I updated last week, everything has been running as usual, but one boot earlier today I had a soft lockup. Pressing the power button and rebooting saw it boot as usual. Nothing was logged. I took some photos of the screen messages. I think it was quite early in the boot but I wasn't really paying attention until I saw it looking strange. There would be some error, then after a few seconds it would scroll through the next set of errors. Also on the latest boot (not that one) I logged some alsa error, it wasn't saved in rc.log but was in consolelogga.log, this might not be related to the soft lockup as the btrfs scrub was clean and I have not changed anything since the last upgrade.
Photo links:
https://yadi.sk/i/rGHb9rSSngt6yA
https://yadi.sk/i/lb7XWUMbOhMvpQ
https://yadi.sk/i/5ZA5XhqB2tXWmQ
https://yadi.sk/i/vK8-wdY_qn3lKg
[2019-01-03 20:07] [PACMAN] Running 'pacman -Syyu'
$ sudo btrfs scrub start /
scrub started on /, fsid 7002a85b-74aa-4374-b55a-61067abb4e94 (pid=2567)
$ sudo btrfs scrub status /
scrub status for 7002a85b-74aa-4374-b55a-61067abb4e94
scrub started at Wed Jan 9 19:34:03 2019 and finished after 00:02:14
total bytes scrubbed: 26.25GiB with 0 errors
$ sudo inxi -zv7
System: Host: ax Kernel: 4.19.12-artix1-1-ARTIX x86_64 bits: 64 compiler: gcc v: 8.2.1 Desktop: Xfce 4.12.4
tk: Gtk 2.24.32 info: xfce4-panel wm: xfwm4 dm: startx Distro: Artix Linux
Machine: Type: Portable System: Dell product: Precision M4400 v: N/A serial: <filter> Chassis: type: 8
serial: <filter>
Mobo: Dell model: 0NY980 serial: <filter> BIOS: Dell v: A29 date: 06/04/2013
Battery: ID-1: BAT0 charge: 69.7 Wh condition: 69.7/73.3 Wh (95%) volts: 12.1/11.1 model: Sanyo DELL U726H8A
type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 7.78 GiB used: 619.5 MiB (7.8%)
RAM Report: missing: Required program dmidecode not available
CPU: Topology: Dual Core model: Intel Core2 Duo T9900 bits: 64 type: MCP arch: Penryn rev: A
L2 cache: 6144 KiB bogomips: 12240
Speed: 1811 MHz min/max: 800/3068 MHz boost: enabled Core speeds (MHz): 1: 2063 2: 2131
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl
dtes64 dtherm dts est flexpriority fpu fxsr ht ida lahf_lm lm mca mce mmx monitor msr mtrr nopl nx
pae pat pbe pdcm pebs pge pni pse pse36 pti rep_good sep smx ss sse sse2 sse4_1 ssse3 syscall tm tm2
tpr_shadow tsc vme vmx vnmi xsave xtpr
Graphics: Device-1: NVIDIA G96GLM [Quadro FX 770M] vendor: Dell driver: nouveau v: kernel bus ID: 01:00.0
chip ID: 10de:065c
Display: server: X.Org 1.20.3 driver: nouveau unloaded: fbdev,modesetting,vesa alternate: nv
resolution: 1440x900~60Hz
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: Intel 82801I HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:293e
Sound Server: ALSA v: k4.19.12-artix1-1-ARTIX
Network: Device-1: Intel 82567LM Gigabit Network vendor: Dell driver: e1000e v: 3.2.6-k port: efe0
bus ID: 00:19.0 chip ID: 8086:10f5
IF: enp0s25 state: down mac: <filter>
Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel port: df00 bus ID: 0c:00.0
chip ID: 8086:4235
IF: wlp12s0 state: up mac: <filter>
IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
IP v6: <filter> scope: link
WAN IP: <filter>
Drives: Local Storage: total: 111.79 GiB used: 26.37 GiB (23.6%)
ID-1: /dev/sda model: SSD2S120SF1200SA2 size: 111.79 GiB speed: 3.0 Gb/s serial: <filter> rev: BBF0
scheme: GPT
Optical-1: /dev/sr0 vendor: MATSHITA model: DVD+-RW UJ862A rev: 1.02 dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / size: 30.00 GiB used: 26.31 GiB (87.7%) fs: btrfs dev: /dev/sda4 label: root1
uuid: 7002a85b-74aa-4374-b55a-61067abb4e94
ID-2: /boot size: 1024.0 MiB used: 61.8 MiB (6.0%) fs: btrfs dev: /dev/sda2 label: N/A
uuid: 75c0faca-5886-4abb-aa12-ee239202ffa4
ID-3: swap-1 size: 16.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 label: swap
uuid: 402f9ace-25f8-4dc7-a7ab-c1ce4cbd34a8
Unmounted: ID-1: /dev/sda1 size: 1024 KiB fs: N/A label: N/A uuid: N/A
ID-2: /dev/sda5 size: 30.00 GiB fs: btrfs label: rootantiX
uuid: 3a0301c6-3c6c-4e27-9357-a0572cb201ce
ID-3: /dev/sda6 size: 20.00 GiB fs: btrfs label: 20g_partition
uuid: 463b5c9f-8668-4702-b40d-845ec7d4b098
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Device-1: 5-1:2 info: Broadcom BCM5880 Secure Applications Processor with fingerprint touch sensor
type: Smart Card driver: N/A interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0a5c:5802
serial: <filter>
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 30.0 C mobo: N/A sodimm: 37.0 C gpu: nouveau temp: 49 C
Fan Speeds (RPM): cpu: 0
Info: Processes: 191 Uptime: 30m Init: N/A v: N/A rc: OpenRC v: 0.40.3 runlevel: default Compilers:
gcc: 8.2.1 alt: 5 Shell: bash (sudo) v: 4.4.23 running in: xfce4-terminal inxi: 3.0.26
Starting boot runlevel [ ok ]
* Creating list of required static device nodes for the current kernel ... [ ok ]
* Setting system clock using the hardware clock [UTC] ...
