What info besides the picture do I need to give?
Boot partition
$ ls -lha
total 293M
drwxr-xr-x 4 folaht folaht 4,0K 1 jan 1970 .
drwxr-x---+ 4 root root 80 4 apr 10:36 ..
-rw-r--r-- 1 folaht folaht 334 24 feb 14:14 boot.cmd
-rw-r--r-- 1 folaht folaht 87 24 feb 13:54 cmdline.txt
-rw-r--r-- 1 folaht folaht 131 24 feb 13:54 config.txt
drwxr-xr-x 18 folaht folaht 4,0K 7 dec 18:48 dtbs
drwxr-xr-x 18 folaht folaht 4,0K 4 apr 00:08 dtbs-lts
-rw-r--r-- 1 folaht folaht 39M 15 feb 12:45 Image
-rw-r--r-- 1 folaht folaht 15M 15 feb 12:45 Image.gz
-rw-r--r-- 1 folaht folaht 87M 4 apr 01:19 initramfs-linux-fallback.img
-rw-r--r-- 1 folaht folaht 7,5M 4 apr 01:12 initramfs-linux.img
-rw-r--r-- 1 folaht folaht 87M 4 apr 01:11 initramfs-linux-lts-fallback.img
-rw-r--r-- 1 folaht folaht 7,7M 4 apr 01:03 initramfs-linux-lts.img
-rw-r--r-- 1 folaht folaht 39M 15 feb 16:14 ltsImage
-rw-r--r-- 1 folaht folaht 15M 15 feb 16:14 ltsImage.gz
config.txt
enable_uart=1
arm_64bit=1
kernel=/Image
initramfs /initramfs-linux.img followkernel
device-tree=/dtbs/broadcom/bcm2711-rpi-4-b.dtb
boot.cmd
setenv bootargs console=ttyS1,115200 console=tty0 root=/dev/mmcblk1p2 rw rootwait smsc95xx.macaddr="${usbethaddr}"
load mmc 0:1 ${kernel_addr_r} /Image
load mmc 0:1 ${ramdisk_addr_r} /initramfs-linux.uimg
load mmc 0:1 ${fdt_addr_r} /dtbs/broadcom/bcm2711-rpi-4-b.dtb
booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
console=ttyS1,115200 earlyprintk=serial,ttyS1,115200 root=/dev/mmcblk1p2 rw rootwait smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
Topic: [Solved] Custom installed ARMtix on RPi4. GPT: No bootable partitions (Read 147 times)
previous topic - next topic
