I have tried modesetting driver, but no difference and xf86-video-intel is recommended for my iGPU Intel HD Graphics 3000 sandy bridges gen6. All the drivers make Firefox way longer to load, even simple xfce4-terminal take around 5 seconds to load, not only that but rendering in firefox is also way slower (example: rendering hanging, cursor recognizing a button that is not there)
I use artix openrc, Is there any rc services I need to add?
rc-update:
acpid | default
agetty.tty1 | default
agetty.tty2 | default
agetty.tty3 | default
agetty.tty4 | default
agetty.tty5 | default
agetty.tty6 | default
binfmt | boot
bootmisc | boot
cgroups | sysinit
dbus | default
devfs | sysinit
dhcpcd | default
dmesg | sysinit
elogind | boot
fsck | boot
hostname | boot
hwclock | boot
keymaps | boot
killprocs | shutdown
kmod-static-nodes | sysinit
local | default nonetwork
localmount | boot
loopback | boot
modules | boot
mount-ro | shutdown
mtab | boot
net.lo | boot
netmount | default
opensysusers | boot
opentmpfiles-dev | sysinit
opentmpfiles-setup | boot
procfs | boot
root | boot
save-keymaps | boot
save-termencoding | boot
savecache | shutdown
seedrng | boot
swap | boot
sysctl | boot
sysfs | sysinit
termencoding | boot
udev | sysinit
udev-trigger | sysinit
xorg log
[ 25.829]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 25.833] Current Operating System: Linux linuz 6.4.3-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Tue, 11 Jul 2023 12:23:12 +0000 x86_64
[ 25.833] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=83887f16-c35a-4487-a847-84c7aa16fe04 rw loglevel=4 nowatchdog nmi_watchdog=0 mitigations=off
[ 25.836]
[ 25.840] Current version of pixman: 0.42.2
[ 25.843] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.843] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.855] (==) Log file: "/home/tom/.local/share/xorg/Xorg.0.log", Time: Thu Jul 13 15:32:52 2023
[ 25.955] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.958] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.996] (==) No Layout section. Using the first Screen section.
[ 25.996] (==) No screen section available. Using defaults.
[ 25.996] (**) |-->Screen "Default Screen Section" (0)
[ 25.996] (**) | |-->Monitor "<default monitor>"
[ 25.997] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 25.997] (**) | |-->Device "Intel HD Graphics"
[ 25.997] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.997] (==) Automatically adding devices
[ 25.997] (==) Automatically enabling devices
[ 25.997] (==) Automatically adding GPU devices
[ 25.997] (==) Automatically binding GPU devices
[ 25.997] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 26.041] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 26.041] Entry deleted from font path.
[ 26.041] (==) FontPath set to:
[ 26.041] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.041] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.041] (II) Module ABI versions:
[ 26.041] X.Org ANSI C Emulation: 0.4
[ 26.041] X.Org Video Driver: 25.2
[ 26.041] X.Org XInput driver : 24.4
[ 26.041] X.Org Server Extension : 10.0
[ 26.043] (++) using VT number 1
[ 26.047] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 26.049] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.049] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 26.050] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 26.056] (--) PCI:*(0@0:2:0) 8086:0126:17aa:3975 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 26.056] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26.056] (II) LoadModule: "glx"
[ 26.057] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.167] (II) Module glx: vendor="X.Org Foundation"
[ 26.168] compiled for 1.21.1.8, module version = 1.0.0
[ 26.168] ABI class: X.Org Server Extension, version 10.0
[ 26.168] (II) LoadModule: "intel"
[ 26.189] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 26.256] (II) Module intel: vendor="X.Org Foundation"
[ 26.256] compiled for 1.21.1.7, module version = 2.99.917
[ 26.256] Module class: X.Org Video Driver
[ 26.256] ABI class: X.Org Video Driver, version 25.2
[ 26.256] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 26.256] (II) intel: Driver for Intel(R) HD Graphics
[ 26.256] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 26.256] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 26.257] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 26.266] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 26.266] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[ 26.268] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 26.271] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 26.271] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 26.271] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.271] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 26.271] (==) intel(0): RGB weight 888
[ 26.271] (==) intel(0): Default visual is TrueColor
[ 26.271] (**) intel(0): Option "SwapbuffersWait" "true"
