Artix Linux Forum

System:    Host: rps-server Kernel: 4.14.78-1-lts x86_64 bits: 64 gcc: 8.2.1 Desktop: dwm 6.1
           Distro: Artix Linux ()
Machine:   Device: desktop Mobo: ASUSTeK model: PRIME A320M-K v: Rev X.0x serial: <filter>
           UEFI: American Megatrends v: 4023 date: 08/20/2018
CPU:       6 core AMD Ryzen 5 1600 Six-Core (-MT-MCP-) arch: Zen rev.1 cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 38327
           clock speeds: max: 3200 MHz 1: 1539 MHz 2: 1466 MHz 3: 1373 MHz 4: 1374 MHz 5: 1374 MHz 6: 1373 MHz
           7: 1374 MHz 8: 1371 MHz 9: 1373 MHz 10: 1371 MHz 11: 1374 MHz 12: 1372 MHz
Memory:    Array-1 capacity: 256 GB (check) devices: 2 EC: None
           Device-1: DIMM_A1 size: 8 GB speed: 2666 MT/s type: DDR4 part: BLS8G4D26BFSBK.8FD
           Device-2: DIMM_B1 size: 8 GB speed: 2666 MT/s type: DDR4 part: BLS8G4D26BFSBK.8FD
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Lexa PRO [Radeon RX 550/550X] bus-ID: 07:00.0
           Display Server: X.Org 1.20.2 drivers: ati,amdgpu (unloaded: modesetting)
           Resolution: [email protected]
           OpenGL: renderer: Radeon RX 550 Series (POLARIS12, DRM 3.19.0, 4.14.78-1-lts, LLVM 7.0.0)
           version: 4.5 Mesa 18.2.3 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
           driver: snd_hda_intel bus-ID: 09:00.3
           Card-2 Advanced Micro Devices [AMD/ATI] Device aae0 driver: snd_hda_intel bus-ID: 07:00.1
           Sound: Advanced Linux Sound Architecture v: k4.14.78-1-lts
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: f000 bus-ID: 05:00.0
           IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2120.4GB (17.9% used)
           ID-1: /dev/sda model: PH6 size: 120.0GB temp: 33C
           ID-2: /dev/sdb model: WDC_WD20PURZ size: 2000.4GB temp: 36C
Partition: ID-1: / size: 112G used: 34G (31%) fs: btrfs dev: /dev/sda2
           ID-2: /home size: 20G used: 11G (59%) fs: ext4 dev: /dev/dm-3
Sensors:   System Temperatures: cpu: 43.0C mobo: 35.0C gpu: 38.0
           Fan Speeds (in rpm): cpu: 0 fan-1: 1136 fan-2: 0
Info:      Processes: 304 Uptime: 1:06 Memory: 1411.4/16041.9MB Init: N/A Gcc sys: 8.2.1
           Client: Shell (sudo) inxi: 2.3.56

[ruben@flatbush ~]$ sudo inxi -Fxzmc0
[sudo] password for ruben: 
System:
  Host: flatbush Kernel: 4.20.12-artix1-1-ARTIX x86_64 bits: 64 
  compiler: gcc v: 8.2.1 Console: tty 11 Distro: Artix rolling 
Machine:
  Type: Desktop System: HP product: HP Z240 Tower Workstation v: N/A 
  serial: <filter> 
  Mobo: HP model: 802F serial: <filter> UEFI: HP v: N51 Ver. 01.63 
  date: 10/05/2017 
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M510 
  charge: 55% (should be ignored) status: Discharging 
Memory:
  RAM: total: 31.21 GiB used: 4.13 GiB (13.2%) 
  Array-1: capacity: 64 GiB slots: 4 EC: None max module size: 16 GiB 
  note: est. 
  Device-1: DIMM4 size: 8 GiB speed: 2133 MT/s type: DDR4 
  Device-2: DIMM3 size: 8 GiB speed: 2133 MT/s type: DDR4 
  Device-3: DIMM2 size: 8 GiB speed: 2133 MT/s type: DDR4 
  Device-4: DIMM1 size: 8 GiB speed: 2133 MT/s type: DDR4 
CPU:
  Topology: Quad Core model: Intel Core i7-6700 bits: 64 type: MT MCP 
  arch: Skylake-S rev: 3 L2 cache: 8192 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 54544 
  Speed: 801 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 840 2: 840 
  3: 863 4: 884 5: 840 6: 838 7: 820 8: 840 
Graphics:
  Device-1: Intel HD Graphics 530 driver: i915 v: kernel bus ID: 00:02.0 
  Display: server: X.Org 1.20.4 driver: intel 
  unloaded: fbdev,modesetting,vesa tty: N/A 
  OpenGL: renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2) 
  v: 4.5 Mesa 18.3.4 direct render: Yes 
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio 
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
  Sound Server: ALSA v: k4.20.12-artix1-1-ARTIX 
Network:
  Device-1: Intel Ethernet I219-LM driver: e1000e v: 3.2.6-k port: efa0 
  bus ID: 00:1f.6 
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:
  Local Storage: total: 3.65 TiB used: 755.41 GiB (20.2%) 
  ID-1: /dev/sda vendor: Toshiba model: DT01ACA100 size: 931.51 GiB 
  ID-2: /dev/sdb type: USB vendor: Toshiba model: DT01ACA300 size: 2.73 TiB 
  ID-3: /dev/sdd type: USB vendor: Kingston model: FCR-HS219 1 
  size: 14.84 GiB 
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 
  bus ID: 00:17.0 
Partition:
  ID-1: / size: 881.81 GiB used: 755.20 GiB (85.6%) fs: ext4 dev: /dev/sda2 
  ID-2: swap-1 size: 34.33 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 
Sensors:
  System Temperatures: cpu: 51.5 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 230 Uptime: 2d 23h 40m Init: N/A rc: OpenRC v: 0.41.2 
  runlevel: default Compilers: gcc: 8.2.1 clang: 7.0.1 Shell: bash v: 5.0.0 
  inxi: 3.0.26