Skip to main content ↑ ↓
Topic solved
This topic has been marked as solved and requires no further attention.
Topic: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy (Read 1134 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

recently switched to suite66 and right about when "modules-kernel: info: starts..." comes up, it "freezes" and the log at /run/66/log/0/current gets spammed with the line in the title. Funnily enough, I can switch to tty12 just fine and start X, in fact, I am posting from that X session right now.
"Full" log below:
2021-07-20 12:50:27.848137887  [Initiate db of tree boot...]
2021-07-20 12:50:27.877928629  [Start db services of tree boot...]
2021-07-20 12:50:27.897267312  mount-proc: info: starts...
2021-07-20 12:50:27.897588693  system-hostname: info: starts...
2021-07-20 12:50:27.897794407  mount-tmp: info: starts...
2021-07-20 12:50:27.898000836  mount-run: info: starts...
2021-07-20 12:50:27.903469260  populate-run: info: starts...
2021-07-20 12:50:27.905189410  mount-sys: info: starts...
2021-07-20 12:50:27.910013030  populate-tmp: info: starts...
2021-07-20 12:50:27.910397129  mount-dev: info: starts...
2021-07-20 12:50:27.910620854  populate-sys: info: starts...
2021-07-20 12:50:27.924231046  populate-dev: info: starts...
2021-07-20 12:50:27.924566697  mount-cgroups: info: starts...
2021-07-20 12:50:27.925959603  mount-pts: info: starts...
2021-07-20 12:50:27.926163278  mount-shm: info: starts...
2021-07-20 12:50:27.963570942  system-random: info: starts...
2021-07-20 12:50:27.964062996  system-sysctl: info: starts...
2021-07-20 12:50:27.964315785  modules-kernel: info: starts...
2021-07-20 12:50:27.965428774  modules-system: info: starts...
2021-07-20 12:50:27.965811362  system-hwclock: info: starts...
2021-07-20 12:50:27.975153067  * Applying /usr/lib/sysctl.d/10-artix.conf ...
2021-07-20 12:50:27.975156821  fs.inotify.max_user_instances = 1024
2021-07-20 12:50:27.975158746  fs.inotify.max_user_watches = 524288
2021-07-20 12:50:27.975160807  * Applying /usr/lib/sysctl.d/60-libvirtd.conf ...
2021-07-20 12:50:27.975162528  fs.aio-max-nr = 1048576
2021-07-20 12:50:27.975174459  * Applying /etc/sysctl.d/99_magic_sysrq.conf ...
2021-07-20 12:50:27.975176451  kernel.sysrq = 1
2021-07-20 12:50:29.183512281  udevadm: info: starts...
2021-07-20 12:50:29.749673048  system-fontnkey: info: starts...
2021-07-20 12:50:29.804867086  system-fsck: info: starts...
2021-07-20 12:50:29.817999405  e2fsck: Cannot continue, aborting.
2021-07-20 12:50:29.818002639 
2021-07-20 12:50:29.818003484 
2021-07-20 12:50:29.818310129  system-fsck: info: /dev/sdb3 is mounted.
2021-07-20 12:50:29.824108706  mount-fstab: info: starts...
2021-07-20 12:50:30.748366232  mount-rw: info: starts...
2021-07-20 12:50:30.756977285  mount-netfs: info: starts...
2021-07-20 12:50:30.757200498  local-loop: info: starts...
2021-07-20 12:50:30.757441843  mount-swap: info: starts...
2021-07-20 12:50:30.757685406  local-sysusers: info: starts...
2021-07-20 12:50:30.759123714  local-locale: info: starts...
2021-07-20 12:50:30.759400936  local-tmpfiles: info: starts...
2021-07-20 12:50:30.759646071  local-time: info: starts...
2021-07-20 12:50:30.761627507  local-sethostname: info: starts...
2021-07-20 12:50:30.761881756  local-authfiles: info: starts...
2021-07-20 12:50:30.792501220  local-dmesg: info: starts...
2021-07-20 12:50:30.802879503  all-Runtime: info: starts...
2021-07-20 12:50:30.889112676  mount-tmp: info: starts...
2021-07-20 12:50:30.889316203  mount-run: info: starts...
2021-07-20 12:50:30.892824199  system-hostname: info: starts...
2021-07-20 12:50:30.893695344  mount-proc: info: starts...
2021-07-20 12:50:30.901470430  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:30.908734766  populate-tmp: info: starts...
2021-07-20 12:50:30.911985749  populate-run: info: starts...
2021-07-20 12:50:30.913012620  mount-sys: info: starts...
2021-07-20 12:50:30.920742132  mount-dev: info: starts...
2021-07-20 12:50:30.928321281  populate-sys: info: starts...
2021-07-20 12:50:30.943552524  populate-dev: info: starts...
2021-07-20 12:50:30.950818645  mount-cgroups: info: starts...
2021-07-20 12:50:30.958186989  mount-shm: info: starts...
2021-07-20 12:50:30.965551885  mount-pts: info: starts...
2021-07-20 12:50:30.977939929  modules-kernel: info: starts...
2021-07-20 12:50:31.891155218  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:32.892103051  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:33.892767074  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:34.893763109  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:35.894313091  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:36.895189884  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:37.895396260  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:38.896398773  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:39.896642884  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:40.897838321  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2021-07-20 12:50:41.898814329  s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy
2

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #1 –
What does your tree look like?
sudo 66-intree ?

