Skip to main content ↑ ↓
Topic: Install Armtix on Pinephone (Read 769 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Install Armtix on Pinephone

I saw it in the Armtix wiki "List of devices known to work", but the link is broken.

It has Arch Linux ARM support:
Quote
(Unofficial) Arch Linux ARM with choice of Phosh UI, Plasma Mobile, sxmo or barebones. Currently being maintained by the DanctNIX community (GitHub: https://github.com/DanctNIX/danctnix, https://github.com/dreemurrs-embedded/Pine64-Arch).

There is also this other version of Arch but it doesn't support this model yet: https://kupfer.gitlab.io/.

https://wiki.pine64.org/wiki/PinePhone:
Quote
The PinePhone will automatically boot from microSD if a bootable card is inserted. Although it is technically possible to use any ARM distribution (because the PinePhone uses the mainline kernel), there are a few that are designed specifically for mobile use on devices like the PinePhone.

Maybe I can help and we can have some support from Artix devs or even official support.

Is there a general guide?
Should I try to install it?
Because maybe if lucky it will just boot but it will be unusable.

I was thinking to use this image: armtix-dinit-20230101.tar.xz.

Re: Install Armtix on Pinephone

Reply #1 –
I checked: List of devices known to work
The website loaded for me and this was the content:
Quote
   List of devices known to work

    Firefly RK3399
    Odroid N2
    Orange Pi PC2
    Pinephone (draft)
    Qemu VM
    Raspberry Pi 4 8Gb

If your device is not listed here, it doesn't mean it won't work. Devices based on Rockchip and Allwinner SoCs are well supported by mainline kernel and u-boot, so you can expect them to work similarly as Firefly RK3399 and Orange Pi PC2 listed above. In other cases you can try to adapt instructions for other distros with our images.

Re: Install Armtix on Pinephone

Reply #2 –
Quote from: kiblaster – on
Is there a general guide?
Usually installation consists only of storage device(s) partitioning, u-boot flashing (and maybe building) and unpacking rootfs archive to storage device. You also have to create u-boot configuration to boot your kernel
ARMtix