[SOLVED] Mouse clicks not recognized upon startup

Topic: [SOLVED] Mouse clicks not recognized upon startup (Read 1036 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.

[SOLVED] Mouse clicks not recognized upon startup

10 October 2020, 19:38:54

Kernel	5.8.14
DE	KDE Plasma 5.19.5
Mouse	Logitech G500

After booting up and logging in, and once the whole plasma shell starts, I can't click on anything.
Moving my mouse moves the cursor correctly, but the clicks (both left and right) are not registering.
Hovering the cursor above icons in the taskbar doesn't even highlight the items, nor are there any popups when hovering above the clock or anything else.
Thus far the only quick&dirty fix I've found for this is to switch to a different tty and then switch back (ctrl+alt+f1/7).
This also happens seemingly randomly (thankfully not often) while browsing the internet or after some period of inactivity.
I'm not really sure if there are any logs that would contain information about this.
I'm also using piper 0.5 and libratbag 0.14, but after removing them and rebooting the computer the problem still persists.
Note this started happening after I -Syu'd on 2020-10-02.

Here's the packages that were updated then:
Spoiler (click to show/hide)

Honestly I'm not really sure if this is a KDE issue or not, I'm just more open to suggestions as to what even is causing this.
Also worth of note I suppose is that while piper and libratbag were installed (in the last week), I could not configure any of the extra mouse buttons to act as middle mouse click.
That just wouldn't register no matter what, not even in xev.
Before the problem started, the buttons were are working fine.
I thought the nvidia fix would resolve it, but I guess it's something else.

Re: Mouse clicks not recognized upon startup

Reply #1 – 10 October 2020, 22:00:13

put here

Code: [Select]

cat /var/log/Xorg.0.log

that can be teoretically due low battery, or low signal/ big distance between reciever and mouse too. hard to say, at such a distance. If this would cause problems in another DE, then it will not be a KDE problem.

piper is uninstalled, but config files persist, you must remove config's files or another changes, what piper did in system too

Re: Mouse clicks not recognized upon startup

Reply #2 – 11 October 2020, 14:13:13

Here's the Xorg log fresh from a startup.
Lines 506-567 are after I switched to a tty and back.

Code: [Select]

[    16.969] (--) Log file renamed from "/var/log/Xorg.pid-2829.log" to "/var/log/Xorg.0.log"
[    16.999] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    16.999] Build Operating System: Linux Artix Linux
[    16.999] Current Operating System: Linux kayvaan-pc 5.8.14-artix1-1 #1 SMP PREEMPT Thu, 08 Oct 2020 09:51:02 +0000 x86_64
[    16.999] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda3 rw net.ifnames=0 quiet resume=UUID=9532526b-3bb5-4b6e-b49a-4158e597c2f0
[    16.999] Build Date: 02 September 2020  08:51:09AM
[    16.999]  
[    16.999] Current version of pixman: 0.40.0
[    16.999] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    16.999] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.999] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  1 01:00:48 2009
[    17.020] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.020] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.053] (==) No Layout section.  Using the first Screen section.
[    17.053] (==) No screen section available. Using defaults.
[    17.053] (**) |-->Screen "Default Screen Section" (0)
[    17.053] (**) |   |-->Monitor "<default monitor>"
[    17.053] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    17.053] (==) Automatically adding devices
[    17.053] (==) Automatically enabling devices
[    17.053] (==) Automatically adding GPU devices
[    17.053] (==) Automatically binding GPU devices
[    17.053] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    17.064] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    17.064] 	Entry deleted from font path.
[    17.064] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    17.064] 	Entry deleted from font path.
[    17.064] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    17.064] 	Entry deleted from font path.
[    17.064] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    17.065] 	Entry deleted from font path.
[    17.065] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF
[    17.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.065] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.065] (II) Module ABI versions:
[    17.065] 	X.Org ANSI C Emulation: 0.4
[    17.065] 	X.Org Video Driver: 24.1
[    17.065] 	X.Org XInput driver : 24.1
[    17.065] 	X.Org Server Extension : 10.0
[    17.065] (++) using VT number 7