Out of curiosity does rm-ing the lock file and restarting help

Yep anytime there is a boot issue with 66 tty12 is available atleast until the issue can be fixed

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #2 –
Here is the output for 66-intree

$ sudo 66-intree
Name         : boot
Initialized  : yes
Enabled      : no
Starts after : None
Current      : no
Allowed      : root
Symlinks     : svc->source db->source
Contents     : tty-earlier@tty12 system-hostname mount-run populate-run mount-tmp
               populate-tmp mount-proc mount-sys populate-sys mount-dev mount-pts
               mount-shm populate-dev mount-cgroups 00 all-Mount system-hwclock
               modules-kernel system-random modules-system system-sysctl udevd-log
               udevd udevadm system-fontnkey system-fsck mount-fstab all-System
               mount-rw mount-swap mount-netfs local-loop local-sethostname
               local-time local-authfiles local-tmpfiles local-sysusers local-dmesg
               local-locale all-Local all-Runtime All tty-rc@tty3 tty-rc@tty2
               tty-rc@tty1 boot@system

Name         : default
Initialized  : yes
Enabled      : yes
Starts after : None
Current      : yes
Allowed      : root
Symlinks     : svc->backup db->source
Contents     : wpa_supplicant-log hdparm-log cronie-log dhcpcd-log dhcpcd acpid-log
               hdparm openvpn-log wpa_supplicant acpid openvpn cronie mount-proc
               mount-sys mount-dev mount-pts mount-cgroups sshd-log sshd dbus-log
               dbus elogind-log elogind mount-tmp alsa NetworkManager-log
               NetworkManager mount-run connmand-log connmand syslog-ng-log
               virtlockd-log populate-run syslog-ng haveged-log virtlockd-socket
               mdadm-log mdadm system-hostname populate-tmp populate-sys mount-shm
               populate-dev 00 modules-kernel udevd-log udevd cupsd-log libvirtd-log
               virtlockd haveged virtlogd-log virtlogd libvirtd cupsd


And yeah, I just deleted the lock file and it came back right away and the following message appeared in the log
2021-07-20 14:55:00.165155701  66-all: fatal: unable to start atomic services list
2021-07-20 14:55:00.166738628  all-Runtime: fatal: crashed! -- Your machine is operational
but some runtime service failed to start correctly. Please see the complete boot log at /run/66/log/0/current for further information.

tty1 now gives me the option to log in but I will restart first. brb

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #3 –
Just restarted and I got the same error as before. Only deleting the lock file allows me to log in, although, as that log said, some runtime service failed to start correctly.

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #4 –
You have 00 duplicated in default, while populate-tmp is in default instead of boot. It seems that your tree is not set up correctly. Here's mine:
Code: [Select]
Name         : boot
Initialized  : yes
Enabled      : no
Starts after : None
Current      : no
Allowed      : root
Symlinks     : svc->source db->source
Contents     : tty-earlier@tty12 system-hostname mount-run 
populate-run mount-tmp populate-tmp mount-proc mount-sys populate-sys 
mount-dev mount-pts mount-shm populate-dev mount-cgroups 00 all-Mount 
modules-kernel udevd-log udevd udevadm devices-lvm system-Devices 
system-fontnkey system-fsck mount-fstab system-hwclock system-random 
modules-system system-sysctl all-System mount-rw mount-netfs 
mount-swap local-loop local-sethostname local-time local-authfiles 
local-tmpfiles local-sysusers local-rc local-dmesg local-locale 
all-Local all-Runtime All tty-rc@tty1 tty-rc@tty2 tty-rc@tty4 
tty-rc@tty5 tty-rc@tty3 boot@system

Name         : default
Initialized  : yes
Enabled      : yes
Starts after : None
Current      : yes
Allowed      : root
Symlinks     : svc->source db->source
Contents     : acpid-log acpid dhcpcd-log dhcpcd chrony-log chrony 
transmission-log transmission atd-log atd syncthing-log syncthing 
cronie-log cronie connmand-log cupsd-log haveged-log haveged ufw 
rpcbind-log rpcbind dbus-log dbus colord-log colord apache-log 
lvm2-monitor syslog-ng-log syslog-ng cupsd apache lvm2-pvscan 
lvmpolld-log lvmpolld alsa connmand

Follow the guide here to set up 66 correctly: https://wiki.artixlinux.org/Main/Suite66

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #5 –
Yep you have boot related stuff also in default tree and should only be in boot

Re: s6-log: fatal: unable to lock /run/66/log/udevd/lock: Device or resource busy

Reply #6 –
Yeah, thanks. I think what happened is that I accidentally enabled udevd in the default tree while migrating from runit to 66. It all works flawlessly now.