Skip to main content ↑ ↓
Topic: Artix installation (Read 4171 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: Artix installation

Reply #15 –
Quote from: Dudemanguy – on
This is because s6 has an early getty that starts before the service-manager. If you login really fast (which was always possible), you can login before services start (which includes mounting drives). It doesn't have anything to do with display managers or not. The rule of thumb is to just wait until udev is done (the screen flickers).

Just for completeness sake, this behavior has actually just been changed. I've noticed some s6 users seem to get confused by the early getty. I like it since it is a good fallback in case something goes wrong in s6-rc (i.e. you screw up the database), but it opens up the possibility to "log in too fast". There's a relatively easy "best of both worlds" approach to this though. Now, the default bundle includes a oneshot service that brings down the s6-linux-early getty service with an s6 command. Instead, agetty-tty1 spawns tty1 over it after filesystems mount. Basically, when s6-rc starts, the original early getty gets killed and s6-rc takes it over. AKA, it should be basically impossible to log in "too early" now.

Re: Artix installation

Reply #16 –
Test install artix-xfce-s6-20201222-x86_64.iso
Dell Inspiron1545
On 4 partitions, /(f2fs), /home(ext4), /var(ext4) and /boot(ext2)
Installation successful, boot fails.
Xorg.0.log on /var partition
Code: [Select]
[   128.157] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   128.157] 
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[   128.158] Build Operating System: Linux Artix Linux
[   128.158] Current Operating System: Linux Inspiron 5.9.14-artix1-1 #1 SMP PREEMPT Sat, 12 Dec 2020 22:57:38 +0000 x86_64
[   128.158] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=21c480bd-262c-41b1-8799-9f704103cb83 rw net.ifnames=0 quiet
[   128.158] Build Date: 14 December 2020  12:57:17PM
[   128.158]  
[   128.158] Current version of pixman: 0.40.0
[   128.158] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   128.158] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   128.158] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 22 07:29:31 2020
[   128.158] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   128.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   128.158] (==) No Layout section.  Using the first Screen section.
[   128.158] (==) No screen section available. Using defaults.
[   128.158] (**) |-->Screen "Default Screen Section" (0)
[   128.158] (**) |   |-->Monitor "<default monitor>"
[   128.159] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   128.159] (==) Automatically adding devices
[   128.159] (==) Automatically enabling devices
[   128.159] (==) Automatically adding GPU devices
[   128.159] (==) Automatically binding GPU devices
[   128.159] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   128.159] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   128.159] 	Entry deleted from font path.
[   128.159] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   128.159] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[   128.159] 	Entry deleted from font path.
[   128.159] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[   128.159] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   128.159] 	Entry deleted from font path.
[   128.159] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   128.159] 	Entry deleted from font path.
[   128.159] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   128.159] 	Entry deleted from font path.
[   128.159] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   128.159] 	Entry deleted from font path.
[   128.159] (==) FontPath set to:
	
[   128.159] (==) ModulePath set to "/usr/lib/xorg/modules"
[   128.159] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   128.159] (II) Module ABI versions:
[   128.159] 	X.Org ANSI C Emulation: 0.4
[   128.159] 	X.Org Video Driver: 24.1
[   128.159] 	X.Org XInput driver : 24.1
[   128.159] 	X.Org Server Extension : 10.0
[   128.160] (++) using VT number 7

[   128.160] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   128.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[   128.161] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[   128.168] (--) PCI:*(0@0:2:0) 8086:2a42:1028:02aa rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000efe8/8, BIOS @ 0x????????/131072
[   128.168] (--) PCI: (0@0:2:1) 8086:2a43:1028:02aa rev 7, Mem @ 0xf6b00000/1048576
[   128.168] (II) Open ACPI successful (/var/run/acpid.socket)
[   128.168] (II) LoadModule: "glx"
[   128.169] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   128.172] (II) Module glx: vendor="X.Org Foundation"
[   128.172] 	compiled for 1.20.10, module version = 1.0.0
[   128.172] 	ABI class: X.Org Server Extension, version 10.0
[   128.172] (==) Matched intel as autoconfigured driver 0
[   128.172] (==) Matched modesetting as autoconfigured driver 1
[   128.172] (==) Matched fbdev as autoconfigured driver 2
[   128.172] (==) Matched vesa as autoconfigured driver 3
[   128.172] (==) Assigned the driver to the xf86ConfigLayout
[   128.172] (II) LoadModule: "intel"
[   128.173] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   128.173] (II) Module intel: vendor="X.Org Foundation"
[   128.173] 	compiled for 1.20.9, module version = 2.99.917
[   128.173] 	Module class: X.Org Video Driver
[   128.173] 	ABI class: X.Org Video Driver, version 24.1
[   128.173] (II) LoadModule: "modesetting"
[   128.174] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   128.175] (II) Module modesetting: vendor="X.Org Foundation"
[   128.175] 	compiled for 1.20.10, module version = 1.20.10
[   128.175] 	Module class: X.Org Video Driver
[   128.175] 	ABI class: X.Org Video Driver, version 24.1
[   128.175] (II) LoadModule: "fbdev"
[   128.175] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   128.175] (II) Module fbdev: vendor="X.Org Foundation"
[   128.175] 	compiled for 1.20.8, module version = 0.5.0
[   128.175] 	Module class: X.Org Video Driver
[   128.175] 	ABI class: X.Org Video Driver, version 24.1
[   128.175] (II) LoadModule: "vesa"
[   128.175] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   128.175] (II) Module vesa: vendor="X.Org Foundation"
[   128.175] 	compiled for 1.20.9, module version = 2.5.0
[   128.175] 	Module class: X.Org Video Driver
[   128.175] 	ABI class: X.Org Video Driver, version 24.1
[   128.176] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   128.176] (II) intel: Driver for Intel(R) HD Graphics
[   128.176] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   128.176] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   128.176] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   128.176] (II) FBDEV: driver for framebuffer: fbdev
[   128.176] (II) VESA: driver for VESA chipsets: vesa
[   128.177] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200715
[   128.177] (II) intel(0): SNA compiled from 2.99.917-913-g9236c582
[   128.194] (WW) Falling back to old probe method for modesetting
[   128.194] (WW) Falling back to old probe method for fbdev
[   128.194] (II) Loading sub module "fbdevhw"
[   128.194] (II) LoadModule: "fbdevhw"
[   128.194] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   128.194] (II) Module fbdevhw: vendor="X.Org Foundation"
[   128.194] 	compiled for 1.20.10, module version = 0.0.2
[   128.195] 	ABI class: X.Org Video Driver, version 24.1
[   130.507] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[   130.507] (II) intel(0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[   130.507] (II) intel(0): [drm]              command   pid dev master a   uid      magic
[   130.507] (II) intel(0): [drm]                 Xorg   696   0   y    y     0          0
[   130.507] (II) intel(0): [drm]                 Xorg  1326   0   n    y     0          0
[   130.507] (EE) intel(0): Failed to claim DRM device.
[   130.507] (II) UnloadModule: "intel"
[   130.507] (EE) Screen(s) found, but none have a usable configuration.
[   130.507] (EE) 
Fatal server error:
[   130.508] (EE) no screens found(EE) 
[   130.508] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   130.508] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   130.508] (EE) 
[   130.522] (EE) Server terminated with error (1). Closing log file.

