now part two
[ 0.463349] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.463356] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.463360] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.463363] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.463367] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.463371] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.463375] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.463379] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.463383] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.463387] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.463390] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.463394] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.463398] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.463401] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.463405] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.463410] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.463425] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.463680] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.463720] system 00:01: [io 0x1800-0x189f] has been reserved
[ 0.463725] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.463729] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.463732] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.463736] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.463740] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.463743] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.463747] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.463751] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.463754] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.463758] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.463762] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.463768] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.463773] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.463776] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.463780] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.463784] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.463788] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.463799] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463991] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.464040] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.464085] pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active)
[ 0.465478] system 00:05: [mem 0xd0010000-0xd001ffff] has been reserved
[ 0.465483] system 00:05: [mem 0xd0000000-0xd000ffff] has been reserved
[ 0.465494] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465630] pnp: PnP ACPI: found 6 devices
[ 0.473207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.473363] NET: Registered protocol family 2
[ 0.473841] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.473988] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.474411] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.474644] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.474834] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.474968] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.475042] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.475186] NET: Registered protocol family 1
[ 0.475198] NET: Registered protocol family 44
[ 0.475223] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.475234] pci 0000:00:1c.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.475248] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.475256] pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.475272] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.475276] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.475279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.475283] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
[ 0.475286] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.475290] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.475293] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.475557] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.476865] PCI: CLS 64 bytes, default 64
[ 0.476974] Trying to unpack rootfs image as initramfs...
[ 0.597453] Freeing initrd memory: 5376K
[ 0.597550] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.597556] software IO TLB: mapped [mem 0x00000000bb576000-0x00000000bf576000] (64MB)
[ 0.598517] check: Scanning for low memory corruption every 60 seconds
[ 0.599338] Initialise system trusted keyrings
[ 0.599359] Key type blacklist registered
[ 0.599480] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.602878] zbud: loaded
[ 0.637546] Key type asymmetric registered
[ 0.637550] Asymmetric key parser 'x509' registered
[ 0.637567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.637665] io scheduler mq-deadline registered
[ 0.637668] io scheduler kyber registered
[ 0.637729] io scheduler bfq registered
[ 0.637911] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.638989] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.639069] efifb: probing for efifb
[ 0.639099] efifb: No BGRT, not showing boot graphics
[ 0.639102] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.639105] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.639107] efifb: scrolling: redraw
[ 0.639111] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.639202] fbcon: Deferring console take-over
[ 0.639205] fb0: EFI VGA frame buffer device
[ 0.639227] intel_idle: MWAIT substates: 0x11142120
[ 0.639230] intel_idle: v0.5.1 model 0x3D
[ 0.639973] intel_idle: Local APIC timer is reliable in all C-states
[ 0.640602] ACPI: AC Adapter [AC] (off-line)
[ 0.640739] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.640825] ACPI: Lid Switch [LID]
[ 0.640902] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.640966] ACPI: Sleep Button [SLPB]
[ 0.641075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.641142] ACPI: Power Button [PWRF]
[ 0.645390] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.645395] ACPI: Thermal Zone [THM0] (35 C)
[ 0.645915] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.650986] Non-volatile memory driver v1.3
[ 0.650991] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 0.650993] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.653922] ahci 0000:00:1f.2: version 3.0
[ 0.654347] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[ 0.654355] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.655713] scsi host0: ahci
[ 0.656710] scsi host1: ahci
[ 0.657469] scsi host2: ahci
[ 0.657576] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 44
[ 0.657579] ata2: DUMMY
[ 0.657582] ata3: DUMMY
[ 0.657671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.657694] ehci-pci: EHCI PCI platform driver
[ 0.658046] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.658059] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.658083] ehci-pci 0000:00:1d.0: debug port 2
[ 0.662010] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.662056] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000
[ 0.665224] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.671678] random: fast init done
[ 0.682875] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.687668] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.687803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 0.687808] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687811] usb usb1: Product: EHCI Host Controller
[ 0.687814] usb usb1: Manufacturer: Linux 5.10.34-1-lts ehci_hcd
[ 0.687817] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.688237] hub 1-0:1.0: USB hub found
[ 0.688257] hub 1-0:1.0: 3 ports detected
[ 0.689073] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.689084] ohci-pci: OHCI PCI platform driver
[ 0.689105] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689191] usbcore: registered new interface driver usbserial_generic
[ 0.689202] usbserial: USB Serial support registered for generic
[ 0.689902] rtc_cmos 00:02: RTC can wake from S4
[ 0.690438] rtc_cmos 00:02: registered as rtc0
[ 0.690516] rtc_cmos 00:02: setting system clock to 2021-05-09T18:11:46 UTC (1620583906)
[ 0.690553] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.690655] intel_pstate: Intel P-state driver initializing
[ 0.691137] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.691365] hid: raw HID events driver (C) Jiri Kosina
[ 0.691428] drop_monitor: Initializing network drop monitor service
[ 0.691485] Initializing XFRM netlink socket
[ 0.691583] NET: Registered protocol family 10
[ 0.696046] Segment Routing with IPv6
[ 0.696048] RPL Segment Routing with IPv6
[ 0.696069] NET: Registered protocol family 17
[ 0.696271] microcode: sig=0x306d4, pf=0x40, revision=0x2d
[ 0.696290] microcode: Microcode Update Driver: v2.2.
