Skip to main content ↑ ↓
Topic: CPU above 50% on idle and fans always running (HP + Artix qt) (Read 360 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

CPU above 50% on idle and fans always running (HP + Artix qt)

Hello guys,
I've just installed Artix Community qt edition on my HP laptop (intel, 8G RAM, from 2017).
After the clean install, no software added, the fans are always running loud 100% of the time, and CPU is always above 50% on idle, the computer is always extremelly hot and battery life obviously sucks a lot.

Main processes using processor:
Kwin_X11 (20%), picom (10%), plasma-systemonitor (5%)

Can anyone help me out reducing processor / fan activity?

Here's my inxi, thanks!

System:
  Kernel: 6.2.11-artix1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    Desktop: KDE Plasma v: 5.27.4 Distro: Artix Linux base: Arch Linux
Machine:
  Type: Convertible System: HP product: HP Spectre x360 Convertible 13-ac0XX
    v: N/A serial: <superuser required>
  Mobo: HP model: 827E v: 94.55 serial: <superuser required>
    UEFI: American Megatrends v: F.23 date: 04/13/2017
Battery:
  ID-1: BAT0 charge: 30.1 Wh (59.6%) condition: 50.5/50.5 Wh (100.0%)
    volts: 11.3 min: 11.6 model: Hewlett-Packard Primary status: discharging
  Device-1: hid-0018:04F3:22E2.0001-battery model: ELAN0732:00 04F3:22E2
    charge: N/A status: N/A
CPU:
  Info: dual core model: Intel Core i7-7500U bits: 64 type: MT MCP
    arch: Amber/Kaby Lake note: check rev: 9 cache: L1: 128 KiB L2: 512 KiB
    L3: 4 MiB
  Speed (MHz): avg: 2700 min/max: 400/3500 cores: 1: 2700 2: 2700 3: 2700
    4: 2700 bogomips: 23209
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel HD Graphics 620 vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-9.5 bus-ID: 00:02.0
  Device-2: Suyin HP TrueVision FHD RGB-IR type: USB driver: uvcvideo
    bus-ID: 1-5:2
  Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1 driver: X:
    loaded: intel unloaded: fbdev,modesetting,vesa dri: i965 gpu: i915
    resolution: 1600x900
  API: OpenGL v: 4.6 Mesa 23.0.2 renderer: Mesa Intel HD Graphics 620 (KBL
    GT2) direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
  API: ALSA v: k6.2.11-artix1-1 status: kernel-api
  Server-1: sndiod v: N/A status: off
  Server-2: JACK v: 1.9.22 status: off
  Server-3: PipeWire v: 0.3.69 status: off
  Server-4: PulseAudio v: 16.1 status: active
Network:
  Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel
    bus-ID: 01:00.0
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 1-7:3
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Drives:
  Local Storage: total: 238.47 GiB used: 16.55 GiB (6.9%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLW256HEHP-000H1
    size: 238.47 GiB temp: 32.9 C
Partition:
  ID-1: / size: 195.31 GiB used: 16.55 GiB (8.5%) fs: btrfs
    dev: /dev/nvme0n1p3
  ID-2: /boot/efi size: 511 MiB used: 608 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1
  ID-3: /home size: 195.31 GiB used: 16.55 GiB (8.5%) fs: btrfs
    dev: /dev/nvme0n1p3
  ID-4: /var/log size: 195.31 GiB used: 16.55 GiB (8.5%) fs: btrfs
    dev: /dev/nvme0n1p3
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 62.0 C pch: 48.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 241 Uptime: 20m Memory: 7.64 GiB used: 2.85 GiB (37.3%)
  Init: OpenRC runlevel: default Compilers: gcc: 12.2.1 Packages: 1638
  Shell: fish v: 3.6.1 inxi: 3.3.26

Re: CPU above 50% on idle and fans always running (HP + Artix qt)

Reply #1 –
now this doesn't fix the issue you're having with that community edition, but, if you know what desktop you want to use then personally i'd install that (one of the stable builds) and build up what you want, rather than using a community ed. that loads more than you'll probably want in the first place.

Re: CPU above 50% on idle and fans always running (HP + Artix qt)

Reply #2 –
Imho Kde plasma may be culprit
use Xfce, Imho much better

Try liquorix, eg. mine here,
Kernel: 6.0.9-lqx1-2-lqx
is likely bit efficient

cross check running it at lower or lowest fre. Hertz ? if gives help, the H/W not suitable to run customarily in high Hz
 

Re: CPU above 50% on idle and fans always running (HP + Artix qt)

Reply #3 –
Quote from: miguelbenoliel – on
Main processes using processor:
Kwin_X11 (20%), picom (10%), plasma-systemonitor (5%)

I don`t know why you use both Kwin and picom at the same time.
Kwin should also be a compositor so picom should not be required.
I would try to stop picom and see the results.