Xorg.0.log on /(root) partition: in /var/log folder
Code: [Select]
[    25.892] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    25.892] 
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[    25.892] Build Operating System: Linux Artix Linux
[    25.892] Current Operating System: Linux Inspiron 5.9.14-artix1-1 #1 SMP PREEMPT Sat, 12 Dec 2020 22:57:38 +0000 x86_64
[    25.892] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=21c480bd-262c-41b1-8799-9f704103cb83 rw net.ifnames=0 quiet
[    25.893] Build Date: 14 December 2020  12:57:17PM
[    25.893]  
[    25.893] Current version of pixman: 0.40.0
[    25.893] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    25.893] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.893] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 22 07:27:49 2020
[    25.893] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.893] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.893] (==) No Layout section.  Using the first Screen section.
[    25.893] (==) No screen section available. Using defaults.
[    25.893] (**) |-->Screen "Default Screen Section" (0)
[    25.893] (**) |   |-->Monitor "<default monitor>"
[    25.893] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    25.893] (==) Automatically adding devices
[    25.893] (==) Automatically enabling devices
[    25.893] (==) Automatically adding GPU devices
[    25.893] (==) Automatically binding GPU devices
[    25.893] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    25.893] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[    25.893] 	Entry deleted from font path.
[    25.893] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[    25.893] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    25.894] 	Entry deleted from font path.
[    25.894] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    25.894] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    25.894] 	Entry deleted from font path.
[    25.894] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    25.894] 	Entry deleted from font path.
[    25.894] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    25.894] 	Entry deleted from font path.
[    25.894] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    25.894] 	Entry deleted from font path.
[    25.894] (==) FontPath set to:
	
[    25.894] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.894] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.894] (II) Module ABI versions:
[    25.894] 	X.Org ANSI C Emulation: 0.4
[    25.894] 	X.Org Video Driver: 24.1
[    25.894] 	X.Org XInput driver : 24.1
[    25.894] 	X.Org Server Extension : 10.0
[    25.895] (++) using VT number 7

[    25.895] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    25.895] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.895] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    25.900] (--) PCI:*(0@0:2:0) 8086:2a42:1028:02aa rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000efe8/8, BIOS @ 0x????????/131072
[    25.939] (--) PCI: (0@0:2:1) 8086:2a43:1028:02aa rev 7, Mem @ 0xf6b00000/1048576
[    25.939] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    25.939] (II) LoadModule: "glx"
[    25.940] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.942] (II) Module glx: vendor="X.Org Foundation"
[    25.942] 	compiled for 1.20.10, module version = 1.0.0
[    25.942] 	ABI class: X.Org Server Extension, version 10.0
[    25.942] (==) Matched intel as autoconfigured driver 0
[    25.942] (==) Matched modesetting as autoconfigured driver 1
[    25.942] (==) Matched fbdev as autoconfigured driver 2
[    25.942] (==) Matched vesa as autoconfigured driver 3
[    25.942] (==) Assigned the driver to the xf86ConfigLayout
[    25.942] (II) LoadModule: "intel"
[    25.942] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.942] (II) Module intel: vendor="X.Org Foundation"
[    25.942] 	compiled for 1.20.9, module version = 2.99.917
[    25.942] 	Module class: X.Org Video Driver
[    25.942] 	ABI class: X.Org Video Driver, version 24.1
[    25.942] (II) LoadModule: "modesetting"
[    25.942] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.943] (II) Module modesetting: vendor="X.Org Foundation"
[    25.943] 	compiled for 1.20.10, module version = 1.20.10
[    25.943] 	Module class: X.Org Video Driver
[    25.943] 	ABI class: X.Org Video Driver, version 24.1
[    25.943] (II) LoadModule: "fbdev"
[    25.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.943] (II) Module fbdev: vendor="X.Org Foundation"
[    25.943] 	compiled for 1.20.8, module version = 0.5.0
[    25.943] 	Module class: X.Org Video Driver
[    25.943] 	ABI class: X.Org Video Driver, version 24.1
[    25.943] (II) LoadModule: "vesa"
[    25.944] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.944] (II) Module vesa: vendor="X.Org Foundation"
[    25.944] 	compiled for 1.20.9, module version = 2.5.0
[    25.944] 	Module class: X.Org Video Driver
[    25.944] 	ABI class: X.Org Video Driver, version 24.1
[    25.944] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    25.944] (II) intel: Driver for Intel(R) HD Graphics
[    25.944] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    25.944] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    25.944] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.944] (II) FBDEV: driver for framebuffer: fbdev
[    25.944] (II) VESA: driver for VESA chipsets: vesa
[    25.944] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    25.944] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200715
[    25.944] (II) intel(0): SNA compiled from 2.99.917-913-g9236c582
[    25.960] (WW) Falling back to old probe method for modesetting
[    25.960] (WW) Falling back to old probe method for fbdev
[    25.960] (II) Loading sub module "fbdevhw"
[    25.960] (II) LoadModule: "fbdevhw"
[    25.960] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.961] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.961] 	compiled for 1.20.10, module version = 0.0.2
[    25.961] 	ABI class: X.Org Video Driver, version 24.1
[    28.154] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[    28.154] (II) intel(0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[    28.154] (II) intel(0): [drm]              command   pid dev master a   uid      magic
[    28.154] (II) intel(0): [drm]                 Xorg   696   0   y    y     0          0
[    28.154] (II) intel(0): [drm]                 Xorg   865   0   n    y     0          0
[    28.154] (II) intel(0): [drm]                 Xorg   878   0   n    y     0          0
[    28.154] (II) intel(0): [drm]                 Xorg  1082   0   n    y     0          0
[    28.154] (EE) intel(0): Failed to claim DRM device.
[    28.154] (II) UnloadModule: "intel"
[    28.154] (EE) Screen(s) found, but none have a usable configuration.
[    28.154] (EE) 
Fatal server error:
[    28.154] (EE) no screens found(EE) 
[    28.154] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    28.154] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    28.154] (EE) 
[    29.070] (EE) Server terminated with error (1). Closing log file.

/var partition
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/20-Var-04/log/
total 92
drwxr-xr-x  9 root root    4096 Dec 22 07:29 .
drwxr-xr-x 13 root root    4096 Dec 21 18:34 ..
drwx------  2 root root    4096 Nov 12 02:18 audit
-rw-r-----  1 root log      202 Dec 22 07:29 auth.log
-rw-r-----  1 root log       66 Dec 22 07:29 crond.log
-rw-r-----  1 root log      797 Dec 22 07:29 daemon.log
drwxr-xr-x  2 git  git     4096 Dec 22 07:27 dmesg
-rw-r-----  1 root log     1232 Dec 22 07:29 everything.log
drwxr-xr-x  2 root root    4096 Apr 18  2020 gssproxy
-rw-r-----  1 root log       77 Dec 22 07:29 kernel.log
drwx--x--x  2 root lightdm 4096 Dec 22 07:29 lightdm
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-monitor
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-pvscan
-rw-r-----  1 root log     1002 Dec 22 07:29 messages.log
drwxr-xr-x  2 root root    4096 Sep  5 13:22 old
-rw-r-----  1 root log      164 Dec 22 07:29 syslog.log
-rw-r-----  1 root log      128 Dec 22 07:29 user.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log.old
-rw-r--r--  1 root root    8023 Dec 22 07:27 Xorg.3.log
Inspiron1545:[sukha]:~/Desktop$

