Skip to main content ↑ ↓
Topic: OBS Studio and OnlyOffice don't start after installation through Software (Read 1574 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

OBS Studio and OnlyOffice don't start after installation through Software

Hello,
I installed OBS Studio, Barrier and OnlyOffice through "Software App" GUI, but it doesn't start. I have installed encrypted GUI Gnome version of Artix and it is up to date:
artix-gnome-openrc-20200704-x86_64.iso
https://iso.artixlinux.org/testing-isos.php
Does apps from "Software Gui" are installed in a different way than "pacman"?
What could be the reason?

Barrier I was able to install by pacman -S barrier and it seems to be working.
With OBS I installed through pacman but it says GPU may not be supported. I have integrated Intel® HD Graphics which seems to be supported.
OnlyOffice I try install by "yay -S onlyoffce" but it still no luck.
 

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #1 –
Have you tried yay -S onlyoffice-bin?

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #2 –
Also, most people recommend libreoffice. It is in the official repos.

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #3 –
Yes I try "yay -S onlyoffice-bin". it is still doesn't start.
"Only office" has better compatibility with .xlsx files.

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #4 –
Does it give an error message when you start onlyoffice from the command line?

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #6 –
Quote from: svdm – on
Does it give an error message when you start onlyoffice from the command line?
Yes.
From command line Tab fills such a name: onlyoffice-desktopeditors
It gives error:
This application failed to start because it could not find or load the Qt platfrom plugin "wayland" in "". Available platform plugins are: linuxfb, minimal, offscreen, vnc, xcb.
Reinstalling the application may fix this problem.

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #7 –
I don't know whether this will fix your problem, but installing qt5-wayland and running "onlyoffice-desktopeditors -platform wayland" should make that error go away.

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #8 –
Quote from: svdm – on
I don't know whether this will fix your problem, but installing qt5-wayland and running "onlyoffice-desktopeditors -platform wayland" should make that error go away.
I've installed qt5-wayland and run "onlyoffice-desktopeditors -platform wayland" and error is still the same

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #9 –
Hi, try with QT_QPA_PLATFORM=xcb

Qt and wayland is not there yet.

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #10 –
Quote from: linuxer – on
Hi, try with QT_QPA_PLATFORM=xcb

Qt and wayland is not there yet.
Thanx for tip:
I've done:
 QT_QPA_PLATFORM=xcb
and
onlyoffice-desktopeditors& -platform xcb
and it works!

1. What is that xcb? Does it mean that OnlyOffice works on older Xorg engine?
2. QT_QPA_PLATFORM=xcb -> does it says that all my GUI is now Xorg?

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #11 –
I have "glxinfo" with:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Gaphics (ILK)
OpenGL version string: 2.1 Mesa 20.3.4
OpenGL shading language version string: 1.20

From project page:
https://projectobs.com/en/download/
OpenGL 3.2 or later is required to use OBS Studio on Linux
Do you think it will be possible to run OBS Studio?

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #12 –
OBS
Quote from: Zfkt – on
I have "glxinfo" with:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Gaphics (ILK)
OpenGL version string: 2.1 Mesa 20.3.4
OpenGL shading language version string: 1.20

From project page:
https://projectobs.com/en/download/
OpenGL 3.2 or later is required to use OBS Studio on Linux
Do you think it will be possible to run OBS Studio?

I was able to start OBS with software rendering. My processor don't support necessary version:
LIBGL_ALWAYS_SOFTWARE=1 obs

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #13 –
Quote from: Zfkt – on
Thanx for tip:
I've done:
 QT_QPA_PLATFORM=xcb
and
onlyoffice-desktopeditors& -platform xcb
and it works!

1. What is that xcb? Does it mean that OnlyOffice works on older Xorg engine?
2. QT_QPA_PLATFORM=xcb -> does it says that all my GUI is now Xorg?

Nice.

QT_QPA_PLATFORM=xcb forces the Qt apps to work as X11 instead of wayland

Have fun
 

Re: OBS Studio and OnlyOffice don't start after installation through Software

Reply #14 –
Quote from: linuxer – on
Nice.

QT_QPA_PLATFORM=xcb forces the Qt apps to work as X11 instead of wayland

Have fun

There is something confusing with this parameters for me.
I logged in into "Gnome on Xorg" at this installation and I still have to put this parameter:
"onlyoffice-desktopeditors& -platform xcb"
to start application. It doesn't work out of the box.
Deos it mean that App is download and installed specifically for given Xserver?