[ 26.271] (**) intel(0): Option "TripleBuffer" "true"
[ 26.271] (**) intel(0): Option "TearFree" "false"
[ 26.272] (II) intel(0): Output LVDS1 has no monitor section
[ 26.297] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 26.298] (II) intel(0): Enabled output LVDS1
[ 26.298] (II) intel(0): Output VGA1 has no monitor section
[ 26.298] (II) intel(0): Enabled output VGA1
[ 26.298] (II) intel(0): Output HDMI1 has no monitor section
[ 26.299] (II) intel(0): Enabled output HDMI1
[ 26.299] (II) intel(0): Output DP1 has no monitor section
[ 26.299] (II) intel(0): Enabled output DP1
[ 26.299] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 26.299] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 26.299] (II) intel(0): Enabled output VIRTUAL1
[ 26.299] (--) intel(0): Output LVDS1 using initial mode 1280x1024 on pipe 0
[ 26.299] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[ 26.299] (**) intel(0): TearFree disabled
[ 26.299] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 26.300] (==) intel(0): DPI set to (96, 96)
[ 26.300] (II) Loading sub module "dri3"
[ 26.300] (II) LoadModule: "dri3"
[ 26.300] (II) Module "dri3" already built-in
[ 26.300] (II) Loading sub module "dri2"
[ 26.300] (II) LoadModule: "dri2"
[ 26.300] (II) Module "dri2" already built-in
[ 26.300] (II) Loading sub module "present"
[ 26.300] (II) LoadModule: "present"
[ 26.300] (II) Module "present" already built-in
[ 26.385] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 26.385] (==) intel(0): Backing store enabled
[ 26.385] (==) intel(0): Silken mouse enabled
[ 26.385] (II) intel(0): HW Cursor enabled
[ 26.414] (==) intel(0): DPMS enabled
[ 26.414] (==) intel(0): Display hotplug detection enabled
[ 26.420] (II) intel(0): [DRI2] Setup complete
[ 26.420] (II) intel(0): [DRI2] DRI driver: i965
[ 26.420] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 26.420] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 26.420] (II) intel(0): hardware support for Present enabled
[ 26.420] (II) Initializing extension Generic Event Extension
[ 26.420] (II) Initializing extension SHAPE
[ 26.421] (II) Initializing extension MIT-SHM
[ 26.421] (II) Initializing extension XInputExtension
[ 26.423] (II) Initializing extension XTEST
[ 26.423] (II) Initializing extension BIG-REQUESTS
[ 26.423] (II) Initializing extension SYNC
[ 26.424] (II) Initializing extension XKEYBOARD
[ 26.424] (II) Initializing extension XC-MISC
[ 26.425] (II) Initializing extension SECURITY
[ 26.425] (II) Initializing extension XFIXES
[ 26.425] (II) Initializing extension RENDER
[ 26.426] (II) Initializing extension RANDR
[ 26.426] (II) Initializing extension COMPOSITE
[ 26.427] (II) Initializing extension DAMAGE
[ 26.427] (II) Initializing extension MIT-SCREEN-SAVER
[ 26.428] (II) Initializing extension DOUBLE-BUFFER
[ 26.428] (II) Initializing extension RECORD
[ 26.428] (II) Initializing extension DPMS
[ 26.429] (II) Initializing extension Present
[ 26.429] (II) Initializing extension DRI3
[ 26.429] (II) Initializing extension X-Resource
[ 26.430] (II) Initializing extension XVideo
[ 26.430] (II) Initializing extension XVideo-MotionCompensation
[ 26.430] (II) Initializing extension GLX
[ 26.446] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 26.446] (EE) AIGLX error: unable to load driver i965
[ 30.137] (II) IGLX: Loaded and initialized swrast
[ 30.137] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 30.137] (II) Initializing extension XFree86-VidModeExtension
[ 30.138] (II) Initializing extension XFree86-DGA
[ 30.138] (II) Initializing extension XFree86-DRI
[ 30.138] (II) Initializing extension DRI2
[ 30.189] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 30.200] (II) intel(0): switch to mode [email protected] on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 30.201] (II) intel(0): Setting screen physical size to 508 x 285
[ 30.964] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.964] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 30.964] (II) LoadModule: "libinput"
[ 30.964] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 31.009] (II) Module libinput: vendor="X.Org Foundation"
[ 31.009] compiled for 1.21.1.8, module version = 1.3.0
[ 31.009] Module class: X.Org XInput Driver
[ 31.009] ABI class: X.Org XInput driver, version 24.4
[ 31.010] (II) Using input driver 'libinput' for 'Power Button'
[ 31.011] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[ 31.011] (**) Power Button: always reports core events
[ 31.011] (**) Option "Device" "/dev/input/event3"
[ 31.093] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 31.093] (II) event3 - Power Button: device is a keyboard
[ 31.094] (II) event3 - Power Button: device removed
[ 31.094] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 31.094] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.097] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 31.097] (II) event3 - Power Button: device is a keyboard