/var/log folder on /(root) partition
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/20-Var-04/log/
total 92
drwxr-xr-x  9 root root    4096 Dec 22 07:29 .
drwxr-xr-x 13 root root    4096 Dec 21 18:34 ..
drwx------  2 root root    4096 Nov 12 02:18 audit
-rw-r-----  1 root log      202 Dec 22 07:29 auth.log
-rw-r-----  1 root log       66 Dec 22 07:29 crond.log
-rw-r-----  1 root log      797 Dec 22 07:29 daemon.log
drwxr-xr-x  2 git  git     4096 Dec 22 07:27 dmesg
-rw-r-----  1 root log     1232 Dec 22 07:29 everything.log
drwxr-xr-x  2 root root    4096 Apr 18  2020 gssproxy
-rw-r-----  1 root log       77 Dec 22 07:29 kernel.log
drwx--x--x  2 root lightdm 4096 Dec 22 07:29 lightdm
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-monitor
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-pvscan
-rw-r-----  1 root log     1002 Dec 22 07:29 messages.log
drwxr-xr-x  2 root root    4096 Sep  5 13:22 old
-rw-r-----  1 root log      164 Dec 22 07:29 syslog.log
-rw-r-----  1 root log      128 Dec 22 07:29 user.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log.old
-rw-r--r--  1 root root    8023 Dec 22 07:27 Xorg.3.log
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/04-Artix.s-01222/var/log/
total 169
drwxr-xr-x 15 root root  3488 Dec 22 07:27 .
drwxr-xr-x  4 root root  3488 Dec 22 07:27 ..
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 acpid
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 bluetoothd
-rw-------  1 root utmp     0 Dec 22 07:27 btmp
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 connmand
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 cronie
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 dbus
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 elogind
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 lightdm
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 lvm2-monitor
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 lvm2-pvscan
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 lvmetad
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 lvmpolld
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 syslog-ng
drwxr-xr-x  2 git  git   3488 Dec 22 07:27 udevd
-rw-rw-r--  1 root utmp     0 Dec 22 07:27 wtmp
-rw-r--r--  1 root root  8157 Dec 22 07:27 Xorg.0.log
-rw-r--r--  1 root root  8304 Dec 22 07:27 Xorg.0.log.old
-rw-r--r--  1 root root 31176 Dec 22 07:29 Xorg.1.log
-rw-r--r--  1 root root  8157 Dec 22 07:27 Xorg.2.log
-rw-r--r--  1 root root  8157 Dec 22 07:27 Xorg.2.log.old
-rw-r--r--  1 root root  8213 Dec 22 07:27 Xorg.3.log
-rw-r--r--  1 root root  8248 Dec 22 07:27 Xorg.3.log.old
-rw-r--r--  1 root root  8304 Dec 22 07:27 Xorg.4.log
-rw-r--r--  1 root root  8304 Dec 22 07:27 Xorg.4.log.old
Inspiron1545:[sukha]:~/Desktop$


These files are of the very first boot attempt.

Re: Artix installation

Reply #17 –
Like before, it looks like elogind somehow isn't started first. Could you post the contents of /var/log/lightdm/current ?

Re: Artix installation

Reply #18 –
Quote from: Dudemanguy – on
Like before, it looks like elogind somehow isn't started first. Could you post the contents of /var/log/lightdm/current ?

the lightdm/current file is too big to post, please find attached file current.txt. this file is in /(root) partition /var/log/lightdm.

/var partition log/lightdm contents:

Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ sudo ls -al /run/media/sukha/20-Var-04/log/lightdm/
[sudo] password for sukha: 
total 28
drwx--x--x 2 root lightdm 4096 Dec 22 07:29 .
drwxr-xr-x 9 root root    4096 Dec 22 07:29 ..
-rw------- 1 root root    3926 Dec 22 07:29 lightdm.log
-rw------- 1 root root    3916 Dec 22 07:29 lightdm.log.old
-rw------- 1 root root    1173 Dec 22 07:29 x-0.log
-rw------- 1 root root    1173 Dec 22 07:29 x-0.log.old
-rw------- 1 root root    1173 Dec 22 07:27 x-3.log



contents of /var/log/lightdm on /(root) partition
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/04-Artix.s-01222/var/log/lightdm/
total 186
drwxr-xr-x  2 git  git    3488 Dec 22 07:27 .
drwxr-xr-x 15 root root   3488 Dec 22 07:27 ..
-rwxr--r--  1 git  git  162745 Dec 22 07:29 current
-rw-------  1 root root   2287 Dec 22 07:27 lightdm.log
-rw-------  1 root root   2287 Dec 22 07:27 lightdm.log.old
-rw-r--r--  1 git  git       0 Dec 22 07:27 lock
-rw-r--r--  1 git  git       0 Dec 22 07:27 state
-rw-------  1 root root   1173 Dec 22 07:27 x-0.log
-rw-------  1 root root   1173 Dec 22 07:27 x-0.log.old
-rw-------  1 root root   1780 Dec 22 07:29 x-1.log
-rw-------  1 root root   1173 Dec 22 07:27 x-2.log
-rw-------  1 root root   1173 Dec 22 07:27 x-2.log.old
-rw-------  1 root root   1173 Dec 22 07:27 x-3.log
-rw-------  1 root root   1173 Dec 22 07:27 x-3.log.old
-rw-------  1 root root   1173 Dec 22 07:27 x-4.log
-rw-------  1 root root   1173 Dec 22 07:27 x-4.log.old

Re: Artix installation

Reply #19 –
There's a couple of strange dbus messages, but yeah lightdm looks fine. The problem is that xorg doesn't start for you.

Quote
[   128.160] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   128.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[   128.161] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied

No access to the /dev/dri/card means no graphics. I have no idea how this is happening however since elogind should be running. I'm going to assume there's a race condition here, but this race actually shouldn't be happening because elogind is a dependency of lightdm. Could you post the contents of /var/log/dbus/current ?
 

Re: Artix installation

Reply #20 –
The dbus current file is in /(root) partition, attached as current-dbus.txt.
There is no dbus folder in /var partition, attaching current file in dmesg folder as current-dmesg.txt.

/(root) partition:
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/04-Artix.s-01222/var/log/dbus/
total 10
drwxr-xr-x  2 git  git  3488 Dec 22 07:27 .
drwxr-xr-x 15 root root 3488 Dec 22 07:27 ..
-rwxr--r--  1 git  git  2318 Dec 22 07:29 current
-rw-r--r--  1 git  git     0 Dec 22 07:27 lock
-rw-r--r--  1 git  git     0 Dec 22 07:27 state


/var partition
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/20-Var-04/log/
total 92
drwxr-xr-x  9 root root    4096 Dec 22 07:29 .
drwxr-xr-x 13 root root    4096 Dec 21 18:34 ..
drwx------  2 root root    4096 Nov 12 02:18 audit
-rw-r-----  1 root log      202 Dec 22 07:29 auth.log
-rw-r-----  1 root log       66 Dec 22 07:29 crond.log
-rw-r-----  1 root log      797 Dec 22 07:29 daemon.log
drwxr-xr-x  2 git  git     4096 Dec 22 07:27 dmesg
-rw-r-----  1 root log     1232 Dec 22 07:29 everything.log
drwxr-xr-x  2 root root    4096 Apr 18  2020 gssproxy
-rw-r-----  1 root log       77 Dec 22 07:29 kernel.log
drwx--x--x  2 root lightdm 4096 Dec 22 07:29 lightdm
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-monitor
drwxr-xr-x  2 git  git     4096 Dec 22 07:29 lvm2-pvscan
-rw-r-----  1 root log     1002 Dec 22 07:29 messages.log
drwxr-xr-x  2 root root    4096 Sep  5 13:22 old
-rw-r-----  1 root log      164 Dec 22 07:29 syslog.log
-rw-r-----  1 root log      128 Dec 22 07:29 user.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log
-rw-r--r--  1 root root    7876 Dec 22 07:29 Xorg.0.log.old
-rw-r--r--  1 root root    8023 Dec 22 07:27 Xorg.3.log


Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/20-Var-04/log/dmesg/
total 100
drwxr-xr-x 2 git  git   4096 Dec 22 07:27 .
drwxr-xr-x 9 root root  4096 Dec 22 07:29 ..
-rwxr--r-- 1 git  git  91870 Dec 22 07:27 current
-rw-r--r-- 1 git  git      0 Dec 22 07:27 lock
-rw-r--r-- 1 git  git      0 Dec 22 07:27 state

Re: Artix installation

Reply #21 –
Quote from: Pebble – on
The dbus current file is in /(root) partition, attached as current-dbus.txt.
There is no dbus folder in /var partition, attaching current file in dmesg folder as current-dmesg.txt.


