i installed lxqt into a virtualbox and discovered 3 files sitting on the desktop
or more properly, links to them. there were 3 pdf files i opened in each one in turn and then saved it to the desktop (since the originals were just links) under the same name and then copied them to my desktop and read them.
It was so amazing that i actually learned something useful. Why would anyone provide such useful and necessary info for their linux? boggles the mind.
Anyway, one was called configuration.pdf and another dinit.pdf and the last one troubleshooting.pdf. what the what? i learned about networking, user permissions, and alsa and some stuffopenrc and runit in the config.pdf. the dinit.pdf taught me how to look for dinit files for services and how to add them to running services or to start, stop, or restart them. AND in the troubleshooting.pdf i found a file i can create when my non xbox controller doesn't map according to xbox pattern (switches x and y keys or something). And things like what to do after an update when my system doesn't boot. And when my themes are off how to make them right or sometimes better-ish. And scores of other things i might need to know.
I just gotta ask, who are you people??
That is so very thoughtful and handy and useful. Thank you artix devs for thinking of us little peoples who knows nothing about nothing but wanna be cool and use linux like a nerdy nerd.
excuse me while i browse the new pocket protectors and bow ties on amazon. Gooday!
sudo inxi -Fxzm
[sudo] password for catherdersoflinux:
System:
Kernel: 5.17.12-lqx2-3-lqx arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
Desktop: MATE v: 1.26.0 Distro: Artix Linux base: Arch Linux
Machine:
Type: Desktop System: HP product: HP EliteDesk 800 G3 SFF v: N/A
serial: <filter>
Mobo: HP model: 8299 v: KBC Version 06.29 serial: <filter> UEFI: HP
v: P01 Ver. 02.40 date: 04/08/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech M570 charge: 95%
status: discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Keyboard K360
charge: 100% (should be ignored) status: discharging
Memory:
RAM: total: 31.24 GiB used: 1.25 GiB (4.0%)
Array-1: capacity: 64 GiB slots: 4 EC: None max-module-size: 16 GiB
note: est.
Device-1: DIMM4 type: no module installed
Device-2: DIMM3 type: DDR4 size: 16 GiB speed: 2400 MT/s
Device-3: DIMM2 type: no module installed
Device-4: DIMM1 type: DDR4 size: 16 GiB speed: 2400 MT/s
CPU:
Info: quad core model: Intel Core i7-7700 bits: 64 type: MT MCP
arch: Kaby Lake rev: 9 cache: L1: 256 KiB L2: 1024 KiB L3: 8 MiB
Speed (MHz): avg: 3601 min/max: 800/3601 boost: enabled cores: 1: 3601
2: 3601 3: 3601 4: 3601 5: 3601 6: 3601 7: 3601 8: 3601 bogomips: 57600
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel HD Graphics 630 vendor: Hewlett-Packard driver: i915
v: kernel bus-ID: 00:02.0
Display: x11 server: X.org v: 1.21.1.3 driver: X: loaded: intel
unloaded: fbdev,modesetting,vesa gpu: i915 resolution: 1: 1920x1080~60Hz
2: 1280x1024~60Hz
Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: Intel 200 Series PCH HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
Sound Server-1: ALSA v: k5.17.12-lqx2-3-lqx running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.0 running: yes
Sound Server-4: PipeWire v: 0.3.51 running: no
Network:
Device-1: Intel Ethernet I219-LM vendor: Hewlett-Packard driver: e1000e
v: kernel port: N/A bus-ID: 00:1f.6
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.48 TiB used: 650.39 GiB (42.9%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WD BLACK SN770 500GB
size: 465.76 GiB temp: 30.9 C
ID-2: /dev/sda vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
ID-3: /dev/sdb vendor: Micron model: MT-128 size: 119.24 GiB
Partition:
ID-1: / size: 97.87 GiB used: 16.11 GiB (16.5%) fs: ext4
dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 512 MiB used: 296 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 358.46 GiB used: 20.31 GiB (5.7%) fs: ext4
dev: /dev/nvme0n1p3
Swap:
ID-1: swap-1 type: partition size: 64 GiB used: 0 KiB (0.0%) dev: /dev/sda1
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 204 Uptime: 2h 15m Init: N/A Compilers: gcc: 12.1.0
Packages: 936 Shell: Bash v: 5.1.16 inxi: 3.3.15
Topic: i installed lxqt into a virtualbox and discovered 3 files sitting on the desktop (Read 387 times)
previous topic - next topic
