Skip to main content
Topic: A new build server? (Read 3697 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

A new build server?

May it bring us many happy builds after it is stress tested tomorrow!  :0

Re: A new build server?

Reply #1
So i can only attach 4 at a time

Re: A new build server?

Reply #2
[artix@artix-pc ~]$ sudo inxi -Fxzmc0
Resuming in non X mode: xrandr not found. For package install advice run: inxi --recommends
System:    Host: artix-pc Kernel: 4.18.16-zen1-1-zen x86_64 bits: 64 gcc: 8.2.1 Desktop: LXQt (Openbox 3.6.1)
           Distro: Artix rolling
Machine:   Device: desktop System: Gigabyte product: AB350M-DS3H serial: N/A
           Mobo: Gigabyte model: AB350M-DS3H-CF v: x.x serial: N/A
           UEFI [Legacy]: American Megatrends v: F23 date: 08/08/2018
Battery    hidpp__0: charge: 90% condition: NA/NA Wh model: Logitech M570 status: Discharging
CPU:       Quad core AMD Ryzen 5 2400G with Radeon Vega Graphics (-MT-MCP-) arch: Zen rev.0 cache: 2048 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 28756
           clock speeds: max: 3600 MHz 1: 1640 MHz 2: 2107 MHz 3: 1387 MHz 4: 1406 MHz 5: 1993 MHz 6: 1709 MHz
           7: 1377 MHz 8: 1379 MHz
Memory:    Array-1 capacity: 256 GB (check) devices: 4 EC: None
           Device-1: DIMM 0 size: No Module Installed type: N/A
           Device-2: DIMM 1 size: 8 GB speed: 3000 MT/s type: DDR4 part: CMK16GX4M2B3000C15
           Device-3: DIMM 0 size: No Module Installed type: N/A
           Device-4: DIMM 1 size: 8 GB speed: 3000 MT/s type: DDR4 part: CMK16GX4M2B3000C15
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
           bus-ID: 08:00.0
           Display Server: X.org 1.20.2 drivers: ati,amdgpu (unloaded: modesetting,fbdev,vesa)
           tty size: 190x50 Advanced Data: N/A for root
Audio:     Card-1 Advanced Micro Devices [AMD] Device 15e3 driver: snd_hda_intel bus-ID: 08:00.6
           Card-2 Advanced Micro Devices [AMD/ATI] Device 15de driver: snd_hda_intel bus-ID: 08:00.1
           Sound: Advanced Linux Sound Architecture v: k4.18.16-zen1-1-zen
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: f000 bus-ID: 04:00.0
           IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (1.3% used)
           ID-1: /dev/sda model: SanDisk_Ultra_II size: 500.1GB temp: 30C
Partition: ID-1: / size: 15G used: 5.8G (42%) fs: ext4 dev: /dev/sda3
           ID-2: /home size: 25G used: 114M (1%) fs: ext4 dev: /dev/sda4
           ID-3: /boot size: 2.0G used: 84M (5%) fs: ext4 dev: /dev/sda2
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 27.0
Info:      Processes: 218 Uptime: 16 min Memory: 1178.9/14034.8MB
           Init: N/A rc: OpenRC runlevel: default Gcc sys: 8.2.1 Client: Shell (sudo) inxi: 2.3.56


Re: A new build server?

Reply #4
I can also offer my help
Code: [Select]
System:    Host: rps-server Kernel: 4.14.78-1-lts x86_64 bits: 64 gcc: 8.2.1 Desktop: dwm 6.1
           Distro: Artix Linux ()
Machine:   Device: desktop Mobo: ASUSTeK model: PRIME A320M-K v: Rev X.0x serial: <filter>
           UEFI: American Megatrends v: 4023 date: 08/20/2018
CPU:       6 core AMD Ryzen 5 1600 Six-Core (-MT-MCP-) arch: Zen rev.1 cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 38327
           clock speeds: max: 3200 MHz 1: 1539 MHz 2: 1466 MHz 3: 1373 MHz 4: 1374 MHz 5: 1374 MHz 6: 1373 MHz
           7: 1374 MHz 8: 1371 MHz 9: 1373 MHz 10: 1371 MHz 11: 1374 MHz 12: 1372 MHz
Memory:    Array-1 capacity: 256 GB (check) devices: 2 EC: None
           Device-1: DIMM_A1 size: 8 GB speed: 2666 MT/s type: DDR4 part: BLS8G4D26BFSBK.8FD
           Device-2: DIMM_B1 size: 8 GB speed: 2666 MT/s type: DDR4 part: BLS8G4D26BFSBK.8FD
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Lexa PRO [Radeon RX 550/550X] bus-ID: 07:00.0
           Display Server: X.Org 1.20.2 drivers: ati,amdgpu (unloaded: modesetting)
           Resolution: [email protected]
           OpenGL: renderer: Radeon RX 550 Series (POLARIS12, DRM 3.19.0, 4.14.78-1-lts, LLVM 7.0.0)
           version: 4.5 Mesa 18.2.3 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
           driver: snd_hda_intel bus-ID: 09:00.3
           Card-2 Advanced Micro Devices [AMD/ATI] Device aae0 driver: snd_hda_intel bus-ID: 07:00.1
           Sound: Advanced Linux Sound Architecture v: k4.14.78-1-lts
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: f000 bus-ID: 05:00.0
           IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2120.4GB (17.9% used)
           ID-1: /dev/sda model: PH6 size: 120.0GB temp: 33C
           ID-2: /dev/sdb model: WDC_WD20PURZ size: 2000.4GB temp: 36C
Partition: ID-1: / size: 112G used: 34G (31%) fs: btrfs dev: /dev/sda2
           ID-2: /home size: 20G used: 11G (59%) fs: ext4 dev: /dev/dm-3
Sensors:   System Temperatures: cpu: 43.0C mobo: 35.0C gpu: 38.0
           Fan Speeds (in rpm): cpu: 0 fan-1: 1136 fan-2: 0
Info:      Processes: 304 Uptime: 1:06 Memory: 1411.4/16041.9MB Init: N/A Gcc sys: 8.2.1
           Client: Shell (sudo) inxi: 2.3.56
ARMtix