[ 0.696294] IPI shorthand broadcast: enabled
[ 0.696310] sched_clock: Marking stable (695477938, 731660)->(781759266, -85549668)
[ 0.696389] registered taskstats version 1
[ 0.696397] Loading compiled-in X.509 certificates
[ 0.699232] Loaded X.509 cert 'Build time autogenerated kernel key: 41ec580fb4987792d8eafda431462039af30497b'
[ 0.699312] zswap: loaded using pool lz4/z3fold
[ 0.699407] Key type ._fscrypt registered
[ 0.699408] Key type .fscrypt registered
[ 0.699408] Key type fscrypt-provisioning registered
[ 0.699815] PM: Magic number: 5:196:190
[ 0.699853] acpi device:1c: hash matches
[ 0.699946] RAS: Correctable Errors collector initialized.
[ 0.997693] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.000337] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.000340] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.000341] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.000690] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.002837] ata1.00: ATA-10: INTEL SSDSC2BF180A5L, LUDi, max UDMA/133
[ 1.002840] ata1.00: 351651888 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.010451] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.010454] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.010456] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.010807] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1.018028] ata1.00: configured for UDMA/133
[ 1.018973] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LUDi PQ: 0 ANSI: 5
[ 1.019166] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB)
[ 1.019174] sd 0:0:0:0: [sda] Write Protect is off
[ 1.019176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.019186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.020738] sda: sda1 sda2 sda3 sda4
[ 1.021105] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.022293] Freeing unused decrypted memory: 2036K
[ 1.022560] Freeing unused kernel image (initmem) memory: 1724K
[ 1.057689] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.057691] Write protecting the kernel read-only data: 26624k
[ 1.058149] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.058443] Freeing unused kernel image (rodata/data gap) memory: 1456K
[ 1.108576] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.108579] rodata_test: all tests were successful
[ 1.108580] x86/mm: Checking user space page tables
[ 1.156257] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.156261] Run /init as init process
[ 1.156262] with arguments:
[ 1.156263] /init
[ 1.156264] with environment:
[ 1.156264] HOME=/
[ 1.156265] TERM=linux
[ 1.156265] BOOT_IMAGE=/boot/vmlinuz-linux-lts
[ 1.255559] udevd[119]: starting version 3.2.10
[ 1.255734] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.255757] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.256306] udevd[120]: starting eudev-3.2.10
[ 1.260229] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.267988] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 1.267992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.268143] hub 1-1:1.0: USB hub found
[ 1.268232] hub 1-1:1.0: 8 ports detected
[ 1.275863] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.277410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.277415] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.282793] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.282803] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.283880] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 1.283885] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.284095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.284097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.284099] usb usb2: Product: xHCI Host Controller
[ 1.284101] usb usb2: Manufacturer: Linux 5.10.34-1-lts xhci-hcd
[ 1.284102] usb usb2: SerialNumber: 0000:00:14.0
[ 1.284240] hub 2-0:1.0: USB hub found
[ 1.284258] hub 2-0:1.0: 11 ports detected
[ 1.286151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.286157] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.286161] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.286224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.286226] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.286228] usb usb3: Product: xHCI Host Controller
[ 1.286229] usb usb3: Manufacturer: Linux 5.10.34-1-lts xhci-hcd
[ 1.286231] usb usb3: SerialNumber: 0000:00:14.0
[ 1.286363] hub 3-0:1.0: USB hub found
[ 1.286381] hub 3-0:1.0: 4 ports detected
[ 1.303220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.342874] fbcon: Taking over console
[ 1.342981] Console: switching to colour frame buffer device 128x48
[ 1.396555] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.647659] tsc: Refined TSC clocksource calibration: 2294.689 MHz
[ 1.647668] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139c00f92, max_idle_ns: 440795293667 ns
[ 1.647686] clocksource: Switched to clocksource tsc
[ 1.677651] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 1.866864] usb 2-5: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20
[ 1.866868] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.866870] usb 2-5: Product: EMV Smartcard Reader
[ 1.866871] usb 2-5: Manufacturer: Generic
[ 1.959106] udevd[555]: starting version 3.2.10
[ 1.988327] udevd[555]: starting eudev-3.2.10
[ 2.017650] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[ 2.199184] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[ 2.199187] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.199188] usb 2-6: SerialNumber: 3d4a99f1b6bb
[ 2.213533] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.213535] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.213737] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.224018] Linux agpgart interface v0.103
[ 2.282097] vboxdrv: loading out-of-tree module taints kernel.
