Skip to main content ↑ ↓
Topic solved
This topic has been marked as solved and requires no further attention.
Topic: Unable to upgrade to lib32-eudev (owned by lib32-systemd) (Read 1445 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Unable to upgrade to lib32-eudev (owned by lib32-systemd)

When I decided to do an upgrade today I get an error relating to the fact that the package lib32-systemd owns files needed by lib32-libudev and lib32-elogind. Is there a way to fix this conflict so I can upgrade properly? I can't just remove lib32-systemd since a lot of my lib32 packages need it for some reason


Code: [Select]
Looking for conflicting packages...

Packages (10) kitty-git-1:r8746.gd70610f5-1  lib32-dbus-1.12.20-1.1  lib32-elogind-246.10-2
              lib32-eudev-249.4-2  lib32-libffi-3.4.2-3.1  lib32-libltdl-2.4.6+42+gb88cebd5-1.1
              lib32-polkit-0.120-3.1  libwebp-1.2.2-1  neon-0.32.2-1  rubberband-2.0.1-1

Total Installed Size:  25.93 MiB
Net Upgrade Size:       1.24 MiB

:: Proceed with installation? [Y/n] 
(10/10) checking keys in keyring                                    [#####################################] 100%
(10/10) checking package integrity                                  [#####################################] 100%
(10/10) loading package files                                       [#####################################] 100%
(10/10) checking for file conflicts                                 [#####################################] 100%
error: failed to commit transaction (conflicting files)
lib32-eudev: /usr/lib32/libudev.so exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/libudev.so.1 exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/pkgconfig/libudev.pc exists in filesystem (owned by lib32-systemd)
lib32-elogind: /usr/lib32/pkgconfig/libsystemd.pc exists in filesystem (owned by lib32-systemd)
Errors occurred, no packages were upgraded.
 -> error installing repo packages

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #1 –
https://wiki.artixlinux.org/Main/Repositories
https://wiki.artixlinux.org/Main/Repositories#Arch_repositories
https://wiki.artixlinux.org/Site/SteamAnd32bit

Quote from: YoshiLightStar – on
Packages (10) kitty-git-1:r8746.gd70610f5-1
https://wiki.archlinux.org/title/Arch_User_Repository
Quote
Warning: AUR packages are user-produced content. These PKGBUILDs are completely unofficial and have not been thoroughly vetted. Any use of the provided files is at your own risk.

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #2 –
Quote from: strajder – on
https://wiki.artixlinux.org/Main/Repositories
https://wiki.artixlinux.org/Main/Repositories#Arch_repositories
https://wiki.artixlinux.org/Site/SteamAnd32bit
https://wiki.archlinux.org/title/Arch_User_Repository
I have tested and its not kitty that is the source of the problem. I also have multi-lib on so I am not sure how I even got here

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #3 –
Alright I have fixed it basically I just do this and it removes the package without trying to remove all packages that need lib32-systemd so I can install the Artix replacements instead
Code: [Select]
sudo pacman -Rd --nodeps lib32-systemd

EDIT:Might not be a good soultion since when I did this steam no longer works.
EDIT2: I have steam working again I just had to uninstall only lib32-udev lib32-elogind  and then reinstall lib32-systemd and upgrades seem to still work but time will tell I guess?

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #4 –
You should be using the lib32 repos. I'm not sure why you have lib32-systemd installed on an Artix system. The whole point is to remove systemd. You should be using lib32-udev and lib32-elogind instead of lib32-systemd.

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #5 –
Quote from: Dudemanguy – on
You should be using the lib32 repos. I'm not sure why you have lib32-systemd installed on an Artix system. The whole point is to remove systemd. You should be using lib32-udev and lib32-elogind instead of lib32-systemd.
I had installed both of those before but now  steam doesnt work for whatever reason now and that was the only way to fix it even if I use the version of steam in lib32 repo
Code: [Select]
 Error: You are missing the following 32-bit libraries, and Steam may not run:
libsystemd.so.0

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #6 –
Hmm okay that's weird. I have steam installed from lib32 with no such libsystemd 32-bit library and it runs fine.

