Skip to main content ↑ ↓
Topic solved
This topic has been marked as solved and requires no further attention.
Topic: [SOLVED ] Errors after first Install xfce-openrc (Read 836 times) previous topic - next topic
0 Members and 2 Guests are viewing this topic.

[SOLVED ] Errors after first Install xfce-openrc

Hallo,

yersterday I made a complete new Install with Iso artix-xfce-openrc-20210426-x86_64.iso
At first I disabled "community" and "extra" from Arch, and enabled universe and lib32 (Artix)
Then I run sudo pacman -Sy and -Syu

I have the following error.log
I am not able to understand and don't know what to do.
Please can you help me?


Code: [Select]
Jun 18 12:42:34 xmg lightdm[2637]: pam_unix(lightdm-autologin:auth): conversation failed
Jun 18 12:42:42 xmg lightdm[2638]: pam_elogind(lightdm-greeter:session): Failed to release session: No session 'c1' known
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Jun 18 12:42:45 xmg kernel: nvkm: mm not clean!
Jun 18 12:42:45 xmg kernel: nvkm: node list:
Jun 18 12:42:45 xmg kernel: nvkm: \x0900000000 00002000 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002000 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002018 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002020 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002038 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002040 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002058 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002060 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002078 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002080 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002098 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020a0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020b8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020c0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020d8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020e0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020f8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002100 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002118 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002120 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002138 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002140 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002158 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002160 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002178 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002180 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002198 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021a0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021b8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021c0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021d8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021e0 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021f8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002200 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002218 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002220 00000018 1
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002238 0000ddc8 0
Jun 18 12:42:45 xmg kernel: nvkm: free list:
Jun 18 12:42:45 xmg kernel: nvkm: \x0900000000 00002000 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002018 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002038 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002058 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002078 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002098 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020b8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020d8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000020f8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002118 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002138 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002158 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002178 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002198 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021b8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021d8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x09000021f8 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002218 00000008 0
Jun 18 12:42:45 xmg kernel: nvkm: \x0900002238 0000ddc8 0
Jun 18 12:42:45 xmg syslog-ng[2181]: I/O error occurred while reading; fd='12', error='Broken pipe (32)'
Jun 18 12:42:45 xmg syslog-ng[2181]: I/O error occurred while reading; fd='26', error='Broken pipe (32)'
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: fb: Falcon mem scrubbing timeout
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: fb: Falcon mem scrubbing timeout
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: fb: VPR still locked after scrub!
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: fb: init failed, -5
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: init failed with -5
Jun 18 12:42:45 xmg kernel: nouveau: Xorg[2272]:00000000:00000080: init failed with -5
Jun 18 12:42:45 xmg kernel: nouveau: DRM-master:00000000:00000000: init failed with -5
Jun 18 12:42:45 xmg kernel: nouveau: DRM-master:00000000:00000000: init failed with -5
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: DRM: Client resume failed with error: -5
Jun 18 12:42:45 xmg kernel: nouveau 0000:01:00.0: DRM: resume failed with: -5

Thanks TM
CPU: AMD Ryzen 7 4800H
GPU: NVIDIA GeForce GTX 1650 Ti mobile
loaded: amdgpu,ati,modesetting,nouveau
Kernel: up to date
DM: Xfce
 

Re: Errors after first Install xfce-openrc

Reply #2 –
Quote from: Thats_me – on
CPU: AMD Ryzen 7 4800H
GPU: NVIDIA GeForce GTX 1650 Ti mobile
loaded: amdgpu,ati,modesetting,nouveau
Kernel: 5.12.10-artix1-1
DM: Xfce
Why are you using ATI driver (and nouveau) with NVIDIA?

After checking alium's link, read this: https://wiki.archlinux.org/title/NVIDIA#Installation

https://nouveau.freedesktop.org/CodeNames.html
Quote
NV168 (TU116)   GeForce GTX (1650 Super, 1660, 1660 Ti, 1660 Super)

Re: Errors after first Install xfce-openrc

Reply #3 –
Thank you straider

Quote from: strajder – on
Why are you using ATI driver (and nouveau) with NVIDIA?

This was the Standard Install (complete new xfce-openrc Install with graphic installer).
I wanted to wait with install of nVidia because often this cards makes Problems and want first look for Informations how to install nVidia drivers and if my special card is supported in Artix Repos.
As far as I know the nonfree drivers for amd graphic card run without problems.


Before I also looked to find out if there are errors which I have to note and eliminate before I do further installations.
Sometimes in logs are shown errors which are not relevant. For practiced linux Users it is more easy to detect this with a short look.
Therefore I had the courage to ask a general question.

Also it is not easy for me to research. Arch (systemd) is total different to Artix. But often here people refer to Arch Wiki. Sometimes it is said, don't look to Arch, Artix is not Arch. And the Artix Wiki is not very extensive, so for me it ist difficult to know what can I use from Arch and what not.

So I will try to install nvidia drivers and look forward if I get help, when I have problems and don't understand everything from wiki and research. Despite translation In english it is hard for me to understand every thing.

Thx TM
CPU: AMD Ryzen 7 4800H
GPU: NVIDIA GeForce GTX 1650 Ti mobile
loaded: amdgpu,ati,modesetting,nouveau
Kernel: up to date
DM: Xfce

Re: Errors after first Install xfce-openrc

Reply #4 –
Only things which are different than Arch are contained in the Artix wiki. Everything else is pretty much the same or similar, that's why you should mostly refer to Arch wiki.

From the user's point of view, things which are different are only the commands which deal with services/daemons. They also differ across init systems supported by Artix - openrc, runit, s6, 66.  Kernel modules (like graphics card drivers) are loaded by kernel and generally not related to the init system.

You should be cautious of packages from the Arch repositories, which are not guaranteed to work with Artix - always prefer Artix repositories.

Re: Errors after first Install xfce-openrc

Reply #5 –
installing proper driver for your GK will fix your problem.