[ 2.357671] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 2.377690] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 2.412123] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.423869] vboxdrv: Found 4 processor cores
[ 2.439365] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 2.439367] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.439368] thinkpad_acpi: ThinkPad BIOS JBET73WW (1.37 ), EC JBHT17WW
[ 2.439370] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BWS0QH00
[ 2.440433] thinkpad_acpi: radio switch found; radios are enabled
[ 2.440572] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.440574] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.443403] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.468004] vboxdrv: TSC mode is Invariant, tentative frequency 2294688987 Hz
[ 2.468006] vboxdrv: Successfully loaded version 6.1.22 (interface 0x00300000)
[ 2.481656] thinkpad_acpi: battery 2 registered (start 0, stop 100)
[ 2.483644] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 2.483651] battery: new extension: ThinkPad Battery Extension
[ 2.483706] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.487596] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:70:a3:1c
[ 2.487599] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.487623] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 2.548908] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.548911] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.618279] VBoxNetAdp: Successfully started.
[ 2.618921] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.619051] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.640691] VBoxNetFlt: Successfully started.
[ 2.640993] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.648257] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.717777] usb 2-8: new high-speed USB device number 5 using xhci_hcd
[ 2.781492] checking generic (e0000000 300000) vs hw (f0000000 1000000)
[ 2.781496] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 2.781498] fb0: switching to inteldrmfb from EFI VGA
[ 2.787155] Console: switching to colour dummy device 80x25
[ 2.787215] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.787275] Intel(R) Wireless WiFi driver for Linux
[ 2.793517] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 2.793561] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.793806] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 2.794146] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 2.794546] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.797916] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[ 2.797919] iwlwifi 0000:03:00.0: Found debug configuration: 0
[ 2.798304] iwlwifi 0000:03:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm
[ 2.804701] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.848138] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 2.849253] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.849786] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.850047] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.949393] usb 2-8: New USB device found, idVendor=04f2, idProduct=b449, bcdDevice= 0.44
[ 2.949396] usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.949398] usb 2-8: Product: Integrated Camera
[ 2.949399] usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.949401] usb 2-8: SerialNumber: 0x0001
[ 2.963913] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.963916] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.963918] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[ 2.963919] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.963920] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.963921] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 2.963922] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 2.963924] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 3.151632] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.151676] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.151716] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.151756] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.156712] iTCO_vendor_support: vendor-support=0
[ 3.159515] at24 0-0050: supply vcc not found, using dummy regulator
[ 3.160136] at24 0-0050: 256 byte spd EEPROM, read-only
[ 3.165917] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.165969] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 3.166193] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.177079] udevd[693]: Unknown key identifier 'zoom'
[ 3.179959] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 3.180002] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 3.180040] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 3.180080] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 3.180120] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 3.189547] fbcon: i915drmfb (fb0) is primary device
[ 3.189927] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 3.190080] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.190081] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.190081] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.190082] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.190082] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.195084] cryptd: max_cpu_qlen set to 1000
[ 3.203820] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 3.204546] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 3.215795] iwlwifi 0000:03:00.0: base HW address: 18:5e:0f:10:7f:ac
[ 3.284210] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.284500] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 3.288241] AVX2 version of gcm_enc/dec engaged.
