Skip to main content ↑ ↓
Topic solved
This topic has been marked as solved and requires no further attention.
Topic: [SOLVED]Modprobe Issue : Module Not Found (Read 16100 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

[SOLVED]Modprobe Issue : Module Not Found

So im trying to switch over from Manjaro and Im trying to get zenpower working to monitor temps but I keep getting this error trying to activate it:

modprobe: FATAL: Module zenpower not found in directory /lib/modules/5.12.6-artix1-1

 I built zenpower through pamac. I actually had the same issue when I first tried on Manjaro as well, but I tried a diffrent package that installed what I was apparently missing, but none of the 3 zenpower pckages available are giving me that option in Artix, and I didnt pay close enough attention on manjaro to know what Im actually missing :(. I have linux-headers installed.

Re: Modprobe Issue : Module Not Found

Reply #1 –
you need install one of this packages: zenpower-zen3-dkms, zenpower-dkms or zenpower-dkms-git. Be sure that module is realy compiled during installing!

The zenpower kernel module will be available on reboot. To load it now, run "modprobe -r k10temp && modprobe zenpower" as root'

tested on linux-zen:
Code: [Select]
xxx@picasso ~]$ lsmod | grep zenpower
zenpower               16384  0

Re: Modprobe Issue : Module Not Found

Reply #2 –
ive tried all 3 of them

ive already blacklisted k10temp, so sudo modprobe zenpowr should be all I need, but its giving me that error everytime. how can I confirm the module i actually being built? Im admittedly still rather new to linux (around a month) and am still doing a lot of copy and pasting lol.

Re: Modprobe Issue : Module Not Found

Reply #4 –
Quote from: retroracer – on
how can I confirm the module i actually being built?

Run on your terminal (might take a while, since that folder has a lot of things).

Code: [Select]
find "/lib/modules/$(uname -r)" -name 'zenpower.ko*'

If you get no output, then the module really wasn't built.

If I had to guess, I think you're missing the linux-headers package (which is needed for Dkms modules to build). Then reinstall the dkms packages. as alium said, you've already ruled this out

Re: Modprobe Issue : Module Not Found

Reply #6 –
but he wrote: " I have linux-headers installed. "
Quote from: capezotte – on
Run on your terminal (might take a while, since that folder has a lot of things).

Code: [Select]
find "/lib/modules/$(uname -r)" -name 'zenpower.ko*'

If you get no output, then the module really wasn't built.

If I had to guess, I think you're missing the linux-headers package (which is needed for Dkms modules to build). Then reinstall the dkms packages.

Re: Modprobe Issue : Module Not Found

Reply #7 –
sorry, i don't use pamac, just try install zenpower as you know and put here the output...

it should be probably pamac install zenpower-dkms

Re: Modprobe Issue : Module Not Found

Reply #8 –
AFAIK for AUR packages the command is pamac build zenpower-dkms.

Either way, can you show us the output of one of these commands?

Re: Modprobe Issue : Module Not Found

Reply #9 –
as i wrote, i use not pamac  8)  :)

Re: Modprobe Issue : Module Not Found

Reply #11 –
Code: [Select]
Error! Bad return status for module build on kernel: 5.12.6-artix1-1 (x86_64)
Consult /var/lib/dkms/zenpower/0.1.12/build/make.log for more information.
==> Warning, `dkms install --no-depmod -m zenpower -v 0.1.12 -k 5.12.6-artix1-1' returned 10

now you know why... your module was not builded

put here output from
Code: [Select]
cat /var/lib/dkms/zenpower/0.1.12/build/make.log

Re: Modprobe Issue : Module Not Found

Reply #12 –
Quote from: alium – on
Code: [Select]
Error! Bad return status for module build on kernel: 5.12.6-artix1-1 (x86_64)
Consult /var/lib/dkms/zenpower/0.1.12/build/make.log for more information.
==> Warning, `dkms install --no-depmod -m zenpower -v 0.1.12 -k 5.12.6-artix1-1' returned 10

now you know why... your module was not builded

put here output from
Code: [Select]
cat /var/lib/dkms/zenpower/0.1.12/build/make.log

yea I figured as much from you guys earlier response cause I couldnt find any .ko files for it...what can I do about fixing it?

edit: Aurora-R10:[neale]:~$ cat /var/lib/dkms/zenpower/0.1.12/build/make.log
DKMS make.log for zenpower-0.1.12 for kernel 5.12.6-artix1-1 (x86_64)
Thu May 27 13:08:24 EDT 2021
make: uname: No such file or directory
make: make: No such file or directory
make: *** [Makefile:27: modules] Error 127

Re: Modprobe Issue : Module Not Found

Reply #13 –
put here output from
Code: [Select]
cat /var/lib/dkms/zenpower/0.1.12/build/make.log

Re: Modprobe Issue : Module Not Found

Reply #14 –
Quote from: alium – on
put here output from
Code: [Select]
cat /var/lib/dkms/zenpower/0.1.12/build/make.log

i edited my other post but just in case

Aurora-R10:[neale]:~$ cat /var/lib/dkms/zenpower/0.1.12/build/make.log
DKMS make.log for zenpower-0.1.12 for kernel 5.12.6-artix1-1 (x86_64)
Thu May 27 13:08:24 EDT 2021
make: uname: No such file or directory
make: make: No such file or directory
make: *** [Makefile:27: modules] Error 127