[    17.065] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    17.066] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.066] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    17.067] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    17.069] (--) PCI:*(1@0:0:0) 10de:1c82:10de:1c82 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    17.069] (II) Open ACPI successful (/var/run/acpid.socket)
[    17.069] (II) LoadModule: "glx"
[    17.094] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.162] (II) Module glx: vendor="X.Org Foundation"
[    17.162] 	compiled for 1.20.9, module version = 1.0.0
[    17.162] 	ABI class: X.Org Server Extension, version 10.0
[    17.162] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    17.162] 	loading driver: nvidia
[    17.162] (==) Matched nvidia as autoconfigured driver 0
[    17.162] (==) Matched nouveau as autoconfigured driver 1
[    17.162] (==) Matched nv as autoconfigured driver 2
[    17.162] (==) Matched modesetting as autoconfigured driver 3
[    17.162] (==) Matched fbdev as autoconfigured driver 4
[    17.162] (==) Matched vesa as autoconfigured driver 5
[    17.162] (==) Assigned the driver to the xf86ConfigLayout
[    17.162] (II) LoadModule: "nvidia"
[    17.162] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    17.228] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.228] 	compiled for 1.6.99.901, module version = 1.0.0
[    17.228] 	Module class: X.Org Video Driver
[    17.235] (II) LoadModule: "nouveau"
[    17.235] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.248] (II) Module nouveau: vendor="X.Org Foundation"
[    17.248] 	compiled for 1.20.8, module version = 1.0.16
[    17.248] 	Module class: X.Org Video Driver
[    17.248] 	ABI class: X.Org Video Driver, version 24.1
[    17.248] (II) LoadModule: "nv"
[    17.249] (WW) Warning, couldn't open module nv
[    17.249] (EE) Failed to load module "nv" (module does not exist, 0)
[    17.249] (II) LoadModule: "modesetting"
[    17.249] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.269] (II) Module modesetting: vendor="X.Org Foundation"
[    17.269] 	compiled for 1.20.9, module version = 1.20.9
[    17.269] 	Module class: X.Org Video Driver
[    17.269] 	ABI class: X.Org Video Driver, version 24.1
[    17.269] (II) LoadModule: "fbdev"
[    17.269] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.270] (II) Module fbdev: vendor="X.Org Foundation"
[    17.270] 	compiled for 1.20.8, module version = 0.5.0
[    17.270] 	Module class: X.Org Video Driver
[    17.270] 	ABI class: X.Org Video Driver, version 24.1
[    17.270] (II) LoadModule: "vesa"
[    17.270] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.282] (II) Module vesa: vendor="X.Org Foundation"
[    17.282] 	compiled for 1.20.9, module version = 2.5.0
[    17.282] 	Module class: X.Org Video Driver
[    17.282] 	ABI class: X.Org Video Driver, version 24.1
[    17.283] (II) NVIDIA dlloader X Driver  455.28  Wed Sep 30 01:04:06 UTC 2020
[    17.283] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.283] (II) NOUVEAU driver 
[    17.283] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.283] 	RIVA TNT            (NV04)
[    17.283] 	RIVA TNT2           (NV05)
[    17.283] 	GeForce 256         (NV10)
[    17.283] 	GeForce 2           (NV11, NV15)
[    17.283] 	GeForce 4MX         (NV17, NV18)
[    17.283] 	GeForce 3           (NV20)
[    17.283] 	GeForce 4Ti         (NV25, NV28)
[    17.283] 	GeForce FX          (NV3x)
[    17.283] 	GeForce 6           (NV4x)
[    17.283] 	GeForce 7           (G7x)
[    17.283] 	GeForce 8           (G8x)
[    17.283] 	GeForce 9           (G9x)
[    17.283] 	GeForce GTX 2xx/3xx (GT2xx)
[    17.283] 	GeForce GTX 4xx/5xx (GFxxx)
[    17.283] 	GeForce GTX 6xx/7xx (GKxxx)
[    17.283] 	GeForce GTX 9xx     (GMxxx)
[    17.283] 	GeForce GTX 10xx    (GPxxx)
[    17.283] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.283] (II) FBDEV: driver for framebuffer: fbdev
[    17.283] (II) VESA: driver for VESA chipsets: vesa
[    17.296] (II) Loading sub module "fb"
[    17.296] (II) LoadModule: "fb"
[    17.296] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.297] (II) Module fb: vendor="X.Org Foundation"
[    17.297] 	compiled for 1.20.9, module version = 1.0.0
[    17.297] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.297] (II) Loading sub module "wfb"
[    17.297] (II) LoadModule: "wfb"
[    17.297] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.309] (II) Module wfb: vendor="X.Org Foundation"
[    17.309] 	compiled for 1.20.9, module version = 1.0.0
[    17.309] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.309] (II) Loading sub module "ramdac"
[    17.309] (II) LoadModule: "ramdac"
[    17.309] (II) Module "ramdac" already built-in
[    17.311] (WW) Falling back to old probe method for modesetting
[    17.311] (WW) Falling back to old probe method for fbdev
[    17.311] (II) Loading sub module "fbdevhw"
[    17.311] (II) LoadModule: "fbdevhw"
[    17.311] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.316] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.317] 	compiled for 1.20.9, module version = 0.0.2
[    17.317] 	ABI class: X.Org Video Driver, version 24.1
[    17.317] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.317] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    17.317] (==) NVIDIA(0): RGB weight 888
