Skip to main content ↑ ↓
Topic: adding a new e1000e kernel module (Read 1382 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.

adding a new e1000e kernel module

I'm having trouble with my ethernet hardware  and intel  has a new version of the module that is not in the current kernel source


https://downloadmirror.intel.com/15817/eng/e1000e-3.3.6.tar.gz


The current one keeps reseting

Code: [Select]
[259497.984722] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[265528.099523] r8169 0000:06:00.0 eth0: link down
[265530.275688] r8169 0000:06:00.0 eth0: link up
[265542.783353] r8169 0000:06:00.0 eth0: link down
[265544.941216] r8169 0000:06:00.0 eth0: link up
[269758.681906] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:
[269760.682097] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:
[269762.682256] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:
[269763.641482] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly
[269769.643665] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

[www3 ~]# modinfo e1000e
filename:       /lib/modules/4.9.67-1-lts/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko.gz
version:        3.2.6-k
license:        GPL
description:    Intel(R) PRO/1000 Network Driver
author:         Intel Corporation, <[email protected]>
srcversion:     65DB28C103308597281BE3A

That is a whole version less than the current one on the intel site.

Is there a pacman way of installing the tar.gz tarball? and is there a way of keeping it with kernel upgrades?

Ruben

Re: adding a new e1000e kernel module

Reply #1 –
Code: [Select]
titan:[orion]:~% yaourt e1000e
1 aur/e1000e-dkms 3.3.6-1 (4) (0,14)
    Intel e1000e Ethernet adapter driver (latest version from Intel) (DKMS version)
==> Enter n° of packages to be installed (e.g., 1 2 3 or 1-3)