[ 31.099] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 31.099] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 31.099] (II) Using input driver 'libinput' for 'Video Bus'
[ 31.101] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 28 paused 0
[ 31.101] (**) Video Bus: always reports core events
[ 31.101] (**) Option "Device" "/dev/input/event11"
[ 31.104] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 31.105] (II) event11 - Video Bus: device is a keyboard
[ 31.105] (II) event11 - Video Bus: device removed
[ 31.105] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event11"
[ 31.105] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 31.109] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 31.109] (II) event11 - Video Bus: device is a keyboard
[ 31.111] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.111] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 31.111] (II) Using input driver 'libinput' for 'Power Button'
[ 31.113] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[ 31.113] (**) Power Button: always reports core events
[ 31.113] (**) Option "Device" "/dev/input/event0"
[ 31.117] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 31.117] (II) event0 - Power Button: device is a keyboard
[ 31.118] (II) event0 - Power Button: device removed
[ 31.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 31.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 31.122] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 31.122] (II) event0 - Power Button: device is a keyboard
[ 31.124] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 31.124] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 31.125] (II) Using input driver 'libinput' for 'Sleep Button'
[ 31.126] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[ 31.126] (**) Sleep Button: always reports core events
[ 31.126] (**) Option "Device" "/dev/input/event1"
[ 31.130] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 31.130] (II) event1 - Sleep Button: device is a keyboard
[ 31.131] (II) event1 - Sleep Button: device removed
[ 31.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1/event1"
[ 31.131] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 31.135] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 31.135] (II) event1 - Sleep Button: device is a keyboard
[ 31.137] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 31.137] (II) No input driver specified, ignoring this device.
[ 31.137] (II) This device may have been added with another device file.
[ 31.140] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 31.140] (II) No input driver specified, ignoring this device.
[ 31.140] (II) This device may have been added with another device file.
[ 31.141] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 31.141] (II) No input driver specified, ignoring this device.
[ 31.141] (II) This device may have been added with another device file.
[ 31.142] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[ 31.142] (II) No input driver specified, ignoring this device.
[ 31.142] (II) This device may have been added with another device file.
[ 31.145] (II) config/udev: Adding input device Logitech Wireless Receiver Mouse (/dev/input/event4)
[ 31.145] (**) Logitech Wireless Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 31.145] (II) Using input driver 'libinput' for 'Logitech Wireless Receiver Mouse'
[ 31.198] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 31 paused 0
[ 31.198] (**) Logitech Wireless Receiver Mouse: always reports core events
[ 31.198] (**) Option "Device" "/dev/input/event4"
[ 31.203] (II) event4 - Logitech Wireless Receiver Mouse: is tagged by udev as: Mouse
[ 31.204] (II) event4 - Logitech Wireless Receiver Mouse: device is a pointer
[ 31.204] (II) event4 - Logitech Wireless Receiver Mouse: device removed
[ 31.205] (II) libinput: Logitech Wireless Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.205] (II) libinput: Logitech Wireless Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.205] (II) libinput: Logitech Wireless Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.205] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C542.0001/input/input4/event4"
[ 31.205] (II) XINPUT: Adding extended input device "Logitech Wireless Receiver Mouse" (type: MOUSE, id 10)
[ 31.205] (**) Option "AccelerationScheme" "none"
[ 31.205] (**) Logitech Wireless Receiver Mouse: (accel) selected scheme none/0
[ 31.205] (**) Logitech Wireless Receiver Mouse: (accel) acceleration factor: 2.000
[ 31.205] (**) Logitech Wireless Receiver Mouse: (accel) acceleration threshold: 4
[ 31.210] (II) event4 - Logitech Wireless Receiver Mouse: is tagged by udev as: Mouse
[ 31.210] (II) event4 - Logitech Wireless Receiver Mouse: device is a pointer
[ 31.213] (II) config/udev: Adding input device Logitech Wireless Receiver Mouse (/dev/input/mouse0)
[ 31.213] (II) No input driver specified, ignoring this device.
[ 31.213] (II) This device may have been added with another device file.
