback: no more mic input. :(
Now with one sound card less the automatic switching to/from the Bluetooth earphones work again.

I don't like the way the Linux bluetooth management is done. It is very Microsoft like.
Automatic connections work most of the time until they don't. Manual connections does not work.
I would be ashamed to deliver such a low level of reliability.
 

Re: Bluetooth earphones not longer auto output on connect since dp monitor add

Reply #5 –
Quote from: Andy – on
I don't like the way the Linux bluetooth management is done. It is very Microsoft like.
Imho, what is "Microsoft like" is pulseaudio:

I have been using alsa only for several years.
I removed all pulse packets except libpulse and libcanberra.

I use alsa and the nice and very practical qastools mixer on different pc:
https://forum.artixlinux.org/index.php/topic,4318.msg27848.html#msg27848

Note: I don't play games and don't use wine or steam.
But I have sound in all my apps.