That makes no sense. The dbus-s6 script logs to /var/log/dbus. Something is terribly wrong here. What's the output of "s6-rc -a list" ?

Re: Artix installation

Reply #22 –
Quote from: Dudemanguy – on
That makes no sense. The dbus-s6 script logs to /var/log/dbus. Something is terribly wrong here. What's the output of "s6-rc -a list" ?

When stuck at boot process, the ttys are not available. Ctrl+Alt+F1~7 not responding. Caps Lock key can toggle the LED, keyboard recognized by Artix.

-------------------------------------------------------------------------
artix-xfce-s6-20201211-x86_64.iso installation does have ttys, please refer to OP and reply #7. These are all obtained from artix-xfce-s6-20201211-x86_64.iso installation.
s6-rc -a list output before manually lauching lightdm:
Code: [Select]
s6rc-oneshot-runner
s6rc-fdholder
acpid-log
acpid-srv
agetty-tty2
agetty-tty3
agetty-tty4
agetty-tty5
agetty-tty6
bluetoothd-log
bluetoothd-srv
connmand-log
connmand-srv
cronie-log
cronie-srv
dbus-log
dbus-srv
lvmetad-log
lvmetad-srv
lvmpolld-log
lvmpolld-srv
syslog-ng-log
syslog-ng-srv
udevd-log
udevd-srv
binfmt
cleanup
console-setup
cryptsetup
dmesg
hostname
hwclock
kmod-static-nodes
lvm2-monitor
lvm2-pvscan
modules
mount-cgroups
mount-devfs
mount-filesystems
mount-net
mount-procfs
mount-sysfs
net-lo
random-seed
rc-local
remount-root
swap
sysctl
sysuser
tmpfiles-dev
tmpfiles-setup
udevadm

s6-rc -a list output after manually lauching lightdm, in xfce desktop:
Code: [Select]
s6rc-oneshot-runner
s6rc-fdholder
acpid-log
acpid-srv
agetty-tty2
agetty-tty3
agetty-tty4
agetty-tty5
agetty-tty6
bluetoothd-log
bluetoothd-srv
connmand-log
connmand-srv
cronie-log
cronie-srv
dbus-log
dbus-srv
elogind-log
elogind-srv
lightdm-log
lightdm-srv
lvmetad-log
lvmetad-srv
lvmpolld-log
lvmpolld-srv
syslog-ng-log
syslog-ng-srv
udevd-log
udevd-srv
binfmt
cleanup
console-setup
cryptsetup
dmesg
hostname
hwclock
kmod-static-nodes
lvm2-monitor
lvm2-pvscan
modules
mount-cgroups
mount-devfs
mount-filesystems
mount-net
mount-procfs
mount-sysfs
net-lo
random-seed
rc-local
remount-root
swap
sysctl
sysuser
tmpfiles-dev
tmpfiles-setup
udevadm


log/dbus  folder only exists in root partition.
/(root) partition log folder:
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/02-Artix.s-01213/var/log/
total 241
drwxr-xr-x 15 root root  3488 Dec 14 13:56 .
drwxr-xr-x  4 root root  3488 Dec 13 13:52 ..
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 acpid
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 bluetoothd
-rw-------  1 root utmp     0 Dec 13 13:52 btmp
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 connmand
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 cronie
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 dbus
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 elogind
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 lightdm
drwxr-xr-x  2 git  git   3488 Dec 13 13:52 lvm2-monitor
drwxr-xr-x  2 git  git   3488 Dec 13 13:52 lvm2-pvscan
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 lvmetad
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 lvmpolld
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 syslog-ng
drwxr-xr-x  2 git  git   3488 Dec 14 13:56 udevd
-rw-rw-r--  1 root utmp 20352 Dec 23 10:52 wtmp
-rw-r--r--  1 root root 28864 Dec 14 13:58 Xorg.0.log
-rw-r--r--  1 root root 27342 Dec 14 10:48 Xorg.0.log.old
-rw-r--r--  1 root root  8157 Dec 14 13:56 Xorg.1.log
-rw-r--r--  1 root root  8157 Dec 14 13:56 Xorg.1.log.old
-rw-r--r--  1 root root  8066 Dec 14 13:56 Xorg.2.log
-rw-r--r--  1 root root  8248 Dec 14 13:56 Xorg.2.log.old
-rw-r--r--  1 root root  8248 Dec 14 13:56 Xorg.3.log
-rw-r--r--  1 root root  8337 Dec 14 13:56 Xorg.3.log.old
-rw-r--r--  1 root root  8066 Dec 14 13:56 Xorg.4.log
-rw-r--r--  1 root root  8430 Dec 14 13:56 Xorg.4.log.old
-rw-r--r--  1 root root  8157 Dec 14 13:56 Xorg.5.log
-rw-r--r--  1 root root  8339 Dec 13 13:59 Xorg.5.log.old
-rw-r--r--  1 root root  8066 Dec 14 13:56 Xorg.6.log
Inspiron1545:[sukha]:~/Desktop$


/var partition log folder:
Code: [Select]
Inspiron1545:[sukha]:~/Desktop$ ls -al /run/media/sukha/18-Var-02/log/
total 228
drwxr-xr-x 10 root root  4096 Dec 23 10:53 .
drwxr-xr-x 13 root root  4096 Dec 10 17:56 ..
drwx------  2 root root  4096 Nov 12 02:18 audit
-rw-r-----  1 root log  15992 Dec 23 10:58 auth.log
-rw-r-----  1 root log   1897 Dec 23 10:58 crond.log
-rw-r-----  1 root log  17480 Dec 23 10:58 daemon.log
drwxr-xr-x  2 git  git   4096 Dec 13 13:52 dmesg
drwxr-xr-x  2 git  git   4096 Dec 14 14:00 elogind
-rw-r-----  1 root log    209 Dec 23 10:46 errors.log
-rw-r-----  1 root log  23408 Dec 23 10:58 everything.log
drwxr-xr-x  2 root root  4096 Apr 18  2020 gssproxy
-rw-r-----  1 root log   1411 Dec 23 10:58 kernel.log
drwx--x--x  2 git  git   4096 Dec 23 10:53 lightdm
drwxr-xr-x  2 git  git   4096 Dec 13 13:54 lvm2-monitor
drwxr-xr-x  2 git  git   4096 Dec 13 13:54 lvm2-pvscan
-rw-r-----  1 root log  19905 Dec 23 10:58 messages.log
drwxr-xr-x  2 root root  4096 Sep  5 13:22 old
-rw-r-----  1 root log   1397 Dec 23 10:58 syslog.log
-rw-r-----  1 root log   1223 Dec 14 14:00 user.log
-rw-r--r--  1 root root 28763 Dec 23 10:58 Xorg.0.log
-rw-r--r--  1 root root 28523 Dec 14 14:01 Xorg.0.log.old
-rw-r--r--  1 root root  7876 Dec 14 13:56 Xorg.1.log
-rw-r--r--  1 root root  7783 Dec 14 10:48 Xorg.1.log.old
-rw-r--r--  1 root root  7876 Dec 13 13:59 Xorg.2.log
Inspiron1545:[sukha]:~/Desktop$