[ 31.215] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB (/dev/input/event5)
[ 31.215] (**) Kingston HyperX Alloy Core RGB: Applying InputClass "libinput keyboard catchall"
[ 31.215] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB'
[ 31.217] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[ 31.217] (**) Kingston HyperX Alloy Core RGB: always reports core events
[ 31.217] (**) Option "Device" "/dev/input/event5"
[ 31.222] (II) event5 - Kingston HyperX Alloy Core RGB: is tagged by udev as: Keyboard
[ 31.222] (II) event5 - Kingston HyperX Alloy Core RGB: device is a keyboard
[ 31.223] (II) event5 - Kingston HyperX Alloy Core RGB: device removed
[ 31.223] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0951:16DD.0002/input/input5/event5"
[ 31.224] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB" (type: KEYBOARD, id 11)
[ 31.228] (II) event5 - Kingston HyperX Alloy Core RGB: is tagged by udev as: Keyboard
[ 31.229] (II) event5 - Kingston HyperX Alloy Core RGB: device is a keyboard
[ 31.232] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB Mouse (/dev/input/event6)
[ 31.232] (**) Kingston HyperX Alloy Core RGB Mouse: Applying InputClass "libinput pointer catchall"
[ 31.232] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB Mouse'
[ 31.234] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 33 paused 0
[ 31.234] (**) Kingston HyperX Alloy Core RGB Mouse: always reports core events
[ 31.234] (**) Option "Device" "/dev/input/event6"
[ 31.239] (II) event6 - Kingston HyperX Alloy Core RGB Mouse: is tagged by udev as: Mouse
[ 31.239] (II) event6 - Kingston HyperX Alloy Core RGB Mouse: device is a pointer
[ 31.240] (II) event6 - Kingston HyperX Alloy Core RGB Mouse: device removed
[ 31.240] (II) libinput: Kingston HyperX Alloy Core RGB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.240] (II) libinput: Kingston HyperX Alloy Core RGB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.240] (II) libinput: Kingston HyperX Alloy Core RGB Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0951:16DD.0003/input/input6/event6"
[ 31.240] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB Mouse" (type: MOUSE, id 12)
[ 31.241] (**) Option "AccelerationScheme" "none"
[ 31.241] (**) Kingston HyperX Alloy Core RGB Mouse: (accel) selected scheme none/0
[ 31.241] (**) Kingston HyperX Alloy Core RGB Mouse: (accel) acceleration factor: 2.000
[ 31.241] (**) Kingston HyperX Alloy Core RGB Mouse: (accel) acceleration threshold: 4
[ 31.245] (II) event6 - Kingston HyperX Alloy Core RGB Mouse: is tagged by udev as: Mouse
[ 31.246] (II) event6 - Kingston HyperX Alloy Core RGB Mouse: device is a pointer
[ 31.249] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB Mouse (/dev/input/mouse1)
[ 31.249] (II) No input driver specified, ignoring this device.
[ 31.249] (II) This device may have been added with another device file.
[ 31.251] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB System Control (/dev/input/event7)
[ 31.251] (**) Kingston HyperX Alloy Core RGB System Control: Applying InputClass "libinput keyboard catchall"
[ 31.251] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB System Control'
[ 31.253] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 34 paused 0
[ 31.253] (**) Kingston HyperX Alloy Core RGB System Control: always reports core events
[ 31.253] (**) Option "Device" "/dev/input/event7"
[ 31.257] (II) event7 - Kingston HyperX Alloy Core RGB System Control: is tagged by udev as: Keyboard
[ 31.257] (II) event7 - Kingston HyperX Alloy Core RGB System Control: device is a keyboard
[ 31.258] (II) event7 - Kingston HyperX Alloy Core RGB System Control: device removed
[ 31.258] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0951:16DD.0003/input/input7/event7"
[ 31.258] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB System Control" (type: KEYBOARD, id 13)
[ 31.262] (II) event7 - Kingston HyperX Alloy Core RGB System Control: is tagged by udev as: Keyboard
[ 31.263] (II) event7 - Kingston HyperX Alloy Core RGB System Control: device is a keyboard
[ 31.265] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB Consumer Control (/dev/input/event8)
[ 31.265] (**) Kingston HyperX Alloy Core RGB Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31.265] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB Consumer Control'
[ 31.267] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 35 paused 0
[ 31.267] (**) Kingston HyperX Alloy Core RGB Consumer Control: always reports core events
[ 31.267] (**) Option "Device" "/dev/input/event8"
[ 31.272] (II) event8 - Kingston HyperX Alloy Core RGB Consumer Control: is tagged by udev as: Keyboard
[ 31.272] (II) event8 - Kingston HyperX Alloy Core RGB Consumer Control: device is a keyboard
[ 31.272] (II) event8 - Kingston HyperX Alloy Core RGB Consumer Control: device removed
[ 31.273] (II) libinput: Kingston HyperX Alloy Core RGB Consumer Control: needs a virtual subdevice
[ 31.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0951:16DD.0003/input/input8/event8"
[ 31.273] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB Consumer Control" (type: MOUSE, id 14)
[ 31.273] (**) Option "AccelerationScheme" "none"
[ 31.273] (**) Kingston HyperX Alloy Core RGB Consumer Control: (accel) selected scheme none/0
[ 31.273] (**) Kingston HyperX Alloy Core RGB Consumer Control: (accel) acceleration factor: 2.000
[ 31.273] (**) Kingston HyperX Alloy Core RGB Consumer Control: (accel) acceleration threshold: 4