[    17.317] (==) NVIDIA(0): Default visual is TrueColor
[    17.317] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.318] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    17.318] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    17.318] (**) NVIDIA(0): Enabling 2D acceleration
[    17.318] (II) Loading sub module "glxserver_nvidia"
[    17.318] (II) LoadModule: "glxserver_nvidia"
[    17.318] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    17.904] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    17.904] 	compiled for 1.6.99.901, module version = 1.0.0
[    17.904] 	Module class: X.Org Server Extension
[    17.912] (II) NVIDIA GLX Module  455.28  Wed Sep 30 01:01:28 UTC 2020
[    17.926] (II) NVIDIA: The X server supports PRIME Render Offload.
[    18.652] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    18.652] (--) NVIDIA(0):     DFP-0 (boot)
[    18.652] (--) NVIDIA(0):     DFP-1
[    18.652] (--) NVIDIA(0):     DFP-2
[    18.652] (--) NVIDIA(0):     DFP-3
[    18.653] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[    18.653] (--) NVIDIA(0): Memory: 4194304 kBytes
[    18.653] (--) NVIDIA(0): VideoBIOS: 86.07.59.00.cb
[    18.653] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    18.682] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): connected
[    18.682] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): Internal TMDS
[    18.682] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): 330.0 MHz maximum pixel clock
[    18.682] (--) NVIDIA(GPU-0): 
[    18.682] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    18.682] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    18.682] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    18.682] (--) NVIDIA(GPU-0): 
[    18.682] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    18.682] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    18.682] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    18.682] (--) NVIDIA(GPU-0): 
[    18.682] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    18.682] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    18.682] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    18.682] (--) NVIDIA(GPU-0): 
[    18.686] (==) NVIDIA(0): 
[    18.686] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    18.686] (==) NVIDIA(0):     will be used as the requested mode.
[    18.686] (==) NVIDIA(0): 
[    18.686] (II) NVIDIA(0): Validated MetaModes:
[    18.686] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    18.686] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    18.690] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    18.690] (--) NVIDIA(0):     option
[    18.690] (II) UnloadModule: "nouveau"
[    18.690] (II) Unloading nouveau
[    18.690] (II) UnloadModule: "modesetting"
[    18.690] (II) Unloading modesetting
[    18.690] (II) UnloadModule: "fbdev"
[    18.690] (II) Unloading fbdev
[    18.690] (II) UnloadSubModule: "fbdevhw"
[    18.690] (II) Unloading fbdevhw
[    18.690] (II) UnloadModule: "vesa"
[    18.690] (II) Unloading vesa
[    18.691] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    18.691] (II) NVIDIA:     access.
[    18.717] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    18.778] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.778] (==) NVIDIA(0): Backing store enabled
[    18.778] (==) NVIDIA(0): Silken mouse disabled
[    18.778] (==) NVIDIA(0): DPMS enabled
[    18.778] (II) Loading sub module "dri2"
[    18.778] (II) LoadModule: "dri2"
[    18.778] (II) Module "dri2" already built-in
[    18.778] (II) NVIDIA(0): [DRI2] Setup complete
[    18.778] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.793] (II) Initializing extension Generic Event Extension
[    18.794] (II) Initializing extension SHAPE
[    18.794] (II) Initializing extension MIT-SHM
[    18.794] (II) Initializing extension XInputExtension
[    18.794] (II) Initializing extension XTEST
[    18.794] (II) Initializing extension BIG-REQUESTS
[    18.794] (II) Initializing extension SYNC
[    18.794] (II) Initializing extension XKEYBOARD
[    18.795] (II) Initializing extension XC-MISC
[    18.795] (II) Initializing extension SECURITY
[    18.795] (II) Initializing extension XFIXES
[    18.795] (II) Initializing extension RENDER
[    18.795] (II) Initializing extension RANDR
[    18.796] (II) Initializing extension COMPOSITE
[    18.796] (II) Initializing extension DAMAGE
[    18.796] (II) Initializing extension MIT-SCREEN-SAVER
[    18.796] (II) Initializing extension DOUBLE-BUFFER
[    18.796] (II) Initializing extension RECORD
[    18.796] (II) Initializing extension DPMS
[    18.796] (II) Initializing extension Present
[    18.796] (II) Initializing extension DRI3
[    18.796] (II) Initializing extension X-Resource
[    18.796] (II) Initializing extension XVideo
[    18.796] (II) Initializing extension XVideo-MotionCompensation
[    18.796] (II) Initializing extension GLX
[    18.797] (II) Initializing extension GLX
[    18.797] (II) Indirect GLX disabled.
[    18.797] (II) GLX: Another vendor is already registered for screen 0
[    18.797] (II) Initializing extension XFree86-VidModeExtension
[    18.797] (II) Initializing extension XFree86-DGA
[    18.797] (II) Initializing extension XFree86-DRI
[    18.797] (II) Initializing extension DRI2