/var/log/dbus folder not visible from within artix-xfce-s6-20201211-x86_64.iso installation, shielded by /var partition.
Code: [Select]
Inspiron:[sukha]:~$ ls -al /var/log/
total 248
drwxr-xr-x 10 root  root     4096 Dec 23 10:53 .
drwxr-xr-x 13 root  root     4096 Dec 10 17:56 ..
drwx------  2 root  root     4096 Nov 12 02:18 audit
-rw-r-----  1 root  log     18638 Dec 23 15:54 auth.log
-rw-r-----  1 root  log      2107 Dec 23 11:26 crond.log
-rw-r-----  1 root  log     20150 Dec 23 15:54 daemon.log
drwxr-xr-x  2 s6log s6log    4096 Dec 13 13:52 dmesg
drwxr-xr-x  2 s6log s6log    4096 Dec 14 14:00 elogind
-rw-r-----  1 root  log       331 Dec 23 11:26 errors.log
-rw-r-----  1 root  log     26955 Dec 23 15:55 everything.log
drwxr-xr-x  2 root  root     4096 Apr 18  2020 gssproxy
-rw-r-----  1 root  log      1669 Dec 23 15:55 kernel.log
drwx--x--x  2 root  lightdm  4096 Dec 23 10:53 lightdm
drwxr-xr-x  2 s6log s6log    4096 Dec 13 13:54 lvm2-monitor
drwxr-xr-x  2 s6log s6log    4096 Dec 13 13:54 lvm2-pvscan
-rw-r-----  1 root  log     22711 Dec 23 15:55 messages.log
drwxr-xr-x  2 root  root     4096 Sep  5 13:22 old
-rw-r-----  1 root  log      1806 Dec 23 15:53 syslog.log
-rw-r-----  1 root  log      1223 Dec 14 14:00 user.log
-rw-r--r--  1 root  root    28763 Dec 23 10:58 Xorg.0.log
-rw-r--r--  1 root  root    28523 Dec 14 14:01 Xorg.0.log.old
-rw-r--r--  1 root  root     7876 Dec 14 13:56 Xorg.1.log
-rw-r--r--  1 root  root     7783 Dec 14 10:48 Xorg.1.log.old
-rw-r--r--  1 root  root     7876 Dec 13 13:59 Xorg.2.log


The /var/run symlink is on /var partition, access denied, maybe too early.

Re: Artix installation

Reply #23 –
                                                 2020.12.23.23:27:30 UT

Artix iso test installation report:

artix-lxqt-s6-20201219-x86_64.iso: install successful, boot successful.

    My only problem with this ISO was:

    1) s6-init not correctly starting sddm.

    I continued with my project on the 20AWS3MS00 ThinkPad T440p with
Intel i5-4300M(x4) 3.3GHz CPU and Intel HD4600 GPU.  The installation
and subsequent boot went fine, so the python-lib difficulty inside
calamares is now fixed.  The only difficulty was that sddm would
not log me in when I supplied my uname:psswd.  I pursued the path
described earlier in this thread by pebble, and issued commands
from the Ctl-Alt-F1 runlevel:

    root:> s6-rc-bundle-update delete default sddm
    root:> reboot
    -----------------------
    root:> s6-rc -u change sddm

The sddm/lxqt desktop then started successfully, and I was able to
log-in to lxqt.  That minor trouble still exists with the way in
which s6-init tries to start sddm, meaning that every time I now
boot to runlevel one and start sddm manually via "s6-rc -u change
sddm".  So, after starting the desktop manager I got a fully
functional connman network manager, and my few personalizations
(udevil, emacs, mc, gkrellm) installed successfully and updates went
forward with no problems.

    I have a fully functioning Artix distribution arising from the
artix-lxqt-s6-20201219-x86_64.iso easy installation tool. Cool.

gbarrick

Re: Artix installation

Reply #24 –
Put these in /etc/rc.local:
Code: [Select]
s6-rc -d change sddm
s6-rc -u change sddm
So, hopefully, you won't need to do it manually. If it still fails, add a 'sleep 5' line before. We're still working on a fix in s6.

Re: Artix installation

Reply #25 –
                                                  2020.12.24.18:00:47 UT
Hi nous,

           I tried the startup in rc.local that you described.  After a few attempts I
got up to:

<file: rc.local >
sleep 20
s6-rc -d change sddm
sleep 20
s6-rc -u change sddm
</file>

but the system still issues me two copies of the warning:

s6-rc: fatal: unable to take locks: Resource temporarily unavailable

at the Ctl-Alt-F1 runlevel.  Perhaps the M.2 SSD that I am using is
just a bit too fast.  Anyway, I am fine with starting the sddm manually
for now.

       I did putter around inside /var/log for a while, and looked carefully
at /var/log/dbus/current, but none of the logs that I examined seemed to
reflect the difficulty involving s6-rc and the display manager.  If you and
dudemanguy name a particular log-file for me to monitor, I can certainly
include that on my next post.

gbarrick

Re: Artix installation

Reply #26 –
Quote from: gbarrick – on
                                                  2020.12.24.18:00:47 UT
s6-rc: fatal: unable to take locks: Resource temporarily unavailable

I also get same warning if issue s6-rc without sudo, maybe privilege.
I take back above line.
I put "ntpd -q" in rc.local and the command ran, not privilege.

Also put
sleep 5
s6-rc -u change lightdm
in rc.local, got same result as gbarrick mentioned.

Re: Artix installation

Reply #27 –
                                                 2020.12.27.00:43:37 UT

Artix iso test installation report:

artix-lxqt-s6-20201222-x86_64.iso: install successful, boot successful.

    My only problem with this ISO again was:

    1) s6-init not correctly starting sddm.

    I tried the latest weekly iso, and got the same difficulty as
before: sddm would not log me in when I supplied my uname:psswd.
The approach where I remove sddm from the s6-rc-bundle, and then
start sddm manually again works to give me a usable desktop
environment:

    root:> s6-rc-bundle-update delete default sddm
    root:> reboot
    -----------------------
    root:> s6-rc -u change sddm

    I have a fully functioning Artix distribution arising from the
artix-lxqt-s6-2020122-x86_64.iso easy installation tool.  I have
included my Xorg.0.log and /var/log/dbus/current files in their
state immediately after the failed log-in, just in case they yield
any useful information.

gbarrick

/var/log/Xorg.0.log
Code: [Select]
[     5.751] (--) Log file renamed from "/var/log/Xorg.pid-783.log" to "/var/log/Xorg.0.log"
[     5.751] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[     5.752] 
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[     5.752] Build Operating System: Linux Artix Linux
[     5.752] Current Operating System: Linux roc810 5.9.14-artix1-1 #1 SMP PREEMPT Sat, 12 Dec 2020 22:57:38 +0000 x86_64
[     5.752] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=f626efb9-73d5-468b-8eb1-6d847f6f7aae rw rootflags=subvol=@ net.ifnames=0 quiet
[     5.752] Build Date: 14 December 2020  12:57:17PM
[     5.752]  
[     5.752] Current version of pixman: 0.40.0
[     5.752] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.752] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.752] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 18:55:16 2020
[     5.753] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.753] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.753] (==) No Layout section.  Using the first Screen section.
[     5.753] (==) No screen section available. Using defaults.
[     5.753] (**) |-->Screen "Default Screen Section" (0)
[     5.753] (**) |   |-->Monitor "<default monitor>"
[     5.754] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.754] (==) Automatically adding devices
[     5.754] (==) Automatically enabling devices
[     5.754] (==) Automatically adding GPU devices
[     5.754] (==) Automatically binding GPU devices
[     5.754] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.755] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     5.755] 	Entry deleted from font path.
[     5.755] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     5.755] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.755] 	Entry deleted from font path.
[     5.755] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.755] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.755] 	Entry deleted from font path.
[     5.755] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.755] 	Entry deleted from font path.
[     5.755] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.755] 	Entry deleted from font path.
[     5.755] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.755] 	Entry deleted from font path.
[     5.755] (==) FontPath set to:
	
[     5.755] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.755] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.755] (II) Module ABI versions:
[     5.755] 	X.Org ANSI C Emulation: 0.4
[     5.755] 	X.Org Video Driver: 24.1
[     5.755] 	X.Org XInput driver : 24.1
[     5.755] 	X.Org Server Extension : 10.0
[     5.756] (++) using VT number 7