[ 3.288242] AES CTR mode by8 optimization enabled
[ 3.683162] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[ 3.714201] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[ 3.714207] psmouse serio1: synaptics: Trying to set up SMBus access
[ 3.818538] rmi4_smbus 0-002c: registering SMbus-connected sensor
[ 3.822654] intel_rapl_common: Found RAPL domain package
[ 3.822655] intel_rapl_common: Found RAPL domain core
[ 3.822656] intel_rapl_common: Found RAPL domain uncore
[ 3.822656] intel_rapl_common: Found RAPL domain dram
[ 3.827739] Adding 8388604k swap on /dev/sda2. Priority:-2 extents:1 across:8388604k SSFS
[ 3.869709] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3053-004, fw id: 1741117
[ 3.887441] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.924564] input: Synaptics TM3053-004 as /devices/rmi4-00/input/input18
[ 3.932331] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[ 3.958262] mousedev: PS/2 mouse device common for all mice
[ 4.223929] Console: switching to colour frame buffer device 200x56
[ 4.244893] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 4.280686] mc: Linux media interface: v0.10
[ 4.309148] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.311383] videodev: Linux video capture interface: v2.00
[ 4.324483] Bluetooth: Core ver 2.22
[ 4.324517] NET: Registered protocol family 31
[ 4.324519] Bluetooth: HCI device and connection manager initialized
[ 4.324523] Bluetooth: HCI socket layer initialized
[ 4.324525] Bluetooth: L2CAP socket layer initialized
[ 4.324531] Bluetooth: SCO socket layer initialized
[ 4.331545] elogind[1993]: New seat seat0.
[ 4.333252] elogind[1993]: Watching system buttons on /dev/input/event2 (Power Button)
[ 4.333973] elogind[1993]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 4.334068] elogind[1993]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 4.335003] elogind[1993]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard)
[ 4.335130] elogind[1993]: Watching system buttons on /dev/input/event4 (ThinkPad Extra Buttons)
[ 4.348617] usbcore: registered new interface driver btusb
[ 4.350643] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b449)
[ 4.356694] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input19
[ 4.357203] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input20
[ 4.357292] usbcore: registered new interface driver uvcvideo
[ 4.357293] USB Video Class driver (1.1.1)
[ 4.363242] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 4.364352] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 4.540233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.540235] Bluetooth: BNEP filters: protocol multicast
[ 4.540238] Bluetooth: BNEP socket layer initialized
[ 4.608224] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 4.626242] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated
[ 4.683346] NET: Registered protocol family 38
[ 4.925330] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 5.010943] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 5.012373] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 5.023807] ACPI: \: failed to evaluate _DSM (0x1001)
[ 5.023809] ACPI: \: failed to evaluate _DSM (0x1001)
[ 5.054207] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 5.133070] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 5.134583] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 5.147663] ACPI: \: failed to evaluate _DSM (0x1001)
[ 5.147665] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.065355] random: crng init done
[ 6.065357] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.115120] elogind[1993]: New session c1 of user sddm.
[ 15.883570] elogind[1993]: New session 1 of user roberto.
[ 16.080950] elogind[1993]: Removed session c1.
[ 17.109001] wlan0: authenticate with 74:42:7f:69:90:42
[ 17.116553] wlan0: send auth to 74:42:7f:69:90:42 (try 1/3)
[ 17.123676] wlan0: authenticated
[ 17.137661] wlan0: associate with 74:42:7f:69:90:42 (try 1/3)
[ 17.140483] wlan0: RX AssocResp from 74:42:7f:69:90:42 (capab=0x1511 status=0 aid=3)
[ 17.142184] wlan0: associated
[ 17.191094] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.195303] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 74:42:7f:69:90:42
[ 17.469493] Bluetooth: RFCOMM TTY layer initialized
[ 17.469501] Bluetooth: RFCOMM socket layer initialized
[ 17.469507] Bluetooth: RFCOMM ver 1.11
[ 18.242420] fuse: init (API version 7.32)
[ 1202.652653] FS-Cache: Loaded
[ 1202.656811] Key type dns_resolver registered
[ 1202.717423] FS-Cache: Netfs 'cifs' registered for caching
[ 1202.720582] Key type cifs.spnego registered
[ 1202.720586] Key type cifs.idmap registered
[ 1202.721132] CIFS: Attempting to mount //172.16.1.135/Daten
[ 1328.019554] SUPR0GipMap: fGetGipCpu=0x1b
[ 1329.579374] vboxdrv: 00000000d208a0d6 VMMR0.r0
[ 1329.849481] vboxdrv: 00000000dfa95006 VBoxDDR0.r0
[ 1329.968669] vboxdrv: 00000000e20e6459 VBoxEhciR0.r0
[ 1329.970313] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
[ 1842.936775] vboxdrv: 00000000f5903fbf VMMR0.r0
[ 1843.181169] vboxdrv: 00000000ecc7edb7 VBoxDDR0.r0
[ 1843.303560] vboxdrv: 000000001a17263c VBoxEhciR0.r0
[ 1843.304741] VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
Topic: [SOLVED] No more mount via fstab (Read 4894 times)
previous topic - next topic