[ 31.277] (II) event8 - Kingston HyperX Alloy Core RGB Consumer Control: is tagged by udev as: Keyboard
[ 31.277] (II) event8 - Kingston HyperX Alloy Core RGB Consumer Control: device is a keyboard
[ 31.280] (II) config/udev: Adding input device Kingston HyperX Alloy Core RGB Keyboard (/dev/input/event9)
[ 31.280] (**) Kingston HyperX Alloy Core RGB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 31.280] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB Keyboard'
[ 31.282] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 36 paused 0
[ 31.282] (**) Kingston HyperX Alloy Core RGB Keyboard: always reports core events
[ 31.282] (**) Option "Device" "/dev/input/event9"
[ 31.283] (II) event9 - Kingston HyperX Alloy Core RGB Keyboard: is tagged by udev as: Keyboard
[ 31.283] (II) event9 - Kingston HyperX Alloy Core RGB Keyboard: device is a keyboard
[ 31.284] (II) event9 - Kingston HyperX Alloy Core RGB Keyboard: device removed
[ 31.284] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0951:16DD.0003/input/input9/event9"
[ 31.284] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB Keyboard" (type: KEYBOARD, id 15)
[ 31.285] (II) event9 - Kingston HyperX Alloy Core RGB Keyboard: is tagged by udev as: Keyboard
[ 31.286] (II) event9 - Kingston HyperX Alloy Core RGB Keyboard: device is a keyboard
[ 31.288] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event13)
[ 31.288] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 31.288] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 31.289] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 37 paused 0
[ 31.289] (**) Ideapad extra buttons: always reports core events
[ 31.289] (**) Option "Device" "/dev/input/event13"
[ 31.291] (II) event13 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 31.292] (II) event13 - Ideapad extra buttons: device is a keyboard
[ 31.292] (II) event13 - Ideapad extra buttons: device removed
[ 31.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input14/event13"
[ 31.292] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 16)
[ 31.295] (II) event13 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 31.295] (II) event13 - Ideapad extra buttons: device is a keyboard
[ 31.297] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event10)
[ 31.297] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 31.297] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 31.298] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 38 paused 0
[ 31.298] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.298] (**) Option "Device" "/dev/input/event10"
[ 31.301] (II) event10 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 31.301] (II) event10 - AT Translated Set 2 keyboard: device is a keyboard
[ 31.304] (II) event10 - AT Translated Set 2 keyboard: device removed
[ 31.304] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input10/event10"
[ 31.304] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[ 31.306] (II) event10 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 31.307] (II) event10 - AT Translated Set 2 keyboard: device is a keyboard
[ 31.311] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 31.311] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 31.311] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 31.312] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 39 paused 0
[ 31.312] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 31.312] (**) Option "Device" "/dev/input/event14"
[ 31.314] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 31.318] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 31.318] (II) event14 - SynPS/2 Synaptics TouchPad: device removed
[ 31.318] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.318] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.318] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 31.319] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event14"
[ 31.319] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[ 31.321] (**) Option "AccelerationScheme" "none"
[ 31.321] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 31.321] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 31.321] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 31.322] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 31.325] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 31.327] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 31.327] (II) No input driver specified, ignoring this device.
[ 31.327] (II) This device may have been added with another device file.
[ 31.327] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 31.327] (II) No input driver specified, ignoring this device.
[ 31.327] (II) This device may have been added with another device file.
[ 31.352] (**) Kingston HyperX Alloy Core RGB Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 31.352] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Core RGB Consumer Control'
[ 31.352] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[ 31.352] (**) Kingston HyperX Alloy Core RGB Consumer Control: always reports core events
[ 31.352] (**) Option "Device" "/dev/input/event8"
[ 31.352] (II) libinput: Kingston HyperX Alloy Core RGB Consumer Control: is a virtual subdevice
[ 31.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:0951:16DD.0003/input/input8/event8"
[ 31.352] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Core RGB Consumer Control" (type: KEYBOARD, id 19)
Topic: [SOLVED] Intel is very slow? (Read 667 times)
previous topic - next topic