[     5.756] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.756] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.925] (--) PCI:*(0@0:2:0) 8086:0416:17aa:220e rev 6, Mem @ 0xe0000000/4194304, 0xc0000000/536870912, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     5.925] (II) Open ACPI successful (/var/run/acpid.socket)
[     5.925] (II) LoadModule: "glx"
[     5.931] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.941] (II) Module glx: vendor="X.Org Foundation"
[     5.941] 	compiled for 1.20.10, module version = 1.0.0
[     5.941] 	ABI class: X.Org Server Extension, version 10.0
[     5.941] (==) Matched intel as autoconfigured driver 0
[     5.941] (==) Matched modesetting as autoconfigured driver 1
[     5.941] (==) Matched fbdev as autoconfigured driver 2
[     5.941] (==) Matched vesa as autoconfigured driver 3
[     5.941] (==) Assigned the driver to the xf86ConfigLayout
[     5.941] (II) LoadModule: "intel"
[     5.941] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.949] (II) Module intel: vendor="X.Org Foundation"
[     5.949] 	compiled for 1.20.9, module version = 2.99.917
[     5.949] 	Module class: X.Org Video Driver
[     5.949] 	ABI class: X.Org Video Driver, version 24.1
[     5.949] (II) LoadModule: "modesetting"
[     5.949] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.953] (II) Module modesetting: vendor="X.Org Foundation"
[     5.953] 	compiled for 1.20.10, module version = 1.20.10
[     5.953] 	Module class: X.Org Video Driver
[     5.953] 	ABI class: X.Org Video Driver, version 24.1
[     5.953] (II) LoadModule: "fbdev"
[     5.953] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.954] (II) Module fbdev: vendor="X.Org Foundation"
[     5.954] 	compiled for 1.20.8, module version = 0.5.0
[     5.954] 	Module class: X.Org Video Driver
[     5.954] 	ABI class: X.Org Video Driver, version 24.1
[     5.954] (II) LoadModule: "vesa"
[     5.954] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.955] (II) Module vesa: vendor="X.Org Foundation"
[     5.955] 	compiled for 1.20.9, module version = 2.5.0
[     5.955] 	Module class: X.Org Video Driver
[     5.955] 	ABI class: X.Org Video Driver, version 24.1
[     5.955] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.955] (II) intel: Driver for Intel(R) HD Graphics
[     5.955] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     5.955] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     5.955] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.955] (II) FBDEV: driver for framebuffer: fbdev
[     5.955] (II) VESA: driver for VESA chipsets: vesa
[     6.125] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200715
[     6.125] (II) intel(0): SNA compiled from 2.99.917-913-g9236c582
[     6.140] (WW) Falling back to old probe method for modesetting
[     6.140] (WW) Falling back to old probe method for fbdev
[     6.140] (II) Loading sub module "fbdevhw"
[     6.140] (II) LoadModule: "fbdevhw"
[     6.141] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.144] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.144] 	compiled for 1.20.10, module version = 0.0.2
[     6.144] 	ABI class: X.Org Video Driver, version 24.1
[     6.144] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[     6.144] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     6.144] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.144] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.144] (==) intel(0): RGB weight 888
[     6.144] (==) intel(0): Default visual is TrueColor
[     6.145] (II) intel(0): Output eDP1 has no monitor section
[     6.145] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     6.145] (II) intel(0): Enabled output eDP1
[     6.145] (II) intel(0): Output VGA1 has no monitor section
[     6.145] (II) intel(0): Enabled output VGA1
[     6.145] (II) intel(0): Output DP1 has no monitor section
[     6.145] (II) intel(0): Enabled output DP1
[     6.145] (II) intel(0): Output HDMI1 has no monitor section
[     6.145] (II) intel(0): Enabled output HDMI1
[     6.145] (II) intel(0): Output DP2 has no monitor section
[     6.145] (II) intel(0): Enabled output DP2
[     6.145] (II) intel(0): Output HDMI2 has no monitor section
[     6.145] (II) intel(0): Enabled output HDMI2
[     6.145] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.146] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.146] (II) intel(0): Enabled output VIRTUAL1
[     6.146] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[     6.146] (==) intel(0): TearFree disabled
[     6.146] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.146] (==) intel(0): DPI set to (96, 96)
[     6.146] (II) Loading sub module "dri3"
[     6.146] (II) LoadModule: "dri3"
[     6.146] (II) Module "dri3" already built-in
[     6.146] (II) Loading sub module "dri2"
[     6.146] (II) LoadModule: "dri2"
[     6.146] (II) Module "dri2" already built-in
[     6.146] (II) Loading sub module "present"
[     6.146] (II) LoadModule: "present"
[     6.146] (II) Module "present" already built-in
[     6.146] (II) UnloadModule: "modesetting"
[     6.146] (II) Unloading modesetting
[     6.146] (II) UnloadModule: "fbdev"
[     6.146] (II) Unloading fbdev
[     6.146] (II) UnloadSubModule: "fbdevhw"
[     6.146] (II) Unloading fbdevhw
[     6.146] (II) UnloadModule: "vesa"
[     6.146] (II) Unloading vesa
[     6.146] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     6.146] (==) intel(0): Backing store enabled
[     6.146] (==) intel(0): Silken mouse disabled
[     6.147] (II) intel(0): HW Cursor enabled
[     6.147] (==) intel(0): DPMS enabled
[     6.147] (==) intel(0): Display hotplug detection enabled
[     6.147] (II) intel(0): [DRI2] Setup complete
[     6.147] (II) intel(0): [DRI2]   DRI driver: i965
[     6.147] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     6.147] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     6.147] (II) intel(0): hardware support for Present enabled
[     6.147] (II) Initializing extension Generic Event Extension
[     6.147] (II) Initializing extension SHAPE
[     6.147] (II) Initializing extension MIT-SHM
[     6.147] (II) Initializing extension XInputExtension
[     6.147] (II) Initializing extension XTEST
[     6.147] (II) Initializing extension BIG-REQUESTS
[     6.147] (II) Initializing extension SYNC
[     6.147] (II) Initializing extension XKEYBOARD
[     6.147] (II) Initializing extension XC-MISC
[     6.147] (II) Initializing extension SECURITY
[     6.147] (II) Initializing extension XFIXES
[     6.147] (II) Initializing extension RENDER
[     6.147] (II) Initializing extension RANDR
[     6.147] (II) Initializing extension COMPOSITE
[     6.147] (II) Initializing extension DAMAGE
[     6.147] (II) Initializing extension MIT-SCREEN-SAVER
[     6.147] (II) Initializing extension DOUBLE-BUFFER
[     6.147] (II) Initializing extension RECORD
[     6.147] (II) Initializing extension DPMS
[     6.147] (II) Initializing extension Present
[     6.147] (II) Initializing extension DRI3
[     6.147] (II) Initializing extension X-Resource
[     6.147] (II) Initializing extension XVideo
[     6.147] (II) Initializing extension XVideo-MotionCompensation
[     6.147] (II) Initializing extension GLX
[     6.199] (II) AIGLX: Loaded and initialized i965
[     6.199] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.199] (II) Initializing extension XFree86-VidModeExtension
[     6.199] (II) Initializing extension XFree86-DGA
[     6.199] (II) Initializing extension XFree86-DRI
[     6.199] (II) Initializing extension DRI2
[     6.204] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.206] (II) intel(0): Setting screen physical size to 423 x 238
[     6.238] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.238] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.238] (**) Power Button: Applying InputClass "system-keyboard"
[     6.238] (II) LoadModule: "libinput"
[     6.238] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.242] (II) Module libinput: vendor="X.Org Foundation"
[     6.242] 	compiled for 1.20.8, module version = 0.30.0
[     6.242] 	Module class: X.Org XInput Driver
[     6.242] 	ABI class: X.Org XInput driver, version 24.1
[     6.242] (II) Using input driver 'libinput' for 'Power Button'
[     6.242] (**) Power Button: always reports core events
[     6.242] (**) Option "Device" "/dev/input/event2"
[     6.242] (**) Option "_source" "server/udev"
[     6.247] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.247] (II) event2  - Power Button: device is a keyboard
[     6.247] (II) event2  - Power Button: device removed
[     6.267] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.267] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.267] (**) Option "xkb_layout" "us"
[     6.267] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.267] (II) event2  - Power Button: device is a keyboard
[     6.268] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[     6.268] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.268] (**) Video Bus: Applying InputClass "system-keyboard"
[     6.268] (II) Using input driver 'libinput' for 'Video Bus'
[     6.268] (**) Video Bus: always reports core events
[     6.268] (**) Option "Device" "/dev/input/event14"
[     6.268] (**) Option "_source" "server/udev"
[     6.268] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.268] (II) event14 - Video Bus: device is a keyboard
[     6.268] (II) event14 - Video Bus: device removed
[     6.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event14"
[     6.330] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.330] (**) Option "xkb_layout" "us"
[     6.331] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.331] (II) event14 - Video Bus: device is a keyboard
[     6.331] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.331] (II) No input driver specified, ignoring this device.
[     6.331] (II) This device may have been added with another device file.
[     6.331] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.331] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.331] (**) Sleep Button: Applying InputClass "system-keyboard"
[     6.331] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.331] (**) Sleep Button: always reports core events
[     6.331] (**) Option "Device" "/dev/input/event1"
[     6.331] (**) Option "_source" "server/udev"
[     6.332] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     6.332] (II) event1  - Sleep Button: device is a keyboard
[     6.332] (II) event1  - Sleep Button: device removed
[     6.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.357] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.357] (**) Option "xkb_layout" "us"
[     6.357] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     6.358] (II) event1  - Sleep Button: device is a keyboard
[     6.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event17)
[     6.358] (II) No input driver specified, ignoring this device.
[     6.358] (II) This device may have been added with another device file.
[     6.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[     6.358] (II) No input driver specified, ignoring this device.
[     6.358] (II) This device may have been added with another device file.