Re: A new build server?

Reply #5
Sweet looking machine.  lets get at least one server on each continent?


Re: A new build server?

Reply #7
Is there still a need for a build server and/or a download mirror (repos and/or isos)?
If so, let me know. I'll then check how I could help...


 

Re: A new build server?

Reply #9
Sorry I have bad news.
The machine I wanted to use for this was sitting around in the corner for quite a while.
Now it looks like that there's something broken (I suspect the mainboard).
If I get it running again I'll let you know.

Re: A new build server?

Reply #10
Memory:
  RAM: total: 31.21 GiB used: 2.78 GiB (8.9%)
  RAM Report: missing: Required program dmidecode not available


Anyone know what this means?  I am looking around at my spare servers to see if I have one.

Re: A new build server?

Reply #11
world/dmidecode 3.2-1
    Desktop Management Interface table related utilities

What do you use to get ram status with?

Re: A new build server?

Reply #12
world/dmidecode 3.2-1
    Desktop Management Interface table related utilities

What do you use to get ram status with?


well, this is my workstation



Code: [Select]
[ruben@flatbush ~]$ sudo inxi -Fxzmc0
[sudo] password for ruben:
System:
  Host: flatbush Kernel: 4.20.12-artix1-1-ARTIX x86_64 bits: 64
  compiler: gcc v: 8.2.1 Console: tty 11 Distro: Artix rolling
Machine:
  Type: Desktop System: HP product: HP Z240 Tower Workstation v: N/A
  serial: <filter>
  Mobo: HP model: 802F serial: <filter> UEFI: HP v: N51 Ver. 01.63
  date: 10/05/2017
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M510
  charge: 55% (should be ignored) status: Discharging
Memory:
  RAM: total: 31.21 GiB used: 4.13 GiB (13.2%)
  Array-1: capacity: 64 GiB slots: 4 EC: None max module size: 16 GiB
  note: est.
  Device-1: DIMM4 size: 8 GiB speed: 2133 MT/s type: DDR4
  Device-2: DIMM3 size: 8 GiB speed: 2133 MT/s type: DDR4
  Device-3: DIMM2 size: 8 GiB speed: 2133 MT/s type: DDR4
  Device-4: DIMM1 size: 8 GiB speed: 2133 MT/s type: DDR4
CPU:
  Topology: Quad Core model: Intel Core i7-6700 bits: 64 type: MT MCP
  arch: Skylake-S rev: 3 L2 cache: 8192 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 54544
  Speed: 801 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 840 2: 840
  3: 863 4: 884 5: 840 6: 838 7: 820 8: 840
Graphics:
  Device-1: Intel HD Graphics 530 driver: i915 v: kernel bus ID: 00:02.0
  Display: server: X.Org 1.20.4 driver: intel
  unloaded: fbdev,modesetting,vesa tty: N/A
  OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
  v: 4.5 Mesa 18.3.4 direct render: Yes
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3
  Sound Server: ALSA v: k4.20.12-artix1-1-ARTIX
Network:
  Device-1: Intel Ethernet I219-LM driver: e1000e v: 3.2.6-k port: efa0
  bus ID: 00:1f.6
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 3.65 TiB used: 755.41 GiB (20.2%)
  ID-1: /dev/sda vendor: Toshiba model: DT01ACA100 size: 931.51 GiB
  ID-2: /dev/sdb type: USB vendor: Toshiba model: DT01ACA300 size: 2.73 TiB
  ID-3: /dev/sdd type: USB vendor: Kingston model: FCR-HS219 1
  size: 14.84 GiB
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0
  bus ID: 00:17.0
Partition:
  ID-1: / size: 881.81 GiB used: 755.20 GiB (85.6%) fs: ext4 dev: /dev/sda2
  ID-2: swap-1 size: 34.33 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3
Sensors:
  System Temperatures: cpu: 51.5 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 230 Uptime: 2d 23h 40m Init: N/A rc: OpenRC v: 0.41.2
  runlevel: default Compilers: gcc: 8.2.1 clang: 7.0.1 Shell: bash v: 5.0.0
  inxi: 3.0.26


But I have several other spare boxes considerably older


how much power do we need?  I might be able to get something either from NYLXS or an assoicate donner

Re: A new build server?

Reply #13
well, this is my workstation
But I have several other spare boxes considerably older
how much power do we need?  I might be able to get something either from NYLXS or an assoicate donner

Thanks for the offer, but we've just got a new dedicated server from Brecht-Schule Hamburg and it's expected to cover our needs for a long time.