[    18.797] (II) Initializing extension NV-GLX
[    18.797] (II) Initializing extension NV-CONTROL
[    18.797] (II) Initializing extension XINERAMA
[    19.085] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    19.085] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    19.085] (**) Power Button: Applying InputClass "system-keyboard"
[    19.085] (II) LoadModule: "libinput"
[    19.086] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    19.115] (II) Module libinput: vendor="X.Org Foundation"
[    19.115] 	compiled for 1.20.8, module version = 0.30.0
[    19.115] 	Module class: X.Org XInput Driver
[    19.115] 	ABI class: X.Org XInput driver, version 24.1
[    19.115] (II) Using input driver 'libinput' for 'Power Button'
[    19.115] (**) Power Button: always reports core events
[    19.115] (**) Option "Device" "/dev/input/event1"
[    19.115] (**) Option "_source" "server/udev"
[    19.162] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    19.163] (II) event1  - Power Button: device is a keyboard
[    19.163] (II) event1  - Power Button: device removed
[    19.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    19.185] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.185] (**) Option "xkb_model" "pc105"
[    19.185] (**) Option "xkb_layout" "hr"
[    19.205] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    19.205] (II) event1  - Power Button: device is a keyboard
[    19.206] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    19.206] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    19.206] (**) Power Button: Applying InputClass "system-keyboard"
[    19.206] (II) Using input driver 'libinput' for 'Power Button'
[    19.206] (**) Power Button: always reports core events
[    19.206] (**) Option "Device" "/dev/input/event0"
[    19.206] (**) Option "_source" "server/udev"
[    19.207] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    19.207] (II) event0  - Power Button: device is a keyboard
[    19.207] (II) event0  - Power Button: device removed
[    19.239] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    19.239] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    19.239] (**) Option "xkb_model" "pc105"
[    19.239] (**) Option "xkb_layout" "hr"
[    19.240] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    19.240] (II) event0  - Power Button: device is a keyboard
[    19.241] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event3)
[    19.241] (II) No input driver specified, ignoring this device.
[    19.241] (II) This device may have been added with another device file.
[    19.241] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event4)
[    19.241] (II) No input driver specified, ignoring this device.
[    19.241] (II) This device may have been added with another device file.
[    19.241] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event5)
[    19.241] (II) No input driver specified, ignoring this device.
[    19.241] (II) This device may have been added with another device file.
[    19.241] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event6)
[    19.241] (II) No input driver specified, ignoring this device.
[    19.242] (II) This device may have been added with another device file.
[    19.242] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event7)
[    19.242] (II) No input driver specified, ignoring this device.
[    19.242] (II) This device may have been added with another device file.
[    19.242] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event8)
[    19.242] (II) No input driver specified, ignoring this device.
[    19.242] (II) This device may have been added with another device file.
[    19.242] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[    19.242] (II) No input driver specified, ignoring this device.
[    19.242] (II) This device may have been added with another device file.
[    19.243] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[    19.243] (II) No input driver specified, ignoring this device.
[    19.243] (II) This device may have been added with another device file.
[    19.243] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[    19.243] (II) No input driver specified, ignoring this device.
[    19.243] (II) This device may have been added with another device file.
[    19.243] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[    19.243] (II) No input driver specified, ignoring this device.
[    19.243] (II) This device may have been added with another device file.
[    19.243] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[    19.243] (II) No input driver specified, ignoring this device.
[    19.243] (II) This device may have been added with another device file.
[    19.243] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[    19.244] (II) No input driver specified, ignoring this device.
[    19.244] (II) This device may have been added with another device file.
[    19.244] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[    19.244] (II) No input driver specified, ignoring this device.
[    19.244] (II) This device may have been added with another device file.
[    19.244] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[    19.244] (II) No input driver specified, ignoring this device.
[    19.244] (II) This device may have been added with another device file.