[     6.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event19)
[     6.358] (II) No input driver specified, ignoring this device.
[     6.358] (II) This device may have been added with another device file.
[     6.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event20)
[     6.358] (II) No input driver specified, ignoring this device.
[     6.358] (II) This device may have been added with another device file.
[     6.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event21)
[     6.358] (II) No input driver specified, ignoring this device.
[     6.358] (II) This device may have been added with another device file.
[     6.359] (II) config/udev: Adding input device USB Mouse (/dev/input/event4)
[     6.359] (**) USB Mouse: Applying InputClass "libinput pointer catchall"
[     6.359] (II) Using input driver 'libinput' for 'USB Mouse'
[     6.359] (**) USB Mouse: always reports core events
[     6.359] (**) Option "Device" "/dev/input/event4"
[     6.359] (**) Option "_source" "server/udev"
[     6.414] (II) event4  - USB Mouse: is tagged by udev as: Mouse
[     6.414] (II) event4  - USB Mouse: device is a pointer
[     6.414] (II) event4  - USB Mouse: device removed
[     6.477] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:0461:4D08.0001/input/input5/event4"
[     6.477] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE, id 9)
[     6.477] (**) Option "AccelerationScheme" "none"
[     6.477] (**) USB Mouse: (accel) selected scheme none/0
[     6.477] (**) USB Mouse: (accel) acceleration factor: 2.000
[     6.477] (**) USB Mouse: (accel) acceleration threshold: 4
[     6.534] (II) event4  - USB Mouse: is tagged by udev as: Mouse
[     6.534] (II) event4  - USB Mouse: device is a pointer
[     6.534] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[     6.534] (II) No input driver specified, ignoring this device.
[     6.534] (II) This device may have been added with another device file.
[     6.535] (II) config/udev: Adding input device USB Mouse (/dev/input/event5)
[     6.535] (II) No input driver specified, ignoring this device.
[     6.535] (II) This device may have been added with another device file.
[     6.535] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event13)
[     6.535] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     6.535] (**) Integrated Camera: Integrated C: Applying InputClass "system-keyboard"
[     6.535] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[     6.535] (**) Integrated Camera: Integrated C: always reports core events
[     6.535] (**) Option "Device" "/dev/input/event13"
[     6.535] (**) Option "_source" "server/udev"
[     6.535] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.535] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[     6.536] (II) event13 - Integrated Camera: Integrated C: device removed
[     6.597] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input15/event13"
[     6.597] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 10)
[     6.597] (**) Option "xkb_layout" "us"
[     6.598] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.599] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[     6.599] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event9)
[     6.599] (II) No input driver specified, ignoring this device.
[     6.599] (II) This device may have been added with another device file.
[     6.600] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[     6.600] (II) No input driver specified, ignoring this device.
[     6.600] (II) This device may have been added with another device file.
[     6.600] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event11)
[     6.600] (II) No input driver specified, ignoring this device.
[     6.600] (II) This device may have been added with another device file.
[     6.600] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[     6.600] (II) No input driver specified, ignoring this device.
[     6.600] (II) This device may have been added with another device file.
[     6.601] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[     6.601] (II) No input driver specified, ignoring this device.
[     6.601] (II) This device may have been added with another device file.
[     6.601] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     6.601] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.601] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     6.601] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.601] (**) AT Translated Set 2 keyboard: always reports core events
[     6.601] (**) Option "Device" "/dev/input/event3"
[     6.601] (**) Option "_source" "server/udev"
[     6.602] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.602] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.603] (II) event3  - AT Translated Set 2 keyboard: device removed
[     6.637] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     6.637] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     6.637] (**) Option "xkb_layout" "us"
[     6.637] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.638] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.638] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     6.638] (II) No input driver specified, ignoring this device.
[     6.638] (II) This device may have been added with another device file.
[     6.638] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[     6.638] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[     6.638] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[     6.638] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[     6.638] (**) ThinkPad Extra Buttons: always reports core events
[     6.638] (**) Option "Device" "/dev/input/event6"
[     6.638] (**) Option "_source" "server/udev"
[     6.639] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     6.639] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[     6.639] (II) event6  - ThinkPad Extra Buttons: device removed
[     6.663] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[     6.663] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[     6.663] (**) Option "xkb_layout" "us"
[     6.664] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     6.664] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[     6.664] (II) config/udev: Adding input device Synaptics tm2964-001 (/dev/input/event15)
[     6.664] (**) Synaptics tm2964-001: Applying InputClass "libinput touchpad catchall"
[     6.664] (II) Using input driver 'libinput' for 'Synaptics tm2964-001'
[     6.664] (**) Synaptics tm2964-001: always reports core events
[     6.664] (**) Option "Device" "/dev/input/event15"
[     6.665] (**) Option "_source" "server/udev"
[     6.665] (II) event15 - Synaptics tm2964-001: is tagged by udev as: Touchpad
[     6.666] (II) event15 - Synaptics tm2964-001: device is a touchpad
[     6.666] (II) event15 - Synaptics tm2964-001: device removed
[     6.717] (**) Option "config_info" "udev:/sys/devices/rmi4-00/input/input17/event15"
[     6.717] (II) XINPUT: Adding extended input device "Synaptics tm2964-001" (type: TOUCHPAD, id 13)
[     6.718] (**) Option "AccelerationScheme" "none"
[     6.718] (**) Synaptics tm2964-001: (accel) selected scheme none/0
[     6.718] (**) Synaptics tm2964-001: (accel) acceleration factor: 2.000
[     6.718] (**) Synaptics tm2964-001: (accel) acceleration threshold: 4
[     6.718] (II) event15 - Synaptics tm2964-001: is tagged by udev as: Touchpad
[     6.719] (II) event15 - Synaptics tm2964-001: device is a touchpad
[     6.719] (II) config/udev: Adding input device Synaptics tm2964-001 (/dev/input/mouse1)
[     6.719] (II) No input driver specified, ignoring this device.
[     6.719] (II) This device may have been added with another device file.
[     6.719] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event16)
[     6.719] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[     6.719] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[     6.719] (**) TPPS/2 IBM TrackPoint: always reports core events
[     6.719] (**) Option "Device" "/dev/input/event16"
[     6.719] (**) Option "_source" "server/udev"
[     6.719] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.720] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[     6.720] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[     6.783] (**) Option "config_info" "udev:/sys/devices/rmi4-00/rmi4-00.fn03/serio2/input/input18/event16"
[     6.783] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[     6.784] (**) Option "AccelerationScheme" "none"
[     6.784] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[     6.784] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[     6.784] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[     6.784] (II) event16 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.784] (II) event16 - TPPS/2 IBM TrackPoint: device is a pointer
[     6.785] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[     6.785] (II) No input driver specified, ignoring this device.
[     6.785] (II) This device may have been added with another device file.
[     6.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event20)
[     6.789] (II) No input driver specified, ignoring this device.
[     6.789] (II) This device may have been added with another device file.
[     6.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event17)
[     6.789] (II) No input driver specified, ignoring this device.
[     6.789] (II) This device may have been added with another device file.
[     6.790] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event19)
[     6.790] (II) No input driver specified, ignoring this device.
[     6.790] (II) This device may have been added with another device file.
[     6.790] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[     6.790] (II) No input driver specified, ignoring this device.
[     6.790] (II) This device may have been added with another device file.
[     6.790] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event21)
[     6.790] (II) No input driver specified, ignoring this device.
[     6.790] (II) This device may have been added with another device file.
[     8.149] (II) intel(0): EDID vendor "CMN", prod id 5250
[     8.149] (II) intel(0): Printing DDC gathered Modelines:
[     8.149] (II) intel(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1940  900 903 908 926 -hsync -vsync (55.6 kHz eP)
[    61.533] (II) event2  - Power Button: device removed
[    61.570] (II) event14 - Video Bus: device removed
[    61.637] (II) event1  - Sleep Button: device removed
[    61.663] (II) event4  - USB Mouse: device removed
[    61.717] (II) event13 - Integrated Camera: Integrated C: device removed
[    61.770] (II) event3  - AT Translated Set 2 keyboard: device removed
[    61.797] (II) event6  - ThinkPad Extra Buttons: device removed
[    61.823] (II) event15 - Synaptics tm2964-001: device removed
[    61.877] (II) event16 - TPPS/2 IBM TrackPoint: device removed
[    61.930] (II) AIGLX: Suspending AIGLX clients for VT switch
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.127] (II) UnloadModule: "libinput"
[   473.128] (II) UnloadModule: "libinput"
[   473.130] (II) Server terminated successfully (0). Closing log file.

