Skip to main content
Topic: [Q] iBus on Plasma/Wayland always dead (Read 431 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.

[Q] iBus on Plasma/Wayland always dead

This is quite annoying which i require Eastern inputs for almost always
Which goes dead for 4 days afterb being rebooted over and over plus being reinstalled over and over
This never even happened that long for my whole Artix life over already a few years
$ ibus-daemon
Code: [Select]
Could not start the default configs program
/etc/environment
Code: [Select]
GDK_BACKEND=x11
GTK_IM_MODULE=ibus
HISTFILESIZE=0
HISTIGNORE=*
HISTSIZE=0
KWIN_FORCE_SW_CURSOR=1
LANG="en_GB.UTF-8"
LANGUAGE="en_GB.UTF-8"
LC_ADDRESS="en_GB.UTF-8"
LC_ALL="en_GB.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_CTYPE="en_GB.UTF-8"
LC_IDENTIFICATION="en_GB.UTF-8"
LC_MEASUREMENT="en_GB.UTF-8"
LC_MESSAGES="en_GB.UTF-8"
LC_MONETARY="en_GB.UTF-8"
LC_NAME="en_GB.UTF-8"
LC_NUMERIC="en_GB.UTF-8"
LC_PAPER="en_GB.UTF-8"
LC_TELEPHONE="en_GB.UTF-8"
LC_TIME="en_GB.UTF-8"
MAGICK_THREAD_LIMIT=6
QT_IM_MODULE=ibus
QT_QPA_PLATFORMTHEME=qt6ct
SAVEHIST=0
TDEWM=openbox
XMODIFIERS=@im=ibus
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

Re: [Q] iBus on Plasma/Wayland always dead

Reply #1
Code: [Select]
% ibus-setup
(ibus-setup:19268): IBUS-WARNING **: 19:34:59.097: Unable to connect to ibus: Error receiving data: Connection reset by peer
(ibus-setup:19268): Gdk-CRITICAL **: 19:35:04.248: gdk_wayland_window_set_dbus_properties_libgtk_only: assertion 'GDK_IS_WAYLAND_WINDOW (window)' failed
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

Re: [Q] iBus on Plasma/Wayland always dead

Reply #2
Those are the installed packages for Wayland and iBus
Code: [Select]
world/gtk-layer-shell 0.8.1-1 [installed]
world/kwayland 5.108.0-1 [kf5] [installed]
world/kwayland-integration 5.27.6-1 [plasma] [installed]
world/layer-shell-qt 5.27.6-1 [plasma] [installed]
world/libdecor 0.1.1-2 [installed]
world/libva 2.18.0-1 [installed]
world/plasma-wayland-protocols 1.10.0-1 [installed]
world/plasma-wayland-session 5.27.6-2.1 [installed]
world/qt5-wayland 5.15.10+kde+r51-1 [qt qt5] [installed]
world/qt6-wayland 6.5.1-1 [qt6] [installed]
world/sddm 0.20.0-1.1 [installed]
world/swaylock 1.7.2-1 [installed]
world/wayland 1.22.0-1 [installed]
world/wayland-protocols 1.31-1 [installed]
world/wayland-utils 1.2.0-1 [installed]
world/xorg-xwayland 23.1.2-1 [xorg] [installed]
extra/gtk-layer-shell 0.8.1-1 [installed]
extra/kwayland 5.107.0-1 [kf5] [installed: 5.108.0-1]
extra/kwayland-integration 5.27.6-1 [plasma] [installed]
extra/layer-shell-qt 5.27.6-1 [plasma] [installed]
extra/libdecor 0.1.1-2 [installed]
extra/libva 2.18.0-1 [installed]
extra/plasma-wayland-protocols 1.10.0-1 [installed]
extra/plasma-wayland-session 5.27.6-2 [installed: 5.27.6-2.1]
extra/qt5-wayland 5.15.10+kde+r51-1 [qt qt5] [installed]
extra/qt6-wayland 6.5.1-1 [qt6] [installed]
extra/sddm 0.20.0-1 [installed: 0.20.0-1.1]
extra/swaylock 1.7.2-1 [installed]
extra/wayland 1.22.0-1 [installed]
extra/wayland-protocols 1.31-1 [installed]
extra/wayland-utils 1.2.0-1 [installed]
extra/waylock 0.6.2-1 [installed]
extra/xorg-xwayland 23.1.2-1 [xorg] [installed]
aur/aurora-compositor-git r4125.6c650ed5-1 [installed] [3 Jan 2023]
aur/aurora-client-git r105.a462da0-1 [installed] [3 Jan 2023]
aur/wlanthy-git r44.19ccdb7-1 [installed] [25 Apr 2021]
system/libusb 1.0.26-2 [installed]
world/hidapi 0.14.0-1.1 [installed]
world/ibus 1.5.28-4 [installed]
world/libgusb 0.4.6-1 [installed]
world/libibus 1.5.28-4 [installed]
world/libusb-compat 0.1.8-1 [installed]
world/libusbmuxd 2.0.2-3 [installed]
extra/hidapi 0.14.0-1 [installed: 0.14.0-1.1]
extra/ibus 1.5.28-4 [installed]
extra/ibus-anthy 1.5.14-2 [installed]
extra/ibus-table 1.17.0-2 [installed]
extra/ibus-table-chinese 1.8.12-1 [installed]
extra/libgusb 0.4.6-1 [installed]
extra/libibus 1.5.28-4 [installed]
extra/libusb-compat 0.1.8-1 [installed]
extra/libusbmuxd 2.0.2-3 [installed]
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