[    19.244] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    19.244] (II) No input driver specified, ignoring this device.
[    19.244] (II) This device may have been added with another device file.
[    19.245] (II) config/udev: Adding input device Logitech G500 (/dev/input/event18)
[    19.245] (**) Logitech G500: Applying InputClass "libinput pointer catchall"
[    19.245] (II) Using input driver 'libinput' for 'Logitech G500'
[    19.245] (**) Logitech G500: always reports core events
[    19.245] (**) Option "Device" "/dev/input/event18"
[    19.245] (**) Option "_source" "server/udev"
[    19.300] (II) event18 - Logitech G500: is tagged by udev as: Mouse
[    19.300] (II) event18 - Logitech G500: device set to 1600 DPI
[    19.300] (II) event18 - Logitech G500: device is a pointer
[    19.300] (II) event18 - Logitech G500: device removed
[    19.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/0003:046D:C068.0001/input/input18/event18"
[    19.359] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 8)
[    19.359] (**) Option "AccelerationScheme" "none"
[    19.359] (**) Logitech G500: (accel) selected scheme none/0
[    19.359] (**) Logitech G500: (accel) acceleration factor: 2.000
[    19.359] (**) Logitech G500: (accel) acceleration threshold: 4
[    19.416] (II) event18 - Logitech G500: is tagged by udev as: Mouse
[    19.417] (II) event18 - Logitech G500: device set to 1600 DPI
[    19.417] (II) event18 - Logitech G500: device is a pointer
[    19.417] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[    19.417] (II) No input driver specified, ignoring this device.
[    19.417] (II) This device may have been added with another device file.
[    19.418] (II) config/udev: Adding input device Logitech G500 Keyboard (/dev/input/event19)
[    19.418] (**) Logitech G500 Keyboard: Applying InputClass "libinput keyboard catchall"
[    19.418] (**) Logitech G500 Keyboard: Applying InputClass "system-keyboard"
[    19.418] (II) Using input driver 'libinput' for 'Logitech G500 Keyboard'
[    19.418] (**) Logitech G500 Keyboard: always reports core events
[    19.418] (**) Option "Device" "/dev/input/event19"
[    19.418] (**) Option "_source" "server/udev"
[    19.419] (II) event19 - Logitech G500 Keyboard: is tagged by udev as: Keyboard
[    19.419] (II) event19 - Logitech G500 Keyboard: device is a keyboard
[    19.420] (II) event19 - Logitech G500 Keyboard: device removed
[    19.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C068.0002/input/input19/event19"
[    19.452] (II) XINPUT: Adding extended input device "Logitech G500 Keyboard" (type: KEYBOARD, id 9)
[    19.452] (**) Option "xkb_model" "pc105"
[    19.452] (**) Option "xkb_layout" "hr"
[    19.454] (II) event19 - Logitech G500 Keyboard: is tagged by udev as: Keyboard
[    19.454] (II) event19 - Logitech G500 Keyboard: device is a keyboard
[    19.455] (II) config/udev: Adding input device Logitech G500 Consumer Control (/dev/input/event20)
[    19.455] (**) Logitech G500 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    19.455] (**) Logitech G500 Consumer Control: Applying InputClass "system-keyboard"
[    19.455] (II) Using input driver 'libinput' for 'Logitech G500 Consumer Control'
[    19.455] (**) Logitech G500 Consumer Control: always reports core events
[    19.455] (**) Option "Device" "/dev/input/event20"
[    19.455] (**) Option "_source" "server/udev"
[    19.456] (II) event20 - Logitech G500 Consumer Control: is tagged by udev as: Keyboard
[    19.456] (II) event20 - Logitech G500 Consumer Control: device is a keyboard
[    19.456] (II) event20 - Logitech G500 Consumer Control: device removed
[    19.492] (II) libinput: Logitech G500 Consumer Control: needs a virtual subdevice
[    19.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C068.0002/input/input20/event20"
[    19.492] (II) XINPUT: Adding extended input device "Logitech G500 Consumer Control" (type: MOUSE, id 10)
[    19.492] (**) Option "AccelerationScheme" "none"
[    19.492] (**) Logitech G500 Consumer Control: (accel) selected scheme none/0
[    19.492] (**) Logitech G500 Consumer Control: (accel) acceleration factor: 2.000
[    19.492] (**) Logitech G500 Consumer Control: (accel) acceleration threshold: 4
[    19.494] (II) event20 - Logitech G500 Consumer Control: is tagged by udev as: Keyboard
[    19.494] (II) event20 - Logitech G500 Consumer Control: device is a keyboard
[    19.494] (II) config/udev: Adding input device LOGITECH G110 G-keys Keypad (/dev/input/event21)
[    19.494] (**) LOGITECH G110 G-keys Keypad: Applying InputClass "libinput keyboard catchall"
[    19.494] (**) LOGITECH G110 G-keys Keypad: Applying InputClass "system-keyboard"
[    19.494] (II) Using input driver 'libinput' for 'LOGITECH G110 G-keys Keypad'
[    19.494] (**) LOGITECH G110 G-keys Keypad: always reports core events
[    19.494] (**) Option "Device" "/dev/input/event21"
[    19.494] (**) Option "_source" "server/udev"
[    19.496] (II) event21 - LOGITECH G110 G-keys Keypad: is tagged by udev as: Keyboard
[    19.496] (II) event21 - LOGITECH G110 G-keys Keypad: device is a keyboard
[    19.496] (II) event21 - LOGITECH G110 G-keys Keypad: device removed
[    19.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.1/3-1.8.1:1.0/0003:046D:C22B.0003/input/input23/event21"
[    19.532] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys Keypad" (type: KEYBOARD, id 11)
