Hello!
I have set up a load of crons that help me check for some accounts and i have them checking if i have internet by using a ping -q -c 1 example.org
Yesterday that worked great as always. But today i logged in and suddenly i couldn't get the ping working.
$ ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
^C
--- 1.1.1.1 ping statistics ---
8 packets transmitted, 0 received, 100% packet loss, time 7106ms
ip addr outputs:
$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 1c:1b:0d:57:06:21 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.38/24 brd 192.168.1.255 scope global dynamic noprefixroute enp1s0
valid_lft 25563sec preferred_lft 25563sec
inet6 fe80::8728:9b37:2f4d:43d4/64 scope link noprefixroute
valid_lft forever preferred_lft forever
I can use internet and i don't have any firewall or anything, everything works except ping. Anyone have any idea why this happens?
Edit: I'm running runit and i have enabled dbus and NetworkManager.
Edit2: I tried to check status with sv status NetworkManager
and i got:
down: NetworkManager: 1s, normally up, want up
I tried to use sv up and it gets running for 1 second and then goes down again.
I just moved from systemd to runit and i don't actually know if there is some log. Anyone has any ideas?
Edit3: I had installed dhcpcd. I removed it and installed dhcpcd-runit, enabled it and i still have the ping error and NetworkManager is still down. I stopped dhcpcd and i got disconnected from internet and couldn't get to start networkManager. So i started again dhcpcd and now i'm in the same place. Any ideas?
Topic: [SOLVED] Ping doesn't work? (Read 771 times)
previous topic - next topic