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #7 –
Alright I fixed it I had to do a symlink and that fixed it
Code: [Select]
sudo ln -s /usr/lib32/libelogind.so /usr/lib32/libsystemd.so.0

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #10 –
Quote from: YoshiLightStar – on
I've already read all of those pages before and yes my pacman.conf is setup and my issue is already fixed
You applied a workaround, not a fix.

Artix repositories need to come before Arch repositories in /etc/pacman.conf. If they were set up like that, this wouldn't happen:
Code: [Select]
error: failed to commit transaction (conflicting files)
lib32-eudev: /usr/lib32/libudev.so exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/libudev.so.1 exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/pkgconfig/libudev.pc exists in filesystem (owned by lib32-systemd)
lib32-elogind: /usr/lib32/pkgconfig/libsystemd.pc exists in filesystem (owned by lib32-systemd)
Instead, you would see this:
Code: [Select]
$ pacman -Ss lib32-systemd
lib32/lib32-artix-archlinux-support 1-1
    Add arch linux multilib repo support
$ LC_ALL=C pacman -Si lib32-artix-archlinux-support
Repository      : lib32
Name            : lib32-artix-archlinux-support
Version         : 1-1
Description     : Add arch linux multilib repo support
Architecture    : any
URL             : https://gitea.artixlinux.org/artix
Licenses        : GPL
Groups          : None
Provides        : lib32-systemd
Depends On      : artix-archlinux-support  lib32-elogind
Optional Deps   : None
Conflicts With  : lib32-systemd
Replaces        : None
Download Size   : 2.32 KiB
Installed Size  : 0.00 KiB
Packager        : Artix Build Bot <[email protected]>
Build Date      : Sun Jul 4 15:55:59 2021
Validated By    : MD5 Sum  SHA-256 Sum  Signature
Emphasizing:
Code: [Select]
Provides        : lib32-systemd
Conflicts With  : lib32-systemd

As Dudemanguy said, the whole point of Artix is to not have any *systemd* packages around.
 

Re: Unable to upgrade to lib32-eudev (owned by lib32-systemd)

Reply #11 –
Quote from: strajder – on
You applied a workaround, not a fix.

Artix repositories need to come before Arch repositories in /etc/pacman.conf. If they were set up like that, this wouldn't happen:
Code: [Select]
error: failed to commit transaction (conflicting files)
lib32-eudev: /usr/lib32/libudev.so exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/libudev.so.1 exists in filesystem (owned by lib32-systemd)
lib32-eudev: /usr/lib32/pkgconfig/libudev.pc exists in filesystem (owned by lib32-systemd)
lib32-elogind: /usr/lib32/pkgconfig/libsystemd.pc exists in filesystem (owned by lib32-systemd)
Instead, you would see this:
Code: [Select]
$ pacman -Ss lib32-systemd
lib32/lib32-artix-archlinux-support 1-1
    Add arch linux multilib repo support
$ LC_ALL=C pacman -Si lib32-artix-archlinux-support
Repository      : lib32
Name            : lib32-artix-archlinux-support
Version         : 1-1
Description     : Add arch linux multilib repo support
Architecture    : any
URL             : https://gitea.artixlinux.org/artix
Licenses        : GPL
Groups          : None
Provides        : lib32-systemd
Depends On      : artix-archlinux-support  lib32-elogind
Optional Deps   : None
Conflicts With  : lib32-systemd
Replaces        : None
Download Size   : 2.32 KiB
Installed Size  : 0.00 KiB
Packager        : Artix Build Bot <[email protected]>
Build Date      : Sun Jul 4 15:55:59 2021
Validated By    : MD5 Sum  SHA-256 Sum  Signature
Emphasizing:
Code: [Select]
Provides        : lib32-systemd
Conflicts With  : lib32-systemd

As Dudemanguy said, the whole point of Artix is to not have any *systemd* packages around.
I dont have that systemd package installed anymore as I said I fixed it by symlinking since I already had those packages all I had todo was remove the systemd package, reinstall the artix ones  and symlink and that fixed it. I already have my pacman.conf  set correctly as you said above  I just must of accidentally installed lib32-systemd by mistake early on and just not realize it until now.