 

Re: [Q] iBus on Plasma/Wayland always dead

Reply #3
Do you have TDE installed on that same machine by any chance, because i don't see anything related to ibus in the plasma pkg. group.
Maybe it replaces something of plasma.

Re: [Q] iBus on Plasma/Wayland always dead

Reply #4
Yes i have Trinity installed used as an X11 fallback when Wayland is dead and has to be fixed thru such an X11 fallback like Trinity
But Plasma/Wayland itself is working, just sth about to be run w/in Plasma/Wayland doesn’t function
Do you have TDE installed on that same machine by any chance, because i don't see anything related to ibus in the plasma pkg. group.
Maybe it replaces something of plasma.
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

Re: [Q] iBus on Plasma/Wayland always dead

Reply #5
I’m back with Trinity, but doesn't take any effect and the iBus error makes no difference
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

Re: [Q] iBus on Plasma/Wayland always dead

Reply #6
Oh yeah there might not be any conflict with Trinity at all, i started with the last because of a confusion with what they do :)

Try to start ibus-daemon with -rx/-rxR arguments, there is also this small package in aur https://aur.archlinux.org/cgit/aur.git/tree/PKGBUILD?h=ibus-autostart, you can check if that file in autostart exists and make it yourself if it doesn't

Also if you need to just switch keyboard layouts there are way easier ways to do it.

Re: [Q] iBus on Plasma/Wayland always dead

Reply #7
ibus-daemon -Rrx and ibus-daenon -rx don’t react but only ibus-daenon -Rdrx reacts w/o outputs
What i expect is just ibus-daemon to react with an iBus setup icon lik before
Though iBus is no conflict from Trinity, but my issue is system wide, even though w/o graphics just text TTY iBus still entirely doesn’t react
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen

Re: [Q] iBus on Plasma/Wayland always dead

Reply #8
I have a backup Artix w/o ‘‘XIM’’ lines added to /etc/environment, but were added to the main Artix and removed recently
Hopes that everything iBus backs to the normal :)
:) AMD APU R4750G Zen2 Lucienne-G GCN Vega8 :) ASRock DeskMini X300 AMD edition :) (14.9+46.9)GiB SoDiMM DDR4 RAM’s
:) Samsung 990PRO HS NVMe SSD 3.63TiB (nda0; with 2.61TiB ZPool) :) Kingston NV2 NVMe SSD 3.63TiB (nvme1n1; with 2.7TiB ZPool)
:) Samsung 860QVO 2.5’’ SSD 3.63TiB (sda; with 2.1TiB ZPool) :) Transcend 220Q 2.5’’ SSD 1.82TiB (sdb; with 1.29TiB ZPool)
:) Intehill 4K UHD LED-IGZo screen