[    19.532] (**) Option "xkb_model" "pc105"
[    19.532] (**) Option "xkb_layout" "hr"
[    19.534] (II) event21 - LOGITECH G110 G-keys Keypad: is tagged by udev as: Keyboard
[    19.534] (II) event21 - LOGITECH G110 G-keys Keypad: device is a keyboard
[    19.535] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event22)
[    19.535] (**) Gaming Keyboard G110: Applying InputClass "libinput keyboard catchall"
[    19.535] (**) Gaming Keyboard G110: Applying InputClass "system-keyboard"
[    19.535] (II) Using input driver 'libinput' for 'Gaming Keyboard G110'
[    19.535] (**) Gaming Keyboard G110: always reports core events
[    19.535] (**) Option "Device" "/dev/input/event22"
[    19.535] (**) Option "_source" "server/udev"
[    19.536] (II) event22 - Gaming Keyboard G110: is tagged by udev as: Keyboard
[    19.536] (II) event22 - Gaming Keyboard G110: device is a keyboard
[    19.537] (II) event22 - Gaming Keyboard G110: device removed
[    19.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.0/0003:046D:C22A.0004/input/input25/event22"
[    19.572] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[    19.572] (**) Option "xkb_model" "pc105"
[    19.572] (**) Option "xkb_layout" "hr"
[    19.573] (II) event22 - Gaming Keyboard G110: is tagged by udev as: Keyboard
[    19.573] (II) event22 - Gaming Keyboard G110: device is a keyboard
[    19.573] (II) config/udev: Adding input device Gaming Keyboard G110 Consumer Control (/dev/input/event23)
[    19.573] (**) Gaming Keyboard G110 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    19.573] (**) Gaming Keyboard G110 Consumer Control: Applying InputClass "system-keyboard"
[    19.573] (II) Using input driver 'libinput' for 'Gaming Keyboard G110 Consumer Control'
[    19.573] (**) Gaming Keyboard G110 Consumer Control: always reports core events
[    19.573] (**) Option "Device" "/dev/input/event23"
[    19.573] (**) Option "_source" "server/udev"
[    19.574] (II) event23 - Gaming Keyboard G110 Consumer Control: is tagged by udev as: Keyboard
[    19.574] (II) event23 - Gaming Keyboard G110 Consumer Control: device is a keyboard
[    19.574] (II) event23 - Gaming Keyboard G110 Consumer Control: device removed
[    19.595] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.3/3-1.8.3:1.1/0003:046D:C22A.0005/input/input26/event23"
[    19.595] (II) XINPUT: Adding extended input device "Gaming Keyboard G110 Consumer Control" (type: KEYBOARD, id 13)
[    19.595] (**) Option "xkb_model" "pc105"
[    19.595] (**) Option "xkb_layout" "hr"
[    19.596] (II) event23 - Gaming Keyboard G110 Consumer Control: is tagged by udev as: Keyboard
[    19.596] (II) event23 - Gaming Keyboard G110 Consumer Control: device is a keyboard
[    19.596] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[    19.596] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    19.596] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[    19.596] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    19.596] (**) Eee PC WMI hotkeys: always reports core events
[    19.596] (**) Option "Device" "/dev/input/event2"
[    19.596] (**) Option "_source" "server/udev"
[    19.597] (II) event2  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    19.597] (II) event2  - Eee PC WMI hotkeys: device is a keyboard
[    19.597] (II) event2  - Eee PC WMI hotkeys: device removed
[    19.632] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input2/event2"
[    19.632] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[    19.632] (**) Option "xkb_model" "pc105"
[    19.632] (**) Option "xkb_layout" "hr"
[    19.633] (II) event2  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    19.633] (II) event2  - Eee PC WMI hotkeys: device is a keyboard
[    19.637] (**) Logitech G500 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    19.637] (**) Logitech G500 Consumer Control: Applying InputClass "system-keyboard"
[    19.637] (II) Using input driver 'libinput' for 'Logitech G500 Consumer Control'
[    19.637] (**) Logitech G500 Consumer Control: always reports core events
[    19.637] (**) Option "Device" "/dev/input/event20"
[    19.637] (**) Option "_source" "_driver/libinput"
[    19.637] (II) libinput: Logitech G500 Consumer Control: is a virtual subdevice
[    19.637] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.1/0003:046D:C068.0002/input/input20/event20"
[    19.637] (II) XINPUT: Adding extended input device "Logitech G500 Consumer Control" (type: KEYBOARD, id 15)
[    19.637] (**) Option "xkb_model" "pc105"
[    19.637] (**) Option "xkb_layout" "hr"
[    19.669] (EE) Failed to open authorization file "/var/run/sddm/{69e72015-8f62-4ede-8b35-6ac1d8c53966}": No such file or directory
[    33.182] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): connected
[    33.182] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): Internal TMDS
[    33.182] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): 330.0 MHz maximum pixel clock
[    33.182] (--) NVIDIA(GPU-0): 
[    33.182] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    33.182] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    33.183] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    33.183] (--) NVIDIA(GPU-0): 
[    33.183] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    33.183] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    33.183] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    33.183] (--) NVIDIA(GPU-0): 