/var/log/dbus/current
Code: [Select]
2020-12-26 18:55:14.864031014  dbus-daemon[421]: [system] Activating service name='net.connman.vpn' requested by ':1.2' (uid=0 pid=553 comm="connmand -n ") (using servicehelper)
2020-12-26 18:55:14.867921143  dbus-daemon[421]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=553 comm="connmand -n ") (using servicehelper)
2020-12-26 18:55:14.918569374  dbus-daemon[421]: [system] Successfully activated service 'net.connman.vpn'
2020-12-26 18:55:14.921505813  connman-vpnd[624]: Connection Manager VPN daemon version 1.38
2020-12-26 18:55:14.940960243  dbus-daemon[421]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
2020-12-26 18:55:14.941310898  Successfully initialized wpa_supplicant
2020-12-26 18:55:14.943281782  connman-vpnd[624]: Can't load /usr/lib/connman/plugins-vpn/wireguard.so: /usr/lib/connman/plugins-vpn/wireguard.so: undefined symbol: __vpn_ipconfig_foreach
2020-12-26 18:55:14.943521015  connman-vpnd[624]: lo {newlink} index 1 operstate 0 <UNKNOWN>
2020-12-26 18:55:15.026292104  connman-vpnd[624]: eth0 {create} index 2 type 1 <ETHER>
2020-12-26 18:55:15.026298271  connman-vpnd[624]: eth0 {update} flags 4098 <DOWN>
2020-12-26 18:55:15.026300188  connman-vpnd[624]: eth0 {newlink} index 2 address 68:F7:28:0C:BB:E7 mtu 1500
2020-12-26 18:55:15.026302757  connman-vpnd[624]: eth0 {newlink} index 2 operstate 2 <DOWN>
2020-12-26 18:55:15.218788497  connman-vpnd[624]: eth0 {update} flags 36867 <UP>
2020-12-26 18:55:15.218792880  connman-vpnd[624]: eth0 {newlink} index 2 address 68:F7:28:0C:BB:E7 mtu 1500
2020-12-26 18:55:15.218794520  connman-vpnd[624]: eth0 {newlink} index 2 operstate 2 <DOWN>
2020-12-26 18:55:15.728469655  connman-vpnd[624]: wlan0 {create} index 3 type 1 <ETHER>
2020-12-26 18:55:15.728474909  connman-vpnd[624]: wlan0 {update} flags 4098 <DOWN>
2020-12-26 18:55:15.728476925  connman-vpnd[624]: wlan0 {newlink} index 3 address E8:B1:FC:9C:E8:52 mtu 1500
2020-12-26 18:55:15.728478498  connman-vpnd[624]: wlan0 {newlink} index 3 operstate 2 <DOWN>
2020-12-26 19:03:04.424084252  connman-vpnd[624]: eth0 {update} flags 36866 <DOWN>
2020-12-26 19:03:04.424111883  connman-vpnd[624]: eth0 {newlink} index 2 address 68:F7:28:0C:BB:E7 mtu 1500
2020-12-26 19:03:04.424113629  connman-vpnd[624]: eth0 {newlink} index 2 operstate 2 <DOWN>
2020-12-26 19:03:04.632925682  connman-vpnd[624]: D-Bus disconnect
2020-12-26 19:03:04.645121320  connman-vpnd[624]: eth0 {remove} index 2
2020-12-26 19:03:04.645158093  connman-vpnd[624]: wlan0 {remove} index 3
2020-12-26 19:03:04.645160617  connman-vpnd[624]: Exit

Re: Artix installation

Reply #28 –
You last Xorg log looks fine, so perhaps sddm is running but without switching your TTY. You don't have to put a sleep delay before starting sddm. I want you to try this in rc.local:
Code: [Select]
sleep 5
s6-rc -d change sddm
s6-rc -u change sddm
and press Alt-F7 once boot is complete (or Alt-F1 though F7). If this succeeds, append chvt 7 to your rc.local.

Re: Artix installation

Reply #29 –
                                                             2020.12.27.15:10:30 UT
Hi,

          I still get the complaint:

s6-rc: fatal: unable to take locks: Resource temporarily unavailable
s6-rc: fatal: unable to take locks: Resource temporarily unavailable

when I try to change over to sddm from the rc.local script:

<file: /etc/rc.local />
sleep 5
s6-rc -d change sddm
s6-rc -u change sddm
</file>

This behavior persists when I crank the sleep number up to 10, 20 or 40.
I do not get the sddm in runlevel 7.  It could still be my own stupidity, but
so far the only path that works for me is to issue the "root> s6-rc -u change sddm"
when I login at runlevel 1.   I'm aware that the rc.local  is _the_same_thing_
as what I'm doing 'manually', but it does not work.

gbarrick