* Setting up tmpfiles.d entries for /dev ... [ ok ]
* Generating a rule to create a /dev/root symlink ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
Starting default runlevel [ ok ]
* Mounting misc binary format filesystem ... [ ok ]
* Checking local filesystems ... [ ok ]
* Loading custom binary format handlers ... [ ok ]
* Remounting filesystems ... [ ok ]
* Updating /etc/mtab ...
* Creating mtab symbolic link [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ...
* Configuring kernel parameters ... [ ok ] [ ok ]
* Creating user login records ... [ ok ]
* Starting dbus ...
* Restoring Mixer Levels ... [ ok ]
* Starting elogind ... [ ok ]
* Setting hostname to flute from /etc/hostname ... [ ok ]
* Setting terminal encoding [UTF-8] ... [ ok ]
* Setting keyboard mode [UTF-8] ... [ ok ]
* Loading key mappings [us] ... [ ok ]
* Bringing up network interface lo ... [ ok ]
* Bringing up interface lo
* Caching network module dependencies
need dbus
* 127.0.0.1/8 ... [ ok ]
* Adding routes
* 127.0.0.0/8 via 127.0.0.1 ... [ ok ] [ ok ]
* Setting up sysusers.d entries ... [ ok ]
* Setting up tmpfiles.d entries ... [ ok ]
* Saving key mapping ... [ ok ]
* Saving terminal encoding ... [ ok ]
* Initializing random number generator ... [ ok ]
alsactl: unrecognized option '---'
Usage: alsactl <options> command
global options:
-h,--help this help
-d,--debug debug mode
-v,--version print version of this program
Available state options:
-f,--file # configuration file (default /var/lib/alsa/asound.state)
-l,--lock use file locking to serialize concurrent access
-L,--no-lock do not use file locking to serialize concurrent access
-O,--lock-state-file # state lock file path (default /var/lock/asound.state.lock)
-F,--force try to restore the matching controls as much as possible
(default mode)
-g,--ignore ignore 'No soundcards found' error
-P,--pedantic do not restore mismatching controls (old default)
-I,--no-init-fallback
don't initialize even if restore fails
-r,--runstate # save restore and init state to this file (only errors)
default settings is 'no file set'
-R,--remove remove runstate file at first, otherwise append errors
-p,--period # store period in seconds for the daemon command
-e,--pid-file # pathname for the process id (daemon mode)
Available init options:
-E,--env #=# set environment variable for init phase (NAME=VALUE)
-i,--initfile # main configuation file for init phase
(default /usr/share/alsa/init/00main)
-b,--background run daemon in background
-s,--syslog use syslog for messages
-n,--nice # set the process priority (see 'man nice')
-c,--sched-idle set the process scheduling policy to idle (SCHED_IDLE)
Available commands:
store <card> save current driver setup for one or each soundcards
to configuration file
restore <card> load current driver setup for one or each soundcards
from configuration file
nrestore <card> like restore, but notify the daemon to rescan soundcards
init <card> initialize driver to a default state
daemon <card> store state periodically for one or each soundcards
rdaemon <card> like daemon but do the state restore at first
kill <cmd> notify daemon to quit, rescan or save_and_quit
monitor <card> monitor control events
* Errors while restoring defaults, ignoring [ ok ]
* Starting avahi-daemon ... [ ok ]
* Starting cronie ... [ ok ]
* ERROR: netmount needs service(s) net
* Starting ntpd ... [ ok ]
* Starting vnstatd ... [ ok ]
* Starting local ... [ ok ]
* Error: fopen(/run/openrc/rc.log) failed: No such file or directory
Topic: Soft lockup at boot (Read 1166 times)
previous topic - next topic