[    33.183] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    33.183] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    33.183] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    33.183] (--) NVIDIA(GPU-0): 
[    41.073] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): connected
[    41.073] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): Internal TMDS
[    41.073] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): 330.0 MHz maximum pixel clock
[    41.073] (--) NVIDIA(GPU-0): 
[    41.073] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    41.073] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    41.073] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    41.073] (--) NVIDIA(GPU-0): 
[    41.073] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    41.073] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    41.073] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    41.073] (--) NVIDIA(GPU-0): 
[    41.073] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    41.073] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    41.073] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    41.073] (--) NVIDIA(GPU-0): 
[   107.873] (II) event1  - Power Button: device removed
[   107.906] (II) event0  - Power Button: device removed
[   107.933] (II) event18 - Logitech G500: device removed
[   107.986] (II) event19 - Logitech G500 Keyboard: device removed
[   108.012] (II) event21 - LOGITECH G110 G-keys Keypad: device removed
[   108.039] (II) event22 - Gaming Keyboard G110: device removed
[   108.065] (II) event23 - Gaming Keyboard G110 Consumer Control: device removed
[   108.092] (II) event2  - Eee PC WMI hotkeys: device removed
[   108.119] (II) event20 - Logitech G500 Consumer Control: device removed
[   110.899] (II) Open ACPI successful (/var/run/acpid.socket)
[   110.929] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): connected
[   110.929] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): Internal TMDS
[   110.929] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): 330.0 MHz maximum pixel clock
[   110.929] (--) NVIDIA(GPU-0): 
[   110.929] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   110.929] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   110.929] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   110.929] (--) NVIDIA(GPU-0): 
[   110.929] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   110.929] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   110.929] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   110.929] (--) NVIDIA(GPU-0): 
[   110.929] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   110.929] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   110.929] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   110.929] (--) NVIDIA(GPU-0): 
[   110.947] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[   111.015] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   111.015] (II) event1  - Power Button: device is a keyboard
[   111.016] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   111.016] (II) event0  - Power Button: device is a keyboard
[   111.072] (II) event18 - Logitech G500: is tagged by udev as: Mouse
[   111.073] (II) event18 - Logitech G500: device set to 1600 DPI
[   111.073] (II) event18 - Logitech G500: device is a pointer
[   111.074] (II) event19 - Logitech G500 Keyboard: is tagged by udev as: Keyboard
[   111.074] (II) event19 - Logitech G500 Keyboard: device is a keyboard
[   111.075] (II) event20 - Logitech G500 Consumer Control: is tagged by udev as: Keyboard
[   111.075] (II) event20 - Logitech G500 Consumer Control: device is a keyboard
[   111.076] (II) event21 - LOGITECH G110 G-keys Keypad: is tagged by udev as: Keyboard
[   111.076] (II) event21 - LOGITECH G110 G-keys Keypad: device is a keyboard
[   111.077] (II) event22 - Gaming Keyboard G110: is tagged by udev as: Keyboard
[   111.077] (II) event22 - Gaming Keyboard G110: device is a keyboard
[   111.078] (II) event23 - Gaming Keyboard G110 Consumer Control: is tagged by udev as: Keyboard
[   111.078] (II) event23 - Gaming Keyboard G110 Consumer Control: device is a keyboard
[   111.078] (II) event2  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   111.079] (II) event2  - Eee PC WMI hotkeys: device is a keyboard
[   113.075] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): connected
[   113.075] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): Internal TMDS
[   113.075] (--) NVIDIA(GPU-0): Samsung S23B300 (DFP-0): 330.0 MHz maximum pixel clock
[   113.075] (--) NVIDIA(GPU-0): 
[   113.075] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   113.075] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   113.075] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   113.075] (--) NVIDIA(GPU-0): 
[   113.075] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   113.075] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   113.075] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   113.075] (--) NVIDIA(GPU-0): 
[   113.075] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   113.075] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   113.075] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   113.075] (--) NVIDIA(GPU-0):

Re: Mouse clicks not recognized upon startup

Reply #3 – 11 October 2020, 15:08:15

Small update that wasn't in the log before but maybe worth noting:

Code: [Select]

[  2500.855] (EE) event18 - Logitech G500: client bug: event processing lagging behind by 24ms, your system is too slow
[  2539.008] (EE) event22 - Gaming Keyboard G110: client bug: event processing lagging behind by 26ms, your system is too slow
[  2600.320] (EE) event18 - Logitech G500: client bug: event processing lagging behind by 11ms, your system is too slow
[  2798.063] (EE) event18 - Logitech G500: client bug: event processing lagging behind by 14ms, your system is too slow
[  2816.795] (EE) event18 - Logitech G500: client bug: event processing lagging behind by 14ms, your system is too slow

These lines are starting to appear in the log after some regular usage.
I have an i7 and I'm pretty sure my system is not that slow, even with those vulnerability mitigations.
Cursory internet search suggests this may be connected to libinput or the compositor?

Re: Mouse clicks not recognized upon startup

Reply #4 – 11 October 2020, 21:20:20

do simple test... works your mice under some of our ISO? If you boot to our ISO, works all ok? If yes, some problem with your setting

Re: Mouse clicks not recognized upon startup

Reply #5 – 14 October 2020, 12:00:05

I've managed to fix this kinda.
Yesterday I've changed the compositor from OpenGl 2 to XRender, and today, when everything loaded after booting, the mouse clicks were working just fine.
Left/right mouse click works, hovering over icons highlights and tooltips/pop-ups are showing up as well.
Albeit, at the cost of some minor tearing in Chromium.

Soo this is actually a compositor issue, or more likely, a nvidia driver issue, I take it?

EDIT:
Updating Plasma to 5.20 fixed the issue properly, now I can use OpenGL2 as the